HP (Hewlett-Packard) F768WM user manual

Summary of the content on the page No. 1

Memory Modules
User Guide

Summary of the content on the page No. 2

© Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: November 2007 Document Part Number: 460531-001

Summary of the content on the page No. 3

Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. iii

Summary of the content on the page No. 4

iv Product notice

Summary of the content on the page No. 5

Table of contents Adding or replacing a memory module Index ..................................................................................................................................................................... 5 v

Summary of the content on the page No. 6

vi

Summary of the content on the page No. 7

Adding or replacing a memory module The computer has one memory module compartment, which is located on the bottom of the computer. The memory capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Ele

Summary of the content on the page No. 8

8. Lift the memory module compartment cover (2) away from the computer. 9. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. To protec

Summary of the content on the page No. 9

CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the

Summary of the content on the page No. 10

15. Reconnect external power and external devices. 16. Turn on the computer. 4 Adding or replacing a memory module

Summary of the content on the page No. 11

Index M memory adding memory modules 1 replacing memory modules 1 upgrading memory modules 1 memory module adding 1 inserting 2 removing 2 replacing 1 upgrading 1 memory module compartment cover removing 2 replacing 3 Index 5

Summary of the content on the page No. 12