Summary of the content on the page No. 1
May, 2008
Hardened VDSL Ethernet Extender
LB303A
Order toll-free in the U.S. Call : 877-877-BBOX ( Outside U. S. call 724-746-5500 )
CUSTOMER
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
SUPPORT
724-746-0746
INFORMATION
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
Summary of the content on the page No. 2
Hardened VDSL Ethernet Extender FEDERAL COMMUNICATIONS COMMISSION AND CANADIAN DEPARTMENT OF COMMUNICATIONS RADIO FREQUENCY INTERFERENCE STATEMENT Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur
Summary of the content on the page No. 3
Hardened VDSL Ethernet Extender 8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de operación. Todo otro servicio deberá ser referido a personal de servicio calificado. 9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes q
Summary of the content on the page No. 4
Hardened VDSL Ethernet Extender Preface This manual describes how to install and use the Hardened VDSL Ethernet Extender. The Hardened VDSL Ethernet Extender introduced here provides one channel for Ethernet over VDSL. The Hardened VDSL Ethernet Extender fully complies with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX/FX standards. In this manual, you will find: Product overview FEATURES ON THE HARDENED VDSL ETHERNET EXTENDER Illustrative LED functions Installation instructi
Summary of the content on the page No. 5
Hardened VDSL Ethernet Extender Table of Contents Preface 4 Table of Contents 5 Introduction 6 Product Overview 6 Product Features 6 Packing List 6 One-Channel Hardened VDSL Ethernet Extender 8 Ports 8 VDSL Mode Settings 8 DIP switch 8 Front Panel & LEDs 9 Installation 10 Selecting a Site for the Equipment 10 DIN Rail Mounting 10 Connecting to Power 11 Specifications 12 5
Summary of the content on the page No. 6
Hardened VDSL Ethernet Extender Introduction The Hardened VDSL Ethernet Extender provides one channel for Ethernet over VDSL. This Hardened VDSL Ethernet Extender solution is perfectly fitted in the industrial applications or rugged environment. Product Overview Product Features Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and vibration for traffic control equipment Meets IEC61000-6-2 EMC Generic Standard Immunity for industrial environment Op
Summary of the content on the page No. 7
Hardened VDSL Ethernet Extender The Hardened VDSL Ethernet Extender USER’S MANUAL AC to DC Power Adaptor and Power Cable (optional) 7
Summary of the content on the page No. 8
Hardened VDSL Ethernet Extender One-Channel Hardened VDSL Ethernet Extender Ports The Hardened VDSL Ethernet Extender provides one TX port and one VDSL port. For the TX port, it uses RJ-45 connector and auto senses the speed of 10/100Mbps. For the VDSL port, it uses RJ-11 and Terminal Block connectors and auto senses the speed of 1/3/5/10/15/20/25/30/40/50Mbps. VDSL Mode Settings VDSL mode settings are made very simple by means of a DIP (Dual Inline Package) switch on the top panel of
Summary of the content on the page No. 9
Hardened VDSL Ethernet Extender Front Panel & LEDs LED Indicators The LED indicators give you instant feedback on status of the Hardened VDSL Ethernet Extender: LEDs State Indication Power1 Steady Power on Power2 Off Power off Power3 Ethernet Steady A valid Ethernet connection established Transmitting or receiving Ethernet data Flashing Link/ACT ACT stands for ACTIVITY Neither valid Ethernet connection established nor Off transmitting/receiving Ethernet data Ethernet Connec
Summary of the content on the page No. 10
Hardened VDSL Ethernet Extender Installation This chapter gives step-by-step installation instructions for the Hardened VDSL Ethernet Extender. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: • The ambient temperature should be between -34 to 74 degrees Celsius. • T
Summary of the content on the page No. 11
Hardened VDSL Ethernet Extender Connecting to Power Redundant DC Terminal Block Power Inputs or 12VDC DC Jack: 12VDC DC Jack Step 1: Connect the supplied AC to DC power adapter to the receptacle on the topside of the Hardened VDSL Ethernet Extender. Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into a standard AC outlet with the appropriate AC voltage. Redundant DC Terminal Block Power Inputs There are two pairs of power inputs can be used to po
Summary of the content on the page No. 12
Hardened VDSL Ethernet Extender Specifications Applicable Standards IEEE802.3 10Base-T IEEE802.3u 100Base-TX Ethernet over VDSL Fixed Ports 1 x 10/100Mbps Ethernet port with RJ-45 connector 1 x Ethernet over VDSL port with RJ-11 and Terminal Block connectors Speed 10Base-T 10/20Mbps for half/full-duplex 100Base-TX 100/200Mbps for half/full-duplex Ethernet over VDSL 1, 3, 5, 10, 15, 20, 25, 30, 40, 50Mbps Switching Method Store-and-Forward Forwarding rate 14,880/148,810pps for 10/
Summary of the content on the page No. 13
Hardened VDSL Ethernet Extender Standards ESD Standard (EN61000-4-2) Radiated FRI Standards (EN61000-4-3) Burst Standards (EN61000-4-4) Surge Standards (EN61000-4-5) Induced RFI Standards (EN61000-4-6) Magnetic Field Standards (EN61000-4-8) Voltage Dips Standards (EN61000-4-11) Environmental Test Compliance: Vibration Resistance (IEC60068-2-6) Shock (IEC60068-2-27) Free Fall (IEC60068-2-32) NEMA TS1/2 Environmental requirements for traffic control equipment 13
