Summary of the content on the page No. 1
Disk On-line Server
QNAP Systems, Inc.
NAS-2100
User Manual
Summary of the content on the page No. 2
Broadband Network Attached Storage NAS-2100 User Manual (Version: 4.1.4) ©Copyright 2005. QNAP Systems, Inc. All Rights Reserved. March 29, 2005 2
Summary of the content on the page No. 3
CUSTOMER SERVICE For the contact details of customer service and technical support, please refer to the registration card. LIMITED WARRANTY In no event shall the liability of QNAP Systems, Inc. (QNAP) exceed the price paid for the product from direct, indirect, special, incidental, or consequential software, or its documentation. QNAP offers no refunds for its products. QNAP makes no warranty or representation, expressed, implied, or statutory, with respect to its products or t
Summary of the content on the page No. 4
Table of Contents Chapter 1 Overview of Disk On-line Server ...........................................6 1.1 Introduction ...................................................................................6 1.2 Package Contents............................................................................6 1.3 System Overview ............................................................................7 Chapter 2 Installation of Disk On-line Server........................................8 2.
Summary of the content on the page No. 5
5.1 Restart/ Shut down Server .............................................................72 5.2 Reset Administrator Password and Network Settings ..........................72 5.3 Disk Failure or Malfunction..............................................................73 5.4 Power Outage or Abnormal Shutdown ..............................................73 Appendix A LCD Panel.........................................................................74 Appendix B Web File Manager ...........
Summary of the content on the page No. 6
Chapter 1 Overview of Disk On-line Server 1.1 Introduction Thank you for choosing Disk On-line Server (NAS). This product has the following key features: • Desktop/ Rack-mount dual form factor design • VIA Eden 400MHz/ 128MB DRAM • 2 x 3.5’’ IDE HDD • Maximum capacity up to 600GB • Supports RAID 0, 1 and JBOD storage management • 10/100 Mbps fast Ethernet port • Supports UPS management via USB port 1.2 Package Contents Your NAS package contains: • Disk On-line Server (st
Summary of the content on the page No. 7
1.3 System Overview Front View LCD panel Enter button Down button LED Indicators: Disk 1, Disk 2, and Network Rear View 10/100 Mbps RJ-45 Ethernet port Reset button Power Connector Power button USB ports 7
Summary of the content on the page No. 8
Chapter 2 Installation of Disk On-line Server 2.1 Network Configuration By factory default, Disk On-line Server will search the network via DHCP (Dynamic Host Configuration Protocol) to detect IP address settings automatically. If your network does not support DHCP protocol, Disk On-line Server will use the default settings as below: IP Address: 192.168.0.1 Subnet Mask: 255.255.255.0 When Disk On-line Server completes its boot-up process, the LCD panel will display current IP a
Summary of the content on the page No. 9
Chapter 3 Administration of Disk On-line Server When you have installed Disk On-line Server and connected it to the network, you can manage the server via web browser. Disk On-line Server supports Microsoft Internet Explorer 5.0 or later, and Netscape Navigator 4.5 or later. Microsoft Internet Explorer 5.5 is recommended. 3.1 Accessing Administration Page 1. Launch the web browser. Enter the IP address of Disk On-line Server to access the administration page. The IP address ca
Summary of the content on the page No. 10
3. Click Administration on the main page. 4. Enter the user name and password. The default administrator name and password are: User name: administrator Password: admin The first time you login Disk On-line Server, Quick Configuration page will be shown. Please refer to the Quick Configuration section for more details. 10
Summary of the content on the page No. 11
3.2 Server Administration There are eight main sections in server administration, which are listed below: Quick Configuration Server Name Date & Time System Settings Language Setting View System Settings TCP/IP Configuration Microsoft Networking Network Apple Networking Settings NFS Service Netware Service Web Service FTP Service View Network Settings Create Disk Volume Delete Disk Volume Disk Configuration Examine Disk Volume Format Disk Volume View Disk & Volume Status Create Create M
Summary of the content on the page No. 12
3.3 Quick Configuration You can configure Disk On-line Server step by step in Quick Configuration section. 1. Enter the server name. 12
Summary of the content on the page No. 13
2. Change the administrator password or select to use the original password. 3. Enter the date, time and select the time zone for the server. 4. Select the language the server uses for file names. 13
Summary of the content on the page No. 14
5. Enter the IP address, subnet mask and default gateway for the server. 6. Select the network file services to provide on the server. 14
Summary of the content on the page No. 15
7. Configure disk volume on this server. 8. Configure the method of user authentication. 15
Summary of the content on the page No. 16
9. Manage users and user groups of this server. 16
Summary of the content on the page No. 17
10. Manage network shares on this server. 11. Finish. It may take several to tens of minutes to complete Quick Configuration, depending on your system settings. 17
Summary of the content on the page No. 18
3.4 System Settings Basic system settings include the server name, date, time, language settings, and view system settings. • Server Name Enter the name of Disk On-line Server. The server name can be 14 characters long at maximum, which can contain alphabets, numbers and hyphens (-). The server does not accept names containing empty characters, period (.), or names with only numbers. 18
Summary of the content on the page No. 19
• Date & Time Set the date, time, and time zone according to your location. If the settings are incorrect, the following problems may occur: When using a web browser to access or save a file, the display time of the action will be incorrect. The system event log time will be incorrect compared to the actual time when an action occurs. NTP Server You can enable or use specified NTP server to update the date and time of the system automatically. When there is no specified IP ad
Summary of the content on the page No. 20
• Language Setting Disk On-line Server will use the language specified in this section to create and display files and directories. Select the correct language to avoid the following problems: i. Unable to create files or directories in special characters. ii. Unable to display file or directory name in special characters. • View System Settings You can view all current system settings, e.g. server name, on this page. 20
