Summary of the content on the page No. 1
Rev. 110402
Summary of the content on the page No. 2
TABLE OF CONTENTS FCC RADIATION NORM:.................................................................................................................................................2 PACKAGE CONTENTS: ..................................................................................................................................................3 SYSTEM REQUIREMENTS: ..............................................................................................................................
Summary of the content on the page No. 3
User’s Manual 5.2.13 System........................................................................................................................................................38 5.2.13.1 Date/Time............................................................................................................................................................. 38 5.2.13.2 Password ......................................................................................................................
Summary of the content on the page No. 4
User’s Manual FCC RADIATION NORM: FCC This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part 15 of Federal Communications Commission (FCC) rules. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause
Summary of the content on the page No. 5
User’s Manual PACKAGE CONTENTS: Your new Security Camera and DVR Kit will ship with the following items. 4BL-45GB SYSTEM REQUIREMENTS: Please be sure the computer that you install the included software with complies with the following specifications: - IBM PCs or 100% Compatibles ® - Windows XP, Vista, 7 - Internet Explorer 7 or Newer Web Browser Software - CD-ROM Drive (for software installation) 3
Summary of the content on the page No. 6
User’s Manual SAFETY INSTRUCTION: 1. Use proper power source. Do not use this product with a power source that applies more than specified voltage (100-240V AC). 2. Never insert any metal into the DVR or any openings. Putting metal into the DVR case can cause danger of electric shock. 3. Do not operate in wet or dusty area. Avoid places like a damp basement or dusty hallway. 4. Do not expose this product to rain or use near water. If this product accidentally gets wet, unplug it and co
Summary of the content on the page No. 7
User’s Manual CHAPTER 1: DVR FEATURES Other Features • H.264 compression • Real time recording on 4 channels • USB Backup to flash drive • Triplex operation: view, record, playback simultaneously • Security Certified Hard Drive pre-installed • Easy control with USB mouse ® ® ® • Instant viewing using Windows Mobile™, Symbian S60 Version 3 & 5, iPhone , ® ® Blackberry OS 5, and Android • Internet Remote Functions*: View, Search & Playback, Backup and Setup • Email alerts with JPEG at
Summary of the content on the page No. 8
User’s Manual CHAPTER 2: LAYOUT 2.1 Front Panel (Please refer to actual product for detail) 4 5 3 1 2 6 7 8 9 10 11 13 12 Buttons / Item Marks Functions Indicators Channel Select: CH1 CH2 CH3 Select which single channel to display 1 CH4 Display all cameras in live display or 2 QUAD playback mode Move up Move Left / Rewind / or hold for 5 seconds to switch output between VGA and BNC Navigation 3 Buttons Select Button, press to enter pop up menu Move Righ
Summary of the content on the page No. 9
User’s Manual 2.2 Rear Panel (Please see actual product for detail) 6 7 8 9 5 4 3 1 2 Item Physical Connection method ports 1 Power Port Connect power supply - DC12V 3A 2 PTZ Pan Tilt Zoom Output to PTZ enabled camera 3 Ethernet Port Connect intranet, internet (RJ45 interface) 4 USB Mouse Connect Port to Mouse Port 5 VGA Connect to monitors with VGA input port 6 Video outputs Connect to monitor inputs ( BNC interface) 7 Video inputs Connect CH1-4 ( BNC interface) 8 Audio Ou
Summary of the content on the page No. 10
User’s Manual 2.3 Remote Control The remote control is the secondary input device for navigating the system’s interface. To use the remote control: 1-4 Channel Select 1-4 5-9 Digit Key 5-9 Digit Key 0, or press to switch between VGA 0 and BNC output ALL Display all Channels – Quad View Menu Enter / Exit Menu ▲ UP ▼ Down SEL Select Rewind Play Forward ● Record Pause / Play Frame by Frame ■ Stop Audio No function for this particular model Mute Enable or disable sound
Summary of the content on the page No. 11
User’s Manual 2.4 Mouse Operation You can use a mouse instead of the front panel buttons or remote control to navigate the operation of your DVR The mouse is the primary input device for navigating system menus. To use a mouse with the system: 1. Connect a USB mouse to the USB MOUSE port on back panel of the system. NOTE: Only the USB port on the front panel is designed for data backup to a USB flash drive. Do not connect a USB flash drive to the USB MOUSE port on the rear panel. 2. Use
Summary of the content on the page No. 12
User’s Manual Chapter 3: DVR/Camera installation 3.1 Connecting the DVR to a TV or Monitor Using the supplied BNC to RCA connector 1. Connect the BNC to RCA connector to the back of the DVR labeled Video Output (refer to Chapter 2.2, Rear Panel Picture) 2. Connect the other end of the cable to an open RCA VIDEO input on your TV or Monitor 3. Select the appropriate video input on your TV or Monitor to view the DVR NOTE: Your DVR must be powered on so you can view on your TV or Monitor.
