Bogen CommunicationsMIC1S user manual

Summary of the content on the page No. 1

Block Diagram
MIC1S
Microphone Input
Module
Features
• Transformer-balanced
• Phantom power
• Screw terminal connections
• Gain/Trim control
• Bass and treble contols
• Audio gating
• Gating threshold and duration adjustments
• Variable threshold limiter
• Limiter activity LED
• 4 levels of available priority
• Can be muted from higher priority modules
• Can mute lower priority modules
50 Spring Street, Ramsey, NJ 07446, U.S.A.
201-934-8500; Fax: 201-934-9832
© 2002 Bogen Communications, Inc.

Summary of the content on the page No. 2

Module Installation Jumper Selections * 1. Turn off all power to the unit. Priority Level 2. Make all necessary jumper selections. This module can respond to 4 different levels of priority. Priority 1 is the highest priority. It mutes modules with 3. Position module in front of desired module bay lower priorities and is never muted. Priority 2 can be muted opening, making sure that the module is right- by Priority 1 modules and mutes modules set for 3 or 4. side up. Priority 3 is muted by either

Summary of the content on the page No. 3

Block Diagram MIC1S Microphone Input Module Features • Transformer-balanced • Phantom power • Screw terminal connections • Gain/Trim control • Bass and treble contols • Audio gating • Gating threshold and duration adjustments • Variable threshold limiter • Limiter activity LED • 4 levels of available priority • Can be muted from higher priority modules • Can mute lower priority modules 50 Spring Street, Ramsey, NJ 07446, U.S.A. 201-934-8500; Fax: 201-934-9832 © 2002 Bogen Communications, Inc.