Juniper Networks ERX-710 user manual

Summary of the content on the page No. 1

About This Guide
This E-Series Installation and User Guide provides the information you
need to install and start the E-series router.
Note: If the information in the latest E-series Release Notes differs from the
information in this guide, follow the E-series Release Notes.
The E-series router is shipped with the latest system software installed. If
you need to install a future release or reinstall the system software, refer
to the procedures in Appendix B, Installing JUNOSe Software.
E-Series

Summary of the content on the page No. 2

xvi About This Guide Audience This guide is intended for experienced system and network specialists working with E-series routers in an Internet access environment. Conventions Table 1 defines notice icons used in this guide, and Table 2 defines text conventions used throughout the book, except for command syntax. Table 3 provides command syntax conventions used primarily in the E-Series Command Reference Guide. For more information about command syntax, see E-Series System Basics Configuration Gui

Summary of the content on the page No. 3

Documentation xvii E-Series Routers Table 2 Text conventions (except for command syntax) (continued) Convention Description Examples Italics • Emphasize words. • There are two levels of access, user and privileged. • Identify variables. • clusterId, ipAddress. • Identify chapter, appendix, and book names. • Appendix A, System Specifications. Table 3 Syntax conventions in Command Reference Guide Convention Description Examples Words in plain text Represent keywords. terminal length Words in italic

Summary of the content on the page No. 4

xviii About This Guide management access, and general troubleshooting. Describes SRP modules, line modules, and I/O modules available for the E-series routers, and provides information about the compatibility of line modules and I/O modules with software releases. Lists the layer 2 protocols, layer 3 protocols, and applications that line modules and their corresponding I/O modules support. • E-Series System Basics Configuration Guide – Describes planning and configuring your network, managing the

Summary of the content on the page No. 5

Comments About the Documentation xix E-Series Routers MIBS Copies of the MIBs available in a software release are included on the JUNOSe Software CD (formerly ERX Edge Routers Software CD) and on the Web. Release Notes Release notes are included on the corresponding software CD and are available on the Web. In the Release Notes, you will find the latest information about features, changes, known problems, resolved problems, and system maximum values. If the information in the Release Notes differ

Summary of the content on the page No. 6

xx About This Guide Contacting Customer Support For technical support, contact Juniper Networks at support@juniper.net, or at 1-888-314-JTAC (within the United States) or 408-745-9500 (from outside the United States).