American Standard Hampton 4751.732 user manual

Summary of the content on the page No. 1

Installation
Instructions
4751.702
4751.712
KITCHEN FAUCETS
4751.722
with EverClean™ Finish
4751.732
Congratulations on purchasing your American Standard faucet with
EverClean finish found only on American Standard faucets.
EverClean Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful for the life of the faucet
Certified to comply with ASME A112.18.1M
• EverClean™ available on: Polished Chrome, Satin N

Summary of the content on the page No. 2

INSTALL HANDLES CROSS HANDLE Push ADAPTER (2) into HANDLE BASE (3) in a way that the male square on the ADAPTER (2) fits in the female 8 point star of the HANDLE (4). Turn HANDLE STEM (1) to the off position. Push HANDLE BASE (3), ADAPTER (2) and HANDLE (4) onto VALVE STEM (1). Tighten HANDLE SCREW (5). Push INDEX CAP (6) in top of HANDLE (4). LEVER HANDLE Push ADAPTER (2) into LEVER HANDLE BASE (7) in a way that the male square on the ADAPTER (2) fits in the female star of the HANDLE BASE (7). T

Summary of the content on the page No. 3

FITTING WITH SPRAY Place SPRAY HOLDER (1) into separate hole of SINK (2) and assemble NUT (3) onto shank from underside of SINK (2). 1 Hand tighten NUT (3). 2 3 FITTING WITH SPRAY Feed SPRAY HOSE (1) through SPRAY HOLDER (2) and attach COUPLING NUT (3) of HOSE (1) to HOSE ADAPTOR (4) on valve body. Tighten COUPLING NUT (3) firmly. 1 2 4 3 TEST INSTALLED FAUCET Remove AERATOR. With handles in OFF position, turn on water supplies and check all connections for leaks. Operate both HANDLES to flush