Honeywell 512 user manual

User manual for the device Honeywell 512

Device: Honeywell 512
Category: Home Security System
Manufacturer: Honeywell
Size: 0.9 MB
Added : 6/7/2014
Number of pages: 36
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Honeywell 512. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Honeywell 512.

For your convenience

If looking through the Honeywell 512 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Honeywell 512 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Honeywell 512 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Honeywell 512 User manual - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Honeywell 512 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Honeywell 512. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Galaxy
8/18/60/128/500/504/512
User Guide
Honeywell Security

Summary of the content on the page No. 2

Table of Contents Introduction ------------------------------------------------------------------------------------------vii KEYPAD INFORMATION ---------------------------------------------------------------------------- 1 General ---------------------------------------------------------------------------------------------- 1 Number Keys (0 – 9) ----------------------------------------------------------------------------- 1 View Keys (A and B) ----------------------------------------------------

Summary of the content on the page No. 3

Quick Menu ---------------------------------------------------------------------------------------- 7 Accessing The Menu ----------------------------------------------------------------------------- 8 Full Menu ------------------------------------------------------------------------------------------- 8 Quick Menu ---------------------------------------------------------------------------------------- 8 Omit Zones (User Level 3 And Above) ---------------------------------------------------- 9 Pu

Summary of the content on the page No. 4

All --------------------------------------------------------------------------------------------------- 13 Help Message ------------------------------------------------------------------------------------ 13 Walk Test (User Level 5 and Above) ----------------------------------------------------- 14 Purpose -------------------------------------------------------------------------------------------- 14 Selecting Walk Test ----------------------------------------------------------------------------

Summary of the content on the page No. 5

AVOIDING FALSE ALARMS ---------------------------------------------------------------------- 26 ZONE REFERENCE TABLES---------------------------------------------------------------------- 27 ALARM AND HELP MESSAGES ---------------------------------------------------------------- 28 Other Keypad In Use (Galaxy 8 And 18 Only) --------------------------------------------- 28 Alarm In Progress -------------------------------------------------------------------------------- 28 PA Reset Required -----

Summary of the content on the page No. 6

INTRODUCTION The Galaxy alarm system is, in fact, a computer which has been designed using the latest software and hardware technology. First and foremost, the Galaxy meets all your security needs. The engineer will program and commission the system to your own exacting requirements. Warning: There are no user serviceable parts inside. Please refer all servicing to a qualified installer. vii

Summary of the content on the page No. 7

KEYPAD INFORMATION General The Galaxy Alarm system is controlled by Galaxy Mk7 Full Alpha Liquid Crystal Display (LCD) keypads. A maximum of 16 keypads may be connected to the Galaxy 8, 18 and 60 and 128 control panels. A maximum of 32 keypads may be attached to the Galaxy 500, 504 and 512 control panels. GALAXY 504 V4.00 LCD Display 08:58 TUE 22 NOV Number Keys A 1 2 3 View keys B 4 5 6 ent Enter Key 9 7 8 Star Key Escape Key esc 0 # * Hash Key Power LED Number Keys (0 – 9) These keys are us

Summary of the content on the page No. 8

Enter Key (ent) The ent key accepts and processes entered data. Valid actions are performed and the next option is accessed. Escape Key (esc) The esc key aborts the current option to return to the previous option level. Any option modification made prior to the option being aborted is erased. Successive pressing of the esc key returns the user to the start display (known as the BANNER). The esc key also aborts the setting routine if pressed during the exit time. Hash Key (#) The # key is used t

Summary of the content on the page No. 9

SETTING THE SYSTEM Before Setting Before setting the system ensure all doors and windows are secured and areas protected by movement detectors are free from obstruction. Entering A Pin - User Level 1-2 As each digit is entered the keypad responds with a bleep and displays a *. When all the digits are entered, press the ent or A > key to start the setting routine. Entering A Pin - User Level 3 - 6 As each digit is entered the keypad responds with a bleep and displa

Summary of the content on the page No. 10

Sounder During the setting period the sounder emits a continuous tone if all of the zones are closed. If a zone is opened during the setting period, the sounder begins to pulse. The sounder also pulses during the last 25% of the setting time to indicate time running short. Zones Open The exit time will reset should any zones be open or opened during setting. The display will indicate the number of zones open and invite viewing. Closing the zones will restart the exit

Summary of the content on the page No. 11

MICROMAX SETTING OPTIONS Setting with the MicroMAX Cards The MicroMAX user cards can be used to set the system. This is done by assigning a MAX user card (or fob) with one of the setting options. When the MAX card is held against a MAX module for three seconds, the MAX function is activated. For example, if the MAX function assigned is 13 = Part Set, then activating the card held function results in the system being part set. If a user is assigned group choice, then a keypad will have to be acce

Summary of the content on the page No. 12

UNSETTING THE SYSTEM Normal Entry Unsetting starts immediately when the FINAL door is opened or an ENTRY zone is activated. The sounder pulses slowly and the user must go directly to the keypad and enter a valid PIN, followed by A>,

Summary of the content on the page No. 13

MENU OPTIONS There are two menu structures on the Galaxy control panels: Full Menu Only accessed by default by the Manager code on the Galaxy 60, 128, 500, 504 and 512 control panels. Quick Menu A selection of options from the full menu. The quick menu is the default menu access for all user codes (level three and above) as well as the Manager code on the Galaxy 8 and 18 control panels. Full Menu User Level Quick Menu L4 evel 3L5 evel L6 evel Level 0 = Omit 3 1y 0 = Setting2t 0 = Displa3y 0 = Te

Summary of the content on the page No. 14

Accessing The Menu To access the menu enter a valid code and press the ent key. The Full Menu or Quick Menu is accessed, depending on the user level. Note: 1. If the user does not have group choice, all groups assigned to the user code must be unset. 2. If the user has group choice, at least one group on the system must be unset. 3. If there are no groups, then the system must be unset. Full Menu The Full Menu has a hierarchy of four structures contained within it. Each structure is ac

Summary of the content on the page No. 15

Omit Zones (User Level 3 And Above) Purpose This option allows the user to omit zones before setting the system. Zones must be eligible for omission otherwise they will not be displayed. " # Note: Zones remain omitted for one set period only. Selecting Omit Zones ! Enter the QUICK MENU. The 0=OMIT ZONES option is displayed. Press the ent key to select this option. $ Viewing Eligible Zones When the Omit Zones option is selected

Summary of the content on the page No. 16

Atm 1/2/3/4 Zones (512 Only) ATM zones are omitted by entering one of the ten ATM codes (user 188 to user 197). To select this option enter an ATM code followed by the ent key. Use the A> key to scroll through the four ATM zone options (ATM1 to ATM4) and select by pressing the ent key. A preprogrammed ATM delay time will expire before omitting all ATM zones with the selected ATM zone type. The zones will be omitted for the dura

Summary of the content on the page No. 17

Chime (User Level 3 and Above) Purpose The Chime mode is switched on and off by this option. When the Chime mode is on, any zones that have been programmed by the engineer for chime will activate momentarily when opened. Note: Your system may not require any zones of this type. Selecting Chime Enter the QUICK MENU. Press key 2 followed by the ent key. The display shows the ON/OFF status of the Chime mode. Press the >A key to

Summary of the content on the page No. 18

Status The current status of the zone is displayed as circuit information, e.g. Open or Closed. This information alternates with function information. Description The zone description, if programmed, is displayed on the bottom line of the display. The descriptor is assembled from alpha-numeric text and describes the zone in detail, e.g. West Office Door. Selecting And Viewing Selecting the Display Zones option displays the first zone address available on the system. O

Summary of the content on the page No. 19

Additional Information The # key can be used to reveal additional information on some types of events. This information is displayed on the bottom line. The information includes details such as zone descriptors, user levels and which keypad was used. * Printing If a serial printer is connected to the system, a system history can be printed by pressing the * key. The system will print from the event on display unt

Summary of the content on the page No. 20

Walk Test (User Level 5 and Above) Purpose The Walk Test option provides a method of testing the zones to ensure that they are operating correctly. There are two options available: 1. All zones can be tested 2. Selected zones can be tested In both cases the sounder indicates an open zone. The test is recorded in the log. Wire-free zones also show the received signal strength as a percentage Selecting Walk Test Enter the QUICK


Alternative user manuals
# User manual Category Download
1 Honeywell ADEMCO LYNXR Series User manual Home Security System 47
2 Honeywell ADEMCO LYNXR-EN User manual Home Security System 45
3 Honeywell ADEMCO VISTA VISTA-15PSIA User manual Home Security System 22
4 Honeywell ADEMCO VISTA VISTA-20P User manual Home Security System 533
5 Honeywell ADEMCO VISTA VISTA-15P User manual Home Security System 115
6 Honeywell EQUIPMENT MONITORING SYSTEM W8710A User manual Home Security System 3
7 Honeywell ADEMCO VISTA VISTA-20PSIA User manual Home Security System 14
8 Honeywell EKZ008200B User manual Home Security System 16
9 Honeywell GEH User manual Home Security System 1
10 Honeywell Galaxy 16 User manual Home Security System 30
11 Honeywell Galaxy 16 Plus User manual Home Security System 6
12 Honeywell GALAXY 16103 User manual Home Security System 4
13 Honeywell GES User manual Home Security System 1
14 Honeywell GEC User manual Home Security System 0
15 Honeywell HCD544 User manual Home Security System 1
16 3Com 1000BASE-T-GBIC User manual Home Security System 0
17 Sony BRCSDP12 User manual Home Security System 3
18 3Com TECHD-0000000122 User manual Home Security System 1
19 Sony SSC-M354 User manual Home Security System 3
20 Sony DIGITAL 8 DCR-TRV130E User manual Home Security System 9