Summary of the content on the page No. 1
JLBIOS608
Built-in oven
User information
Summary of the content on the page No. 2
Important safety information 1 It is most important that this instruction manual should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always en- sure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read th
Summary of the content on the page No. 3
How to avoid damage to the appliance � Do not line the oven with aluminium foil and do not place baking trays, pots, etc. on the oven floor, as the heat that builds up will damage the oven enamel. � Fruit juices dripping from the baking tray will leave permanent stains. For very moist cakes, use a deep tray. � Do not put any strain on the oven door when open. � Never pour water directly into the oven when it is hot. This could cause damage to or discolouration of the enamel. � Rough han
Summary of the content on the page No. 4
Disposal 2 Packaging material The packaging materials are environ- mentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materi- als in the appropriate container at the community waste disposal facilities. 2 Old appliance The symbol W on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appro- priate collection point f
Summary of the content on the page No. 5
Contents Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . 38 For the User Defrosting table. . . . . . . . . . . . . . . . . . . 38 Important safety information. . . . . . . 2 Drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Keep warm . . . . . . . . . . . . . . . . . . . . . . . . . 39 Making preserves. . . . . . . . . . . . . . . . . . . . . 40 Description of the appliance. . . . . . . . 6 General ov
Summary of the content on the page No. 6
Description of the appliance General overview Control panel Door handle Full glass door Control panel Oven display Oven function buttons 6
Summary of the content on the page No. 7
Oven features All interior oven walls, except the floor of the oven, are coated with a special enamel (catalytic coating). Top heat and heating elements Oven lighting Shelf positions Fan heating element Fan Bottom Heat Oven shelf runners, removable Oven accessories Grill set Oven shelf Grill Roasting pan shelf for roasting and grilling. For dishes, cake tins and items for roasting and Roasting pan grilling. For baking and roasting or for collecting fat. 7
Summary of the content on the page No. 8
Before using for the first time After approx. 5 seconds, the clock stops flash- Setting the time ing and the clock displays the time of day set. 3 The oven only operates when the time has been set. When the appliance is connected to the elec- trical supply or when there has been a power cut, Time flashes automatically. The appliance is now ready to use. Initial cleaning Before using the oven for the first time, you must clean it. Using the or button, set the current 1 Important: Do not use
Summary of the content on the page No. 9
Using the oven The electronic oven control Temperature/Clock Oven Functions Clock functions/Operating time Heat indicator On/Off Clock Functions Oven function selection Selection buttons 3 General instructions � Always switch the appliance on first by pressing the On/Off button. � When the selected function light illuminates, the oven begins to heat up or the time set begins to count down. � The Operating time display shows how long the oven has been operating. This display can only be se
Summary of the content on the page No. 10
Selecting an oven function Checking the temperature 1. Switch on the appliance using the On/ Off button. 2. Press the or button repeatedly until the desired oven function appears. Press the and buttons at the same time. The current oven temperature appears in the temperature display. 3 The temperature check does not work � A suggested temperature appears in the with oven functions with suggested temperature display. temperatures that cannot be adjusted, � If the suggested temperature i
Summary of the content on the page No. 11
Residual heat indicator Switching the oven off Switch off the appliance using the On/Off When the oven has been switched off, button. the bars that are still lit indicate the re- sidual heat remaining in the oven. 3 Cooling fan The fan switches on automatically in or- der to keep the appliance’s surfaces cool. When the oven is switched off, the fan continues to run to cool the ap- pliance down, then switches itself off automatically. 3 Heat indicator Warming up indicator When the oven fu
Summary of the content on the page No. 12
Fast heat up After an oven function is selected, the Fast heat up function can be used to pre- heat the empty oven in a relatively short time. 1 Important: Do not put the food to be cooked into the oven, until Fast heat up is completed and the oven is op- erating using the desired function. 1. Set the desired oven function (e. g. Conventional ). If necessary, change the suggested temperature. 2. Press the Fast heat up button. The bars flashing one after another show that Fast heat up is op
Summary of the content on the page No. 13
Oven functions The oven has the following functions: Oven function Application Convection with ring For baking on up to three oven levels at the same time. heating element Set the oven temperatures 20-40 °C lower than when using Conven- tional. Pizza setting For baking on one oven level dishes that require more intensive browning and a crispy base. Set the oven temperatures 20-40 °C lower than when using Conven- tional. Low temperature For preparing especially tender, succulent roasts. cooking
Summary of the content on the page No. 14
Inserting the oven shelf and roasting pan Inserting the roasting pan: Inserting the oven shelf and roasting pan together: Insert the roasting pan on the telescopic run- ners of the desired oven level so that the two Lay the oven shelf on the roasting pan. holes engage on the front retaining pins on the Insert the oven shelf and the roasting pan on telescopic runners. the telescopic runners of the selected oven Inserting the oven shelf: level so that the two holes of the roasting pan en
Summary of the content on the page No. 15
Inserting the grill tray on top: Grill set The grill set consists of grill and roasting pan. The grill can used on both sides. 1 Warning: There is a risk of burning when removing the roasting pan from the hot oven! Inserting the grill tray underneath: The grill tray rests on the roasting pan. Push the roasting pan between the guide bars of the selected oven level. 3 For grilling flat food items in large quan- tities and for toasting. The grill tray rests in the roasting pan. Push the roast
Summary of the content on the page No. 16
Clock functions Clock Functions Time display Clock Cook time/End time/Operating time Selection buttons Clock Functions Minute timer To set a countdown. A signal sounds after the time has elapsed. This function does not affect the functioning of the oven. Cooking duration To set how long the oven is to be in use. End of cooking To set when the oven is to switch off again. Time To set, change or check the time (See also section “Before Using for the First Time”). 16
Summary of the content on the page No. 17
3 How to use the clock functions � After a clock function has been selected, the corresponding function light flashes for about 5 seconds. During this period, the de- sired times can be set or modified using the or button. � When the desired time has been set, the corresponding function light continues to flash for approx. 5 seconds, then remains il- luminated. The set time begins to run. � With Countdown the oven must also be switched on in order to set the clock func- tion. � By pressing
Summary of the content on the page No. 18
Minute timer When 90% of the time set has elapsed, a signal sounds. 1. Press the Time functions button repeatedly When the time has elapsed, a signal sounds for until Minute timer flashes. 1 minute. 2. Using the or button, set the desired “00.00” and Minute timer flash. countdown. To stop the flashing and the audible signal: Press any button. After about 5 seconds, the display shows the time remaining. Minute timer lights up 18
Summary of the content on the page No. 19
Cooking duration When the time has elapsed, “00.00” and Cooking duration flash. 1. Select oven function and temperature. A signal sounds for 2 minutes. 2. Press the Time functions button repeatedly The oven switches itself off. until Cooking duration flashes. 3. Using the or button, set the desired To stop the flashing and the audible signal: cooking time. Press any button. Cooking duration lights up 19
Summary of the content on the page No. 20
End of cooking When the time has elapsed, “00.00” and End of cooking flash. 1. Select oven function and temperature. A signal sounds for 2 minutes. 2. Press the Time functions button repeatedly The oven switches itself off. until End of cooking flashes. 3. Using the or button, set the desired To stop the flashing and the audible signal: switch-off time. Press any button. End of cooking lights up and the switch-off time is displayed. 20
