Telex BTR-24/TR-24 user manual

Summary of the content on the page No. 1

BTR-24/TR-24
Wireless Intercom LIT000068TX Rev. A
Bosch Communications Systems
U S E R I N S T R U C T I O N S
2. The beltpacks may be powered with their internal battery (if
NOTE: Prior to use, the TR-24 Beltpacks and BTR-24 Base
already charged) or external AC. If external AC is desired,
Station need to have their battery packs fully charged. Refer to
use the charging power supplies that come with the beltpacks
battery charge instructions.
for this purpose.
3. Connect the beltpack to

Summary of the content on the page No. 2

TR-24 Control and Connection – Top Panel TR-24 Control and Connection – Bottom Panel 1 2 3 4 5 6 7 8 9 CHG OFF 1 MIC S.T. 2 ADJ ADJ EXT 1. Volume Control and Power Switch – Turns the power on/off and controls 7. Charge Light. headset volume. • RED = Beltpack battery is charging. 2. Battery / Power Light – Indicates the beltpack has power, either from the internal • GREEN = Beltpack battery is charged. battery or AC power connected to the unit. 8. Headset Connector – Standard 4-pin XLR c