Summary of the content on the page No. 1
Summary of the content on the page No. 2
Congratulations on purchasing your Trio Personal Media Player! To get the most out of your purchase, please take the time to carefully read through this manual. Foreword If any problems occur during while using your Trio, please feel free to contact Mach Speed technical support at 580-272-0035, or by sending an email to mssupport@machspeed.com. Thank you for your support and cooperation! Mach Speed Technologies bears no responsibility for any damage or loss of personal data due to misus
Summary of the content on the page No. 3
Note: ● The playback times listed refer to the maximum playback times possible, using the best power savings. The actual playback time may differ as adjustments to screen brightness; power savings modes, volume, etc are made. ● As there are many brands of Micro SD cards in market, using different quality and speed standards. Therefore, we are unable to guarantee that our product will be compatible with all types or brands of Micro SD cards, but will be compatible with those Micro SD card
Summary of the content on the page No. 4
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or telephone reception, which can be determined by turning the equipment off and on, the user in encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver • Connect the equipment to an outlet on a circuit d
Summary of the content on the page No. 5
Caution 1． Do not use the player in exceptionally cold or hot, dusty, damp or dry environments. 2． Do not drop, strike, or throw your player. Physical damage to your player will void ALL warranties. 3． Please charge your battery when A. Battery power icon shows an empty icon; B. The system automatically shuts down and the power is soon off when you switch on the unit once again 4． Please always follow the correct disconnect procedures for your operating system. Do not disconnect power
Summary of the content on the page No. 6
1 2 3 45 6 7 8 9 10 ON OFF MIC IR /PREV NEXT/ VOL. VOL.+ 11 12 13 14 15 16 Button Description 1. Power switch 2. Built in Microphone 3. IR window 4. 【 】:Back Button 5. 【 】:Forward Button 6. 【 】: Up Button 7. 【 】:Down Button 8. VOL -：Volume down button 9. VOL+: Volume up button 10. 【 】: Play Button 11. Headphone jack 12. DC power charger port 13. USB Port 14. SD Card slot 15. TV OUT: TV output interface (composite, component, YPbPr) 16. HDMI, High-Definition Multimedia out
Summary of the content on the page No. 7
Remote control button function description： 1. Power off: press to power the player off. 2. : Mute 3.【 / 】【 / 】Back, Forward, Up, and Down Buttons 4. ESC key to return. 5. VOL-/VOL + volume increase and reduce. Basic Operations Powering ON or OFF Powering On: Switch the On/Off key to ON state. Then hold the [ ] button for 5 seconds to power on. Powering Off: Press and hold the [ ] button for 5 seconds to power off, and then set the power switch to the OFF position. Please
Summary of the content on the page No. 8
removing your SD card. With the player powered off, insert the SD card so that the golden “teeth” are on the underside of the card. Slide the card into the card slot, past flush, until you can feel it “click” into place. To remove the card, again make sure that the player is off, and press the card into the slot further. You will feel it “click” and a spring loaded mechanism will eject the card. Please do not use a dirty or damaged SD card, as this will damage the SD card slot on the playe
Summary of the content on the page No. 9
2. Once you have named your MP3 player, select Finish, and your Windows Media Player will open to the Sync tab. 3. Drag your music to the sync list (on the right of the screen) from the list on the left. Once you have selected the music you wish to add to the player, press Sync. 8
Summary of the content on the page No. 10
4. Windows Media player will load the songs on to your player. 5. Once all the songs you have added are synced to the unit, and Windows Media Player says that is safe to disconnect your MP3 player, disconnect the device. 9
Summary of the content on the page No. 11
COPY AND PASTE Note- This alternate method is used to load videos, pictures, and ebook files as well as audio files 1. Connect the MP3 player to a working USB port. 2. When the unit is connected to your computer, it will create a gray and green icon in the system tray (lower right hand corner of your desktop). The icon will be called safely remove hardware. 3. Go to the “My Computer” section of your computer. In there you will find a section called “devices with removable stor
Summary of the content on the page No. 12
4. Locate the drive created by the unit, generally just called Removable Disk, with a letter in Parenthesis. Drive letters vary depending on your system configuration. 5. Open the drive by either double left clicking on the drive itself, or by right clicking to open the option menu then left click on the desired drive. 6. Locate the music stored on your computer. Generally this is stored in the “My Music” folder of your computer. NOTE: if you are unable to locate the music on your co
Summary of the content on the page No. 13
7. Once you have located the song files, you can right click on the song itself, and select “copy”. Open the removable disk drive, right click on in the empty space, and select Paste. This will transfer the song on to your player. 12
Summary of the content on the page No. 14
8. Repeat step 7 for as many songs as you want to copy on to the unit. NOTE: MAC Computers When connected to your MAC computer, the device will act as a removable drive. Simply drag your files to the device. Main menu: The Main Menu allows you to select the different Modes of the device. Use the Back and Forward buttons to select the different modes, and then the Up and Down buttons to select the different parameters of the Mode. When you highlight the parameters
Summary of the content on the page No. 15
Settings: 14
Summary of the content on the page No. 16
Output Select Output: Allows you to select whether to display through one of the TV out connections, or the onboard LCD. NOTE- if you select TV in this mode, the LCD will power off, and will not power back on until you have changed this setting (which you will need to do when connected to a TV). TV Format: Allows you to select which TV out component you are using; Composite, SD (standard definition) Interlace. SD Progressive, Component, or HDMI. This option will not take effect unt
Summary of the content on the page No. 17
Set Language： Allows you to select your display Language. Note- if you accidentally change your language follow these steps to correct it. 1. Power the player on 2. Press the Down button 5 times. (globe should be highlighted) 3. Press the PLAY button once 4. use the up or down arrows to select your language 5. Press the Play button again System information: Displays your system information, including the firmware version, internal memory, free space, SD memory, and SD free
Summary of the content on the page No. 18
Use the Up and Down buttons to select the different options and press the PLAY button to access it. The Media Library option will update your media library. We recommend using this option anytime you add or remove files from the player. Local disk allows you to access the audio files loaded to the player’s internal memory, and SD Card allows you to access the audio files loaded on the card. To select which file you wish to play, use the Up and Down buttons to select the file or folder. I
Summary of the content on the page No. 19
Live Sound Live Sound allows you to adjust your equalizer settings to improve your song quality. Show lyric When you select this option, you will see the song lyrics for your audio file displayed along with the song as it plays, as long as your .lrc files are present. If the .lrc file is not present, you will be prompted with a message stating "did not find song files”.To use lyric files, the .lrc file must be named identically to the audio file, and be stored in the same location
Summary of the content on the page No. 20
When selecting a video file you have began but not finished, you will be prompted with a message stating “continue from the last time?" If “Yes” is selected, it will continue to play from the point where you have stopped. Otherwise the video will start from the beginning. While a video file is playing: Press the Up or Down buttons to skip to the next or previous file in the list, press PLAY to pause or resume playing the file, forward to enter the Video Submenu, or Back to return to t
