American Standard 7502.00 user manual

Summary of the content on the page No. 1

™
STAINLESS STEEL SINKS
Installation
Instructions
UNDERCOUNTER MOUNTING FOR CULINAIRE™
COLLECTION STAINLESS STEEL
KITCHEN SINKS
MODELS 7501.000, 7502.000, 7504.000, 7507.000
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years. Certified to comply with ANSI A112.19.3.M
CAN/C.S.A. B-45
Observe local plumbing and building codes.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
790766-100
BEFORE

Summary of the content on the page No. 2

IMPORTANT: DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY A.N.S.I. AND C.S.A. STANDARDS. SUPPORT CLIP LOCATIONS: MODEL 7502.000 MODEL 7507.000 SUPPORT CLIPS MODEL 7504.000 MODEL 7501.000 2 790766-100

Summary of the content on the page No. 3

1 4 Countertop Countertop Template Mount the faucet and Drill a clearance hole drain assembly following inside the cutout line. the manufacturer's instructions. Cutout template 2 5 Connect supply lines to faucet finger tight, and carefully bend to engage Cut opening on cut line with the supply stops. of the template. Countertop Tighten connections to Note - Contact your Template faucet for secure seal. countertop distributor for the best method of cut- ting materials such as marble, hard

Summary of the content on the page No. 4

Maintenance for stainless steel sinks: To keep the original quality of your Stainless Steel Sink, we recommend regular cleaning. Use a mild liquid dish detergent and water to clean the product after use. Rinse carefully and dry. Please have the following in mind: • Do not let water or other liquids dry on the product. Liquids that are left to dry leave a grey build-up stain on the steel. • Stainless steel can stand hard treatment, but sharp objects can easily scratch the surface. These scratc