Hans Grohe Axor 39020XX1 user manual

Summary of the content on the page No. 1

Installation Instructions / Warranty
Axor Citterio
39020XX1

Summary of the content on the page No. 2

Axor Citterio Tall Lav Mixer 39020XX1 Technical Data Recommended hole size 1 3/8“ Maximum depth of mounting surface 1 1/2“ Flow rate @ 45 psi 2.2 gpm Maximum water pressure 145 psi Recommended water pressure: 14.5 - 75 psi o o Recommended hot water temp.: 120 F - 140 F* The supply hoses require supply stops with 3/8“ compression fittings (not included). For best results, Hansgrohe recommends that this faucet be installed by a licensed professional plumber. *Please know and follo

Summary of the content on the page No. 3

Install the faucet: Place the faucet and sealing ring on top of the mounting surface. From beneath the mounting surface, install the friction washer, metal washer, and mounting nut. Tighten the tensioning screws. sealing ring friction washer metal washer mounting nut tensioning screws Connect the hoses to the stops, using 3/8” compression fittings (not included). Use two wrenches, as shown, to prevent the hoses from twisting. Install the pull rod. Install the drain. Turn on the water

Summary of the content on the page No. 4

Install the pop-up drain Remove the plunger assembly. Unscrew the drain outlet flange from the tee. plunger Unscrew the tailpiece from the tee. Wrap height adjuster the threads with two layers of Teflon tape and replace. flange Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. From under the sink, install the black mack gas- ket, white friction ring and retainer nut to the sealing gasket flange. Do not tighten the nut against the bottom of the sink

Summary of the content on the page No. 5

User instructions Push the handle to the rear to turn the water on, and pull it forward to turn the water off. Push the handle to the left to make the water warmer, to the right to make it cooler. Replacement Parts 1 1 handle 39091X XX XX X 2 2 face plate 97466X XX XX X 3 nut 97157000 3 4 cartridge cpl. 96783000 5 aerator cpl. 13085XXX 6 fixing set 13961000 4 7 pull rod 96923XXX 8 connection hose 96316001 XXX = finish 000 chrome 820 brushed nickel 5 7 8 6 5

Summary of the content on the page No. 6

Cleaning Recommendation for Hansgrohe Products Modern sanitary faucetry and shower fixtures consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain points when cleaning: Cleaning materials for faucets and shower products: Acids are necessary ingredients of cleaning materials for removing lime. However, please pay attention to the following points when cleaning faucets a

Summary of the content on the page No. 7

including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, ne

Summary of the content on the page No. 8

Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel. 770 360-9880 • Fax 770 360 9887 www.hansgrohe-USA.com US - Installation Instructions • Part No. 90581901 • Revised 06/2007