Summary of the content on the page No. 1
VigorPro 5500 Series
Unified Security Firewall
User’s Guide
Version: 3.0
Date: 2007/05/02
Copyright 2007 All rights reserved.
This publication contains information that is protected by copyright. No part may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright
holders. The scope of delivery and other details are subject to change without prior notice.
Mi
Summary of the content on the page No. 2
Safety Instructions and Approval Safety Read the installation guide thoroughly before you set up the router. Instructions The router is a complicated electronic unit that may be repaired only be authorized and qualified personnel. Do not try to open or repair the router yourself. Do not place the router in a damp or humid place, e.g. a bathroom. The router should be used in a sheltered area, within a temperature range of +5 to +40 Celsius. Do not expose the router to direct sunl
Summary of the content on the page No. 3
European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: VigorPro 5500 DrayTek Corp. declares that VigorPro 5500 Series is in compliance with the following essential requirements and other relevant provisions of R&TTE Directive 1999/5/EEC. The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 89/336/EEC by complying with the requirements set for
Summary of the content on the page No. 4
T Ta ab blle e o of f C Co on nt te en nt ts s 1 Preface ...............................................................................................................1 1.1 Web Configuration Buttons Explanation ................................................................................. 1 1.2 LED Indicators and Connectors .............................................................................................. 1 1.2.1 For VigorPro 5500 .......................................
Summary of the content on the page No. 5
3.4.4 Service Type Group........................................................................................................54 3.4.5 CSM Profile..................................................................................................................... 55 3.5 Firewall.................................................................................................................................. 57 3.5.1 Basics for Firewall.......................................................
Summary of the content on the page No. 6
3.14.3 Security....................................................................................................................... 137 3.14.4 Access Control............................................................................................................ 138 3.14.5 WDS............................................................................................................................ 140 3.14.6 AP Discovery ...............................................................
Summary of the content on the page No. 7
5.1 Create a LAN-to-LAN Connection Between Remote Office and Headquarter ....................211 5.2 Create a Remote Dial-in User Connection Between the Teleworker and Headquarter...... 218 5.3 QoS Setting Example.......................................................................................................... 222 5.4 LAN – Created by Using NAT ............................................................................................. 225 5.5 Upgrade Firmware for Your Router.....
Summary of the content on the page No. 8
Summary of the content on the page No. 9
1 Preface Preface The VigorPro5500 series router provides Dual-WAN interface (which is a configurable second WAN) for Internet access to make the Internet connection more reliable. The wireless LAN supports more secure features and the transmission speed is up to 108Mbps TM (Super G ). Object-oriented firewall is flexible and allows your network be safe. 1 1..1 1 W We eb b C Co on nf fiig gu ur ra at tiio on n B Bu ut tt to on ns s E Ex xp plla an na at tiio on n Several main bu
Summary of the content on the page No. 10
1 1..2 2..1 1 F Fo or r V Viig go or rP Pr ro o 5 55 50 00 0 LED Status Explanation ACT (Activity) Blinking The router is powered on and running normally. Off The router is powered off. Virus On The anti-virus function is enabled. (Yellow) IDP (Intrusion Detection and On The anti-intrusion function is enabled. Prevention) (Yellow) DMZ On DMZ Host is specified in certain site. Monitor On LAN traffic monitor is active. VPN On The VPN tunnel is launched. Off The VPN tunnel is clo
Summary of the content on the page No. 11
1 1..2 2..2 2 F Fo or r V Viig go or rP Pr ro o 5 55 50 00 0G G LED Status Explanation ACT (Activity) Blinking The router is powered on and running normally. Off The router is powered off. Virus On The anti-virus function is enabled. (Yellow) IDP (Intrusion Detection and On The anti-intrusion function is enabled. Prevention) (Yellow) DMZ On DMZ Host is specified in certain site. Monitor On LAN traffic monitor is active. VPN On The VPN tunnel is launched. Off The VPN tunnel is
Summary of the content on the page No. 12
1 1..2 2..3 3 F Fo or r V Viig go or rP Pr ro o 5 55 50 00 0ii LED Status Explanation ACT (Activity) Blinking The router is powered on and running normally. Off The router is powered off. On (Yellow) Virus The anti-virus function is enabled. IDP (Intrusion Detection and On The anti-intrusion function is enabled. Prevention) (Yellow) DMZ On DMZ Host is specified in certain site. Monitor On LAN traffic monitor is active. VPN On The VPN tunnel is launched. Off The VPN tunnel is c
Summary of the content on the page No. 13
1 1..2 2..4 4 F Fo or r V Viig go or rP Pr ro o 5 55 50 00 0G Gii LED Status Explanation ACT (Activity) Blinking The router is powered on and running normally. Off The router is powered off. On (Yellow) Virus The anti-virus function is enabled. IDP (Intrusion Detection and On The anti-intrusion function is enabled. Prevention) (Yellow) DMZ On DMZ Host is specified in certain site. Monitor On LAN traffic monitor is active. VPN On The VPN tunnel is launched. Off The VPN tunnel i
Summary of the content on the page No. 14
Interface Description RST Restore the default settings. (Factory Reset) Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration. ISDN Connect for NT1 (or NT1+) box provided by ISDN service provider. WAN(1/2) Connecter for remote networked devices. LAN/Monitor Connecter for local networked
Summary of the content on the page No. 15
1.3 Hardware Installation 1.3 Hardware Installation This section will guide you to install the router through hardware connection and configure the router’s settings through web browser. Before starting to configure the router, you have to connect your devices correctly. 1. Connect the power cord to the router’s power port on the rear panel, and the other side into a wall outlet. 2. Power on the device by pressing down the power switch on the rear panel. 3. The system starts to initi
Summary of the content on the page No. 16
8 VigorPro5500 Series User’s Guide
Summary of the content on the page No. 17
2 Configuring Basic Settings Configuring Basic Settings For use the router properly, it is necessary for you to change the password of web configuration for security and adjust primary basic settings. This chapter explains how to setup a password for an administrator and how to adjust basic settings for accessing Internet successfully. Be aware that only the administrator can change the router configuration. 2 2..1 1 C Ch ha an ng giin ng g P Pa as ss sw wo or rd d To change the
Summary of the content on the page No. 18
3. Now, the Main Screen will pop up. Note: The home page will change slightly in accordance with the router you have. 4. Go to System Maintenance page and choose Administrator Password. 5. Enter the login password (the default is blank) on the field of Old Password. Type a new one in the field of New Password and retype it on the field of Retype New Password. Then click OK to continue. 6. Now, the password has been changed. Next time, use the new password to access the Web Configur
Summary of the content on the page No. 19
2.2 Quick Start Wizard 2.2 Quick Start Wizard If your router can be under an environment with high speed NAT, the configuration provide here can help you to deploy and use the router quickly. The first screen of Quick Start Wizard is entering login password. After typing the password, please click Next. On the next page as shown below, please select the WAN interface that you use. Choose Auto negotiation as the physical type for your router. Then click Next for next step. VigorPro5
Summary of the content on the page No. 20
On the next page as shown below, please select the appropriate Internet access type according to the information from your ISP. For example, you should select PPPoE mode if the ISP provides you PPPoE interface. Then click Next for next step. In the Quick Start Wizard, you can configure the router to access the Internet with different protocol/modes such as PPPoE, PPTP, Static IP or DHCP. The router supports the DSL WAN interface for Internet access. 2.2.1 PPPoE 2.2.1 PPPoE PPPoE st
