Cornelius 230 VAC user manual

Summary of the content on the page No. 1

IMI CORNELIUS INC  One Cornelius Place  Anoka, MN 55303-6234
Telephone (800) 238-3600 Facsimile (612) 422-3246
INSTALLATION INSTRUCTIONS
VOLTAGE PROTECTOR MODULE KIT (P/N 440000401)
ON
230 VAC, 50Hz VANTAGE POST-MIX DISPENSERS
Read and understand these instructions thoroughly before installing this Voltage Protector Module Kit. Purpose
of the Voltage Protector Module is to shut the Dispenser down should a too low or a too high power voltage con-
ditio

Summary of the content on the page No. 2

Summary of the content on the page No. 3

PRIMARY AGITATOR MOTOR TERMINALS VOLTAGE PROTECTOR (HIGH VOLTAGE) MODULE TRANSFORMER ELECTRICAL SECONDARY CONTROL BOX TERMINALS (24 VAC) FIGURE 1. TRANSFORMER/VOLTAGE PROTECTOR MODULE LOCATION 5. Place the transformer and the VOLTAGE PROTECTOR MODULE (item 1) on the refrigeration deck in approximate locations as shown in Figure 1. 6. Using the transformer and the VOLTAGE PROTECTOR MODULE (item 1) as templates, mark their mount- ing holes locations on the refrigeration deck. 7. Using a 9/64 drill

Summary of the content on the page No. 4

3 569000242 ITEM 1 ITEM 3 GREEN INDICATOR LIGHT PIGGY BACK TERMINAL CONNECTION ITEM 4 YELLOW CONNECTOR INDICATOR ITEM 2 LIGHT FIGURE 2. WIRING DIAGRAM