Summary of the content on the page No. 1
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page c1
CavVelocity
CavVelocity DSL Modem with
Inline Phone Filter
Installation Instructions
Summary of the content on the page No. 2
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page c2 About Your DSL Service You have just received the Cavalier Telephone DSL Self Installation Kit. After you connect your computer to the DSL modem and install the necessary Ethernet compo- nents in your computer, your DSL service will enable you to be connected to the Internet at all times and place calls on the same line. Required Equipment for Your DSL Connection DSL Modem (provided) Cabling (provided) Ethernet Card (customer provided)
Summary of the content on the page No. 3
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page 1 CavVelocity 6381 DSL Modem with Inline Phone Filter Installation Instructions STEP 1 – Package Checklist Verify that your package contains the following: DSL Modem Power Supply RJ-11 Telephone Cable RJ-45 Two Ethernet Cable Telephone Filters 1
Summary of the content on the page No. 4
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page 2 STEP 2 – Installing the CavVelocity 6381 DSL Modem Place the CavVelocity 6381 DSL Modem on a flat surface with clearance for the rear connectors. 1. Connect the LINE port on the modem to the Phone jack using the supplied phone cable. 2. Connect the PHONE port on the modem to a normal telephone (optional, you may choose not to use phone port). 3. Connect the LAN port on the modem to a 10/100BaseT Ethernet Network card on your PC using the supplie
Summary of the content on the page No. 5
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page 3 Steps for Telephone Service Setting up Your PC for DSL Connect a microfilter to each phone jack where you When starting your PC (98, ME, 2000, XP, Macintosh), check for: are using a telephone or other device on the same Ethernet card properly installed and working phone line as the DSL modem. DSL filters block the Power, line and Ethernet lights are on and functioning on your DSL signal from reaching your phone, fax, and other DSL modem. If yo
Summary of the content on the page No. 6
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page 4 Setup Instructions for Windows XP Click on Use the following DNS server addresses 1. Click your Start button, Run. In the run bar type NCPA.CPL. Add the primary and secondary DNS numbers below based Click the OK button upon your state 2. A Network Connections window will open (Fig 1.1) • VA & MD: 64.83.0.10 Right click on Local Area Connection, left click on • VA & MD: 64.83.1.10 Properties • PA: 209.137.171.10 • PA: 209.137.171.20 3. The Local
Summary of the content on the page No. 7
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page 5 Setup Instructions for Windows 2000 1. Right click on My Network Places, click on Properties (Fig 2.1) Add the primary and secondary DNS numbers below based upon your state 2. A Network and Dial-Up Connections window will open up (Fig 2.2) • VA & MD: 64.83.0.10 Right click on Local Area Connection, left click on Properties • VA & MD: 64.83.1.10 • PA: 209.137.171.10 3. A Local Area Connection Properties window will open up (Fig 2.3) • PA: 209.1
Summary of the content on the page No. 8
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page 6 Setup Instructions for Windows 98/ME 1. Right click on Network Neighborhood, left click on Properties 4. Click on the DNS Configuration tab (Fig 3.4) (Fig 3.1). Click on Enable DNS Type in the Host name (“My Computer”) 2. Click on the Configuration tab (Fig 3.2) Type in the Domain, which is cavtel.net Go to TCP/IP for Ethernet card Add the primary and secondary DNS numbers below based upon your state 3. Click on the IP Address tab (Fig 3.3) •
Summary of the content on the page No. 9
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page 7 Setup Instructions for Macintosh OS X (10.3) Note: Screenshots may be different, depending on your version of 5. Click on the Gateway Tab (Fig 3.5) the OS X operating system.) Add the Gateway Address provided in your welcome letter 1. Click on the Apple Menu in the top, left corner of your screen 6. Click the OK button and select System Preferences. (Fig 4.1) 7. Click OK at the Network window 2. Click on Network (Fig 4.2) 8. You’re computer may
Summary of the content on the page No. 10
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page 8 Enter 255.255.255.0 in the Subnet Mask field Network Test Enter your default gateway To check to see if you are connected to our network: from the welcome letter in Go to Start, Run, type in “command” and ping your DNS Server the Router field IP (ie. “ping 64.83.0.10”) The DNS Server IP is provided in your In the DNS Servers field, welcome packet. enter the DNS server’s If you get a reply back you are ready to “ping” someone else. address de
Summary of the content on the page No. 11
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page c3 If you’ve followed the instructions and it’s still not working, please try the following steps: may need to be reinstalled or replaced. Please refer to the IF none of the lights are lit: instruction manual for your ethernet card, or contact the manu- 1. Make sure that you are using the power supply provided with the facturer for your ethernet card to ensure the drivers for the card modem. are installed and functioning properly. 2. Try pluggin
Summary of the content on the page No. 12
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page c4 C ISP Technical Help Desk – 877-459-9182
