Premier Mounts GearBox Equipment Enclosure GB-PLEN1 user manual

Summary of the content on the page No. 1

INSTALLATION INSTRUCTIONS
GB-PLEN1
Equipment Enclosure for Plenum Ceilings
AUSTRALIA, NEW ZEALAND, OCEANIA
EUROPE
NORTH AMERICA (DISTRIBUTOR)
3130 East Miraloma Avenue
Swallow House,
P.O. Box 295
Anaheim, CA 92806 USA
Shilton Industrial Estate,
Mordialloc Victoria 3195
USA and Canada –
Shilton, Coventry, England CV79JY
Australia
Phone: 800-368-9700
Phone: +44 (0) 2476 614700
Phone: 039586 6330
Fax: 800-832-4888
Fax: +44 (0) 2476 614710
www.premiermounts.com.au
Other Locations – Phone: (001)-71

Summary of the content on the page No. 2

GB-PLEN1 Table of Contents Warning Statements 2 Parts List 3 Installation Tools 3 GB-PLEN1 Installation with PP-FCTA 4 GB-PLEN1 Installation with PP-FCMA 7 Technical Specifications 9 Warranty 10 Warning Statements PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLAT

Summary of the content on the page No. 3

GB-PLEN1 Parts List This accessory is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700). Mounting Rails (Qty 2) GB-PLEN1 (Qty 1) Cover Lid (Qty 1) M5 x 10mm Phillips Padlock Hasp (Qty 1) Head Screw (Qty 10) Installation Tools Phillips Screwdriver Installation Instructions

Summary of the content on the page No. 4

GB-PLEN1 The GB-PLEN1 is designed for use with either the PP-FCTA or PP-FCMA. After installing your selected false-ceiling adapter, follow the instructions on the following pages to secure the GB-PLEN1. GB-PLEN1 Installation with PP-FCTA Mounting Rails PP-FCTA Plate Upper Adapter Plate Wing Nut Upper Adapter Plate PP-FCTA Step 1. Loosen the wing nuts (do not remove) on Step 2. Slide the mounting rails the upper adapter plate. (threaded holes facing up) between the upper adapter plate an

Summary of the content on the page No. 5

GB-PLEN1 You may wish to pre-install your electronic components inside the enclosure at this time. If so, make sure to leave the mounting slots accessible. Mounting Points M5 x 10mm Screws Step 5. Locate the four (4) mounting holes on the mounting rails. Step 6. Align the mounting slots on the GB-PLEN1 with the mounting holes on the mounting rails. Step 7. Use four (4) M5 x 10mm screws to attach the GB-PLEN1 to the mounting rails. Mounting Rails Installation Instructions P

Summary of the content on the page No. 6

GB-PLEN1 If you did not pre-install electrical components, Padlock Hasp then you may now install all power and signal (optional) equipment. A qualified electrician should make any power connections to the GB-PLEN1. M5 x 10mm Screws Step 8. Place the padlock hasp on the inside of the GB-PLEN1 (optional). Completed Attachment When attaching the padlock hasp, make sure the flat side is resting against the inside wall of the GB-PLEN1. Step 9. Use two (2) M5 x 10mm Phillips screws to attach

Summary of the content on the page No. 7

GB-PLEN1 The GB-PLEN1 is designed for use with either the PP-FCMA or PP-FCTA. After installing your selected false-ceiling adapter, follow the instructions on the following pages to secure the GB-PLEN1. GB-PLEN1 Installation with PP-FCMA Mounting Rails Adapter Plate Mounting Screw Screwdriver PP-FCMA M5 x 10mm Screws Step 1. Loosen the four (4) mounting screws that are located on the underside of the PP-FCMA. Do not completely remove these screws. Step 2. Slide the mounting rails (threade

Summary of the content on the page No. 8

GB-PLEN1 Padlock Hasp If you did not pre-install electrical components, (optional) then you may now install all power and signal equipment. A qualified electrician should make any power connections to the GB-PLEN1. M5 x 10mm Screws Step 6. Place the padlock hasp on the inside of the Completed Attachment GB-PLEN1 (optional). When attaching the padlock hasp, make sure the flat side is resting against the inside wall of the GB-PLEN1. Step 7. Use two (2) M5 x 10mm Phillips screws to attach

Summary of the content on the page No. 9

GB-PLEN1 Technical Specifications All measurements are in inches(mm). Installation Instructions Page 9

Summary of the content on the page No. 10

GB-PLEN1 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective