Summary of the content on the page No. 1
VideoJet 8008 / VideoJet 8004
Summary of the content on the page No. 2
Copyright This manual is copyright protected by Bosch Security Systems. All rights reserved. No part of this document may be reproduced or transmitted for any purpose, by whatever method and by whatever means, electronically or mechan- ically, without the express written permission of Bosch Security Systems. Issue: July 2006 (Software version 1.5) © Copyright 2006 Bosch Security Systems Note This manual has been prepared with all due care and all information contained in it has been thoroughl
Summary of the content on the page No. 3
VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual EN | 3 Content 0 Chapter 1 Preface Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 EU Directives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Rating plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Chapter 2 Safety i
Summary of the content on the page No. 4
EN | 4 Installation and Operating Manual | VideoJet 8008 / VideoJet 8004 Recording video sequences . . . . . . . . . . . . . . . . . . . . . . . . . . .124 Running recording program . . . . . . . . . . . . . . . . . . . . . . . . . . .125 The MEDIA-REPLAY page . . . . . . . . . . . . . . . . . . . . . . . . . . .126 Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130 Installing MPEG viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
Summary of the content on the page No. 5
VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual EN | 5 Preface 1 This manual is intended for persons responsible for the installation and opera- tion of the VideoJet 8008 or VideoJet 8004. International, national and any regional electrical engineering regulations must be followed at all times. Rele- vant knowledge of network technology is required. The manual describes the installation and operation of the unit. Conventions In this manual, the following symbols and notations
Summary of the content on the page No. 6
EN | 6 Installation and Operating Manual | VideoJet 8008 / VideoJet 8004 Intended use The VideoJet 8008 and VideoJet 8004 network video servers transmit video and control signals over data networks (Ethernet LAN, Internet). The integrated hard drive allows you to use the device as a DVR. Audio signals can also be trans- mitted with the audio versions of the units. The units are designed for use in CCTV systems. Various functions can be triggered automatically by incorporat- ing external alarm
Summary of the content on the page No. 7
VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual EN | 7 Safety information 2 Electric shock hazard ❚ Never attempt to connect the unit to any power network other than the type for which it is intended. ❚ Never open the housing. ❚ If a fault occurs, disconnect the unit from the power supply and from all other units. ❚ Install the unit only in dry, weather-protected locations. ❚ If safe operation of the unit cannot be ensured, remove it from service and secure it to prevent una
Summary of the content on the page No. 8
EN | 8 Installation and Operating Manual | VideoJet 8008 / VideoJet 8004 Installation and operation ❚ The relevant electrical engineering regulations and guidelines must be com- plied with at all times during installation. ❚ Relevant knowledge of network technology is required to install the unit. ❚ Before installing or operating the unit, make sure you have read and under- stood the documentation for the other equipment connected to it, such as cameras. The documentation contains important saf
Summary of the content on the page No. 9
VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual EN | 9 Product description 3 Components supplied ❚ VideoJet 8008 or VideoJet 8004 network video server (basic version or audio version) ❚ Power supply cable ❚ Configuration cable ❚ Mounting kit for installation in 19-inch racks ❚ Quick Installation Guide ❚ Product CD with the following content: – Quick Installation Guide – Manual – System Requirements document – MPEG ActiveX control – MPEG viewer – DirectX control – Microsoft Int
Summary of the content on the page No. 10
EN | 10 Installation and Operating Manual | VideoJet 8008 / VideoJet 8004 Configuration requirements ❚ Computer with Windows 2000/XP operating system, access to a network and Microsoft Internet Explorer (version 6.0 or higher) or ❚ Computer with Windows 2000/XP operating system, access to a network and receiver software, such as VIDOS Note Also note the information in the System Requirements document on the product CD supplied. Make sure the graphics card is set to 16- or 32-bit color depth a
