Summary of the content on the page No. 1
iPhone not included
User Guide
English ........................ 2
Deutsch ....................... 8
Français ......................15
Español ..................... 22
Italiano ...................... 29
Dutch ........................ 36
Korean ....................... 43
Norwegian ................ 50
Danish ........................57
Japanese ....................64
Simplified Chinese .....71
Finnish ...................... 78
Russian ......................85
Português .................. 92
®
®*
jbl
Summary of the content on the page No. 2
Important Safety Instructions Please read the following precautions before use: 16. To completely disconnect this apparatus from the AC mains, 1. Read these instructions. disconnect the power supply cord plug from the AC receptacle. 2. Keep these instructions. 17. The mains plug of the power supply cord shall remain readily operable. 3. Heed all warnings. 18. Do not expose batteries to excessive heat such as sunshine, 4. Follow all instructions. fire or the like. 5. Do not use this ap
Summary of the content on the page No. 3
fcc regulations FCC Information for Users This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio and Television Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
Summary of the content on the page No. 4
jbl on stage micro II easy setup guide Carefully unpack your speaker Step 2. Move the battery door to Step 3. Place 4 AAA batteries Step 4. Connect the power adapter system and identify all its the unlocked position to open in the battery compartment. into the jack labeled “6V DC In” on components. JBL On Stage the battery compartment. the rear of the JBL On Stage Micro Micro II, power supply, remote II and plug the power adapter into and adapter. a wall outlet or power strip. or * Auxilary
Summary of the content on the page No. 5
troubleshooting your jbl on stage micro II Technical Specifications Troubleshooting Possible Problem Solution Symptom Frequency Response: No power to the system Ensure that the power supply is connected to a live No sound from the 70Hz – 20kHz power source and properly connected to the JBL On JBL On Stage Micro II Power adapter plug is not Stage Micro II. Note: When the JBL On Stage Micro II speaker system Power Consumption: inserted correctly is powered, a green power LED on the JBL On St
Summary of the content on the page No. 6
Troubleshooting Symptom Possible Problem Solution No sound from the JBL On Stage The JBL On Stage Micro II has been Press the JBL On Stage Micro II Power button to turn the unit Micro II speaker system (continued) muted for more than 10 minutes in the back on. Press either (+) or (–) to unmute. battery-only mode No sound, no LED No audio signal has been received for Make sure audio signal is supplied through docked iPhone/iPod or “Audio In” jack. 10 minutes and JBL On Stage Micro II is in st
Summary of the content on the page No. 7
Troubleshooting Symptom Possible Problem Solution Note There is no sound coming from No power to unit. Make sure that the wall outlet Is the LED on? If the LED the JBL On Stage Micro II. or power strip has power. is not on, power is not Make sure that all switches for getting to your JBL On Stage outlet/power strip are on and Micro II. Try the solutions that all switches for the unit shown. are on. Make sure that the iPhone/iPod Incorrect source selection. is properly docked or that the a
Summary of the content on the page No. 8
Troubleshooting Symptom Possible Problem Solution Note Distortion (static, cracking Audio source or source material Test the JBL On Stage Micro II Does the distortion occur with or hissing sounds). may be the problem. with another source. specific songs? If so, check the recording or record the source again. Volume level may be too high. Check the volume of the source. Some devices will distort the output signal if the volume is set to maximum. EQ setting may be too high. Check the EQ setti
Summary of the content on the page No. 9
jbl on stage micro II remote easy setup guide Volume Down Volume Up 1 1 iPhone/iPod Play/Pause Mute/Unmute iPhone/iPod Previous/Rewind iPhone/iPod Next/Fast Forward *Hold for “rewind” *Hold for “fast forward” iPhone/iPod Scroll Up iPhone/iPod Scroll Down iPhone/iPod Menu iPhone/iPod Select/Enter Additional Features: 1. In the battery-only mode, the JBL On Stage Micro II loudspeaker dock will turn off to save battery power when muted or paused for longer than 10 minutes. 2. In the wall a
Summary of the content on the page No. 10
JBL and Odyssey are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. *The trademark On Stage is used with permission of OSA International, Inc. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone/iPod not included. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod
