Our goal is to provide you with a quick access to the content of the user manual for Atari Marine Instruments LC-1. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Atari Marine Instruments LC-1.
If looking through the Atari Marine Instruments LC-1 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Atari Marine Instruments LC-1 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Atari Marine Instruments LC-1. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
G3 Air/Fuel Gauge
LM-1 Quick Start Guide
G3 Air/Fuel Gauge
LC-1 Quick Start Guide
The LM-1’s analog output cable has three ends: Red wire
is analog output 1, White wire is analog output 2, and the
remaining wire is the ground. In these instructions we
1. Wire the LC-1 per the unit’s instructions
will be using the white and ground wires.
2. Connect the gauge’s BROWN wire to a permanent/constant
12 volt source.
1. Connect the gauge’s BROWN wire to a permanent/constant 12 v
|1||Atari Marine Instruments LM-1||Marine Instruments||24|
|2||Sony Marine Instruments SSM-930||Marine Instruments||14|
|3||Sony Marine Instruments SSM-175A||Marine Instruments||13|
|4||Atari Marine Instruments LM-1||Marine Instruments||19|
|5||ATD Tools Marine Instruments atd-5608||Marine Instruments||35|
|6||Attwood 8M004689||Marine Instruments||35|