Summary of the content on the page No. 11
VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual EN | 11 Overview of functions Network video server VideoJet 8008 and VideoJet 8004 are network video servers for eight indepen- dent video channels. They are primarily designed for encoding video and control data for transmission over an IP network. With the audio versions, audio signals can also be transmitted to and from compatible units. The use of existing net- works means that integration with CCTV systems or local networks
Summary of the content on the page No. 12
EN | 12 Installation and Operating Manual | VideoJet 8008 / VideoJet 8004 Multicast In suitably configured networks, the multicast function enables simultaneous real-time video transmission to multiple receivers. The UDP and IGMP V2 pro- tocols must be implemented on the network for this function. DVR The integrated hard drive means that VideoJet 8008 and VideoJet 8004 can be used as digital video recorders for local long-term recording. Both units support ANR technology, which guarantees sea
Summary of the content on the page No. 13
VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual EN | 13 Summary VideoJet 8008 and VideoJet 8004 offer the following main functions: ❚ Video and data transmission over IP data networks ❚ Dual Streaming function for every encoder to allow simultaneous encoding based on two individually definable profiles (only VideoJet 8008) ❚ Multicast function for simultaneous image transmission to multiple receivers ❚ Eight independent analog BNC composite video inputs (PAL/NTSC) ❚ Video enco
Summary of the content on the page No. 14
EN | 14 Installation and Operating Manual | VideoJet 8008 / VideoJet 8004 Connections on the rear panel 1 Eight audio ports (Mono): Audio 1 to Audio 8 (audio versions only) 3.5 mm stereo sockets for connecting audio cables 2 Additional terminal block (audio versions only) Relay outputs, serial interface, audio port for microphone and loudspeaker (speaking level) 3 Audio Out audio output (audio versions only) 3.5 mm stereo socket, stereo output with line-out level 4 RS232 serial interface (audio
Summary of the content on the page No. 15
VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual EN | 15 Front panel 10 Power LED lights up green when ready for operation 11 IR diode infrared receiver (for future function extensions) 12 HDD LED flashes red during data transmission to and from the hard drive 13 Fail LED flashes red during hardware error (defective fans) 14 Display for displaying operating parameters 15 Menu/Exit key for activating and deactivating the configuration menu 16 Set key for saving changes to the ope
Summary of the content on the page No. 16
EN | 16 Installation and Operating Manual | VideoJet 8008 / VideoJet 8004 Product description Bosch Security Systems | 2006-07 | V1.5
Summary of the content on the page No. 17
VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual EN | 17 Installation 4 VideoJet 8008 and VideoJet 8004 are designed as desktop units and intended for installation in a switch cabinet. Mounting in a 19-inch rack using the mounting kit supplied is a quick and easy operation. For desktop operation, four self-adhesive, non-slip rubber feet are included, which you can stick to the bottom of the unit. Caution The unit is designed for indoor operation. Select a suitable location fo
Summary of the content on the page No. 18
EN | 18 Installation and Operating Manual | VideoJet 8008 / VideoJet 8004 Installing in a switch cabinet VideoJet 8008 and VideoJet 8004 are set up for installation in a 19-inch rack. The necessary mounting kit is already supplied. Caution When installing in a switch cabinet, ensure that there is sufficient ventilation for each unit: There must be at least 5 cm (1.97 in.) of free space to the left and right of the unit and at least 10 cm (3.94 in.) at the rear. The ambient temperature must b
Summary of the content on the page No. 19
VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual EN | 19 Installation overview Bosch Security Systems | 2006-07 | V1.5 Installation
Summary of the content on the page No. 20
EN | 20 Installation and Operating Manual | VideoJet 8008 / VideoJet 8004 Connections Cameras You can connect a maximum of eight standard video sources (such as CCTV cameras). Any cameras and other video sources that produce a standard PAL or NTSC signal are suitable. Note On the VideoJet 8008, the maximum resolution at the complete image rate for each camera input is Full D1/4CIF. The VideoJet 8004 only supports the Full D1/4CIF resolution when every other camera input is assigned, that is
