American Standard Ceramix 2021.6XX user manual

Summary of the content on the page No. 1

0





1





2




3




4





5





6




Installation
Instructions
TM
2021.6XX
KITCHEN FAUCETS
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
Certified to comply with ASME A112.18.1M
M66240 REV.1.1
TOOLS REQUIRED
Channel Locks
Adjustable Wrench
Plumbers' Putty or Caulking Phillips Screwdriver
Turn

Summary of the content on the page No. 2

0 1 2 3 4 5 6 WATER SUPPLY CONNECTIONS 3 Bend 3/8” SUPPLY TUBES to meet water supplies valves. Use palm of hand to support TUBES while bending to avoid kinking. Connect inlet TUBES to water supplies with appropriate connectors. Connect left TUBE to HOT water supply, and the right TUBE to the COLD water supply. Note: If additional supply length is required, installer must purchase additional parts separately. COMPRESSION NUT 3/

Summary of the content on the page No. 3

0 1 2 3 4 5 6 TEST INSTALLED FITTING 6 With HANDLE (1) in OFF position, turn on 1 WATER SUPPLIES (2) and check all connections for leaks. Remove AERATOR (3). Operate HANDLE (2) up and down, in COLD and HOT positions, to flush water lines thoroughly. 3 Direct SPRAY HEAD (3) into sink. Open faucet and activate spray. Check SPRAY HOSE (4) connections for leaks. Replace AERATOR (3). 2 ADJUST HOT LIMIT STOP 7 By restricting handle