Summary of the content on the page No. 1
2.4 GHz WIRELESS COLOR
SECURITY SYSTEM WITH
WEATHER RESISTANT* CAMERA
* IP44 rated for Indoor and Outdoor use. Not recommended for direct exposure to water, rain or snow.
Instruction Manual
English Version 1.0
Before operating the system, please read this manual
thoroughly and retain it for future reference.
MODEL: SG6352
www.lorexcctv.com
Copyright © 2005 Strategic Vista International Inc
This product broadcasts over public airwaves and its video and audio signals may be
intercepted without
Summary of the content on the page No. 2
CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of two Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage“ within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric
Summary of the content on the page No. 3
SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS All the safety and operating instructions should be read before the system is operated, and retained for future reference. 1. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 2. FOLLOW INSTRUCTIONS - All operating instructions should be followed. 3. WATER AND MOISTURE - Do not use this video product near water – for example, a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet
Summary of the content on the page No. 4
TABLE OF CONTENTS PAGE INTRODUCTION & FEATURES……………………………………… 1 SYSTEM INCLUDES………………………………………………….. 2 CONTROLS AND FUNCTIONS Wireless Camera….......…….......….……………………..……... 3 Wireless Receiver...……..............................……….……...…… 4 INSTALLATION OF WIRELESS CAMERA…………………………. 5 INSTALLATION OF WIRELESS RECEIVER Operation with TV (Using RCA Cables)......……………….….... 6 Operation with TV (Using Coaxial Cable) ..............…..……...... 7 SYSTEM OPERATION 8 Multiple Cameras / Auto Scan
Summary of the content on the page No. 5
INTRODUCTION: Thank you for purchasing the 2.4 GHz Wireless Color Camera & Receiver System. This system turns your TV into a Video Security System, providing instant protection in your home or office. Avoid the hassle of running wires. This system is easy to install and operate for immediate applications. The system is capable of connecting up to 4 cameras (additional cameras sold separately) with the option to automatically scan between locations. To learn more about this 2.4GHz Wireless
Summary of the content on the page No. 6
SYSTEM INCLUDES: 1 - 2.4 GHz Color Wireless Camera 1 - 2.4 GHz Wireless Receiver 1 - Wall Mounting 1 - Clip-on Stand Owner’s Manual Bracket Also includes: 2 – 9V DC Adapters 1 – RCA Audio/Video Cable 1 – Coaxial Cable 2
Summary of the content on the page No. 7
CONTROLS & FUNCTIONS WIRELESS CAMERA 7 1 Front/Side View 5 2 3 8 4 6 6 1. Microphone – Built-in condenser microphone provides listen-in audio capability from camera to monitor 2. Lens – B&W CMOS Image Sensor 3. 6 Infrared LED’s – Enhances the picture quality in low light conditions* 4. Channel Selector/Power Button – Selects channels 1-4. Holding this button for 3 seconds turns the power ON/OFF (by default the camera is ON). 5. Bracket – Plastic bracket connects to camera for mounting to wall
Summary of the content on the page No. 8
CONTROLS & FUNCTIONS WIRELESS RECEIVER TOP VIEW 3 REAR VIEW 4 56 7 8 2 1 9 10 BOTTOM VIEW 1. Auto/Manual Button – Used to activate/deactivate auto sequencing 2. Channel Selector Button – Used to manually switch channels from 1-4 3. LED Channel Indicators – Indicator light shows selected channel 4. 2.4 GHz Antenna – High gain dipole antenna receives audio and video signal from the wireless camera 5. Video Output Jack (Yellow) – RCA jack for video output connector (when using RCA connector) 6
Summary of the content on the page No. 9
INSTALLATION OF CAMERA OPTION #1 – Permanent Wall Mount STEP 1: Wall To 9V Power Camera mounted Adapter 1. Attach the stand base to the wall or ceiling where you want to install the camera. Locate a wall stud or ceiling, and secure the bracket using the three supplied screws. 2. Secure the camera to the bracket by sliding the camera socket over the stand, and fasten it in place with the supplied screw. 3. Connect the supplied 9V DC adapter to the DC IN jack at the rear of the camera, and plug
Summary of the content on the page No. 10
INSTALLATION OF RECEIVER CONNECTING THE RECEIVER TO A TV STEP 2: You have two options to connect the Receiver: A) Using RCA Cables (see below), or B) Coaxial Cables, please refer to page 7 of this manual. Television Back of Receiver A) Electrical Outlet Ensure the Power Switch on the Receiver is turned OFF before NOTE proceeding with the following steps. 1. Place the wireless receiver near your television (or monitor). 2. Connect one end of the RCA cables to the Audio/Video output jacks at t
Summary of the content on the page No. 11
INSTALLATION OF RECEIVER CONNECTING A RECEIVER TO A TV USING COAXIAL CABLES Television B) Back of Receiver Electrical Outlet Audio Video Coaxial Cable (75 ohm) NOTE Ensure the Power Switch on the receiver is turned OFF prior to proceeding with the following steps. 1. Place the wireless receiver near your television (or monitor). 2. Connect one end of the coaxial cable to the back of the receiver. Plug the other end of the coaxial cable to the television. 3. Connect one end of the supplied 9
Summary of the content on the page No. 12
SYSTEM OPERATION CONNECTING MORE CAMERAS TO YOUR SYSTEM (MAX. OF 4) The receiver will automatically do a self diagnostic when it is powered up to determine how many cameras are connected. It will detect which channels are receiving a video signal. To purchase additional wireless cameras, please visit www.lorexcctv.com When connecting additional cameras to this system, ensure the camera is set to a different channel. Use the Channel Selector button to navigate between channels. AUTO SCANNING
Summary of the content on the page No. 13
SYSTEM OPERATION AUTO AND MANUAL VIEWING OPTIONS This system is preset to the Manual mode. In Auto mode, the LED light will turn ON. To manually view a specific camera location, set the system to Manual and press the Ch. Select key to view the desired camera location. Auto Mode is used when more than 1 camera is connected to the system. Set the Auto/Manual button to Auto Mode in order to have the system automatically rotate between camera locations. SELECTABLE DWELL SETTING Dwell Setting is
Summary of the content on the page No. 14
TROUBLESHOOTING If the system does not function properly, check the following points before contacting the service center. Causes & Remedies Problems Camera Receiver/Transmitter No power - AC adapter not plugged in - AC adapter not plugged in (no picture/sound) - Power not turned ON (press - Power switch not turned on and hold the Channel button - TV or Monitor not turned on for 3 seconds) - Improper A/V or coaxial cable connection Poor Reception - AC adapter not plugged in - Adjust antenna di
Summary of the content on the page No. 15
TECHNICAL SPECIFICATIONS WIRELESS CAMERA Image sensor Color CMOS Lens 3.6mm Scanning system 2:1 interlace Scanning frequency 15.734 KHz(H) 59.94Hz (V) Sync. system Internal Negative synchronization Resolution 240 Lines 3 Lux @ F2.0 (without IR LED) Min. illuminations 1.0Vp-p/75 Ohm Video Output r=0.45 Gamma characteristics Electrical Auto Iris Auto Iris Shutter sensitivity :1/60-1/6,000 Electrronic Condenser Microphone 2.4 GHz-2.473 GHz (4Ch) Transmitting frequency FM Modulation 90dBu/V, 3m R
Summary of the content on the page No. 16
CARE AND MAINTENANCE: Please follow these instructions to ensure proper care and maintenance of this system Keep your monitor and camera dry. If it gets wet, wipe it dry immediately. Use and store your unit in normal temperature environment. Extreme temperatures can shorten the life of the electronic devices. Handle the monitor carefully. Dropping it can cause serious damage to the unit. Occasionally clean the unit with a damp cloth to keep it looking new. Do not use harsh chemicals, cleanin
Summary of the content on the page No. 17
It’s all on the web Product Information Specification Sheets User Manuals Software Upgrades Quick Start Guides Firmware Upgrades VISIT www.lorexcctv.com www.lorexcctv.com Strategic Vista International Inc.