Summary of the content on the page No. 13
User’s Manual CHAPTER 4: DVR START UP 4.1 System Initialization After connecting the power adapter and turning on the power, the system will boot-up and start initializing. 4.2 Main Interface After initialization, the main interface will load. When there are video inputs, the interface will display live images from the cameras. In the main interface, if you use the mouse to double-click the live image of any channel, the image will be maximized to full screen, by double-clicking agai
Summary of the content on the page No. 14
User’s Manual CHAPTER 5: DVR MENU AND OPTIONS Mouse Only When using the mouse, use the Sub-Menu to access several system options, including the Main Menu. To open the Sub-Menu, Right-click anywhere onscreen to open Sub-Menu. MAIN MENU: Opens the main system menu Lock: Password protect access to menu and options PTZ: Opens the PTZ control menu PIP: Choose between showing one or two small pictures within the main display picture. Search: Open the Search Menu to view recorded video Mute
Summary of the content on the page No. 15
User’s Manual 5.1 Main Menu Preview Record Record Motion Functions Alarm Setup Playback Internet / LAN Mobile Network E-mail Setup MAIN MENU Camera Settings Camera PTZ Date/Time Password System Hard Drive Language A/V Setup Advanced Maintain Info 13
Summary of the content on the page No. 16
User’s Manual 5.2 Main Menu Right-click the mouse, a pop-up menu will be displayed on the screen. Click “MAIN MENU” button on the pop-up menu to enter into Main Menu. You can also use the Menu button on the front panel to open the Main Menu. When using the front panel buttons, use the FWD and REW button to move in the menu, and use the SEL button to select the icon. Use the ESC button to return to previous window. In Main Menu, you can change settings such as Record Settings, Playba
Summary of the content on the page No. 17
User’s Manual 5.2.1.2 Motion To configure the Motion Detection function of the DVR, click “MAIN” “Recording Functions” “Motion” to enter the Motion Detect Setup window. Channel: Choose the channel you would like to configure to have specific motion detection function. Motion Detection: Enable or Disable Motion Detection of the selected channel. Sensitivity: Choose the level of sensitivity of motion detection. 1 is the least sensitive. Detection Area: Click this button of th
Summary of the content on the page No. 18
User’s Manual 5.2.2 Playback To play a recorded video, select “Main Menu” “Playback” Functions to open the RECORD SEARCH menu. To search for a file, enter specific date and click “SEARCH”, you will find all the recordings of that day. You can play video Forward at 2x, 4x, 8x and 16x speeds, Slow play at 1/2x, 1/4x, 1/8x, 1/16x or normal play, pause and play frame by frame using the playback control bar, and adjust volume by clicking or sliding tune control bar. When playback is
Summary of the content on the page No. 19
User’s Manual 5. Click BACKUP from the side-panel to immediately begin copying the files to the USB flash drive. NOTE: Backup progress appears in the status window. DO NOT remove the USB flash drive during backup. 6. The system will create a folder on the USB flash drive named RecordFile. The files are saved as .264 files. If backup is successful, click CLOSE in the confirmation window and then remove the USB flash drive. NOTE: If there is not enough space on the USB flash drive, th
Summary of the content on the page No. 20
User’s Manual 5.2.3 Network Setup – Intranet (Internal Access) To access the NETWORK SETUP menu, select Main Menu NETWORK to open the NETWORK SETUP menu. If your DVR is connected to a router of your local network (intranet), then you can setup the NETWORK Setup section of the DVR to view the image your DVR is recording remotely using computers connected within your network. Important Note: You will not be able to access your DVR if your DVR is connected behind two or more routers. N
