Walker Edison Regal A/V Stand V35MWF user manual

Summary of the content on the page No. 1

Item #: V35MWF
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 07/2011

Summary of the content on the page No. 2

Summary of the content on the page No. 3

Summary of the content on the page No. 4

Attach crossbars (4,6) to front panel (2) using screws (A). Attach crossbars (3,5) to front panel (1) using screws (A). Tighten screws (A) with wrench (H). Attach crossbars (3,4) to cable management system (8) using screws (A). Attach crossbars (5,6) to cable management system (8) using both screws (A) and screws (B). It may be necessary to loosen the screws from Step 1 slightly to align the crossbars properly with the cable management system. Tighten all screws firmly with wrench (H).

Summary of the content on the page No. 5

Attach support bars (7) to crossbars (3,4) and crossbars (5,6) using screws (C). Tighten screws (C) with wrench (H). Screw suction cups (D) into crossbars (5,6). Screw pins (E) into cable management system (8). Insert rubber pads (F) into front panels (1,2). Insert suction cups (G) into cable management system (8).

Summary of the content on the page No. 6

Screw pins (E) into front panels (1,2). Carefully slide glass shelves (10) into place. The glass shelves will rest on the pins placed in Steps 4 and 5.

Summary of the content on the page No. 7

Place glass shelf (9) carefully on top of the stand and gently press down to secure.