Summary of the content on the page No. 1
Summary of the content on the page No. 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd. Copyright © 2005 TP-LINK Technologie
Summary of the content on the page No. 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee t
Summary of the content on the page No. 4
EN 60950-1: 2001 EN 55022: 1998 + A1: 2000 + A2: 2003 EN61000-3-2:2001 EN61000-3-3:2001 EN 55024: 1998 +A1: 2001 + A2: 2003 European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz; In France, the equipment must be restricted to the 2.4465-2.4835GHz frequency range and must be restricted to indoor use.
Summary of the content on the page No. 5
Package contents.............................................................................................................. 1 Chapter 1: About this Guide .............................................................................................. 2 1.1 Purposes.............................................................................................................. 2 1.2 Conventions.......................................................................................................
Summary of the content on the page No. 6
5.8.5 Remote Management .............................................................................. 39 5.8.6 Advanced Security ................................................................................... 40 5.9 Static Routing..................................................................................................... 42 5.10 DDNS............................................................................................................... 43 5.10.1 Oray.net DDNS............
Summary of the content on the page No. 7
TL-WR641G 108M Wireless Router User Guide Package contents The following contents should be found in your box: One TL-WR641G 108Mbps Wireless Router One AC power Adapter for TL-WR641G 108Mbps Wireless Router Quick Installation Guide One Resource CD for TL-WR641G 108Mbps Wireless Router, including: • This Guide • Other Helpful Information Wall-mounting screws Note: If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased the TL-WR
Summary of the content on the page No. 8
TL-WR641G 108M Wireless Router User Guide Chapter 1: About this Guide Thank you for choosing the TL-WR641G 108Mbps Wireless Router. This router provides dedicated solution for Small Office/Home Office (SOHO) networks. With your network all connected, your local wired or wireless network can share Internet access, files and fun for multiple PCs through one ISP account. TM It adopts 108M Super G WLAN Transmission Technology, which offers the highest throughput performance available on t
Summary of the content on the page No. 9
TL-WR641G 108M Wireless Router User Guide Chapter 2: Introduction 2.1 Overview of the Router The TL-WR641G 108Mbps Wireless Router integrates 4-port Switch, firewall, NAT-router and Wireless AP. Its design is dedicated to Small Office/Home Office (SOHO) wireless network solutions. The TL-WR641G 108Mbps Wireless Router will allow you to connect your network wirelessly better than ever, sharing Internet Access, files and fun, easily and securely. In the most attentive wireless security,
Summary of the content on the page No. 10
TL-WR641G 108M Wireless Router User Guide Built-in NAT and DHCP server supporting static IP address distributing Supports Virtual Server, Port Triggering, and DMZ host Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address filtering Supports TCP/IP, PPPoE, DHCP, ICMP, NAT Supports UPnP, Dynamic DNS, Static Routing, VPN pass-through Supports Traffic Stat. Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter Ignores Ping packets from WAN or LAN
Summary of the content on the page No. 11
TL-WR641G 108M Wireless Router User Guide There are two ways to reset the router's factory defaults: 1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the router's Web-based Utility. 2) Use the Factory Default Reset button: First, turn off the router's power. Second, press and hold the default reset button then turn on the router's power, until the system LED lights up (about 3 seconds). Last, release the reset button and wait for the router to reboot. No
Summary of the content on the page No. 12
TL-WR641G 108M Wireless Router User Guide Chapter 3: Connecting the Router 3.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable modem that has an RJ45 connector (you do not need it if you connect the router to Ethernet) Each PC on the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP/IP protocol must be installed on each PC Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6
Summary of the content on the page No. 13
TL-WR641G 108M Wireless Router User Guide WAN 1 2 3 4 RESET To WAN To LAN Switch/Hub （） XDSL、、 Cable Ethernet Figure 3-1 Hardware Installation of the TL-WR641G 108Mbps Wireless Router - 7 -
Summary of the content on the page No. 14
TL-WR641G 108M Wireless Router User Guide Chapter 4: Quick Installation Guide After connecting the TL-WR641G Router into your network, you should configure it. This chapter describes how to configure the basic functions of your TL-WR641G Wireless Router. These procedures only take you a few minutes. You can access the Internet via the router immediately after successfully configured. 4.1 TCP/IP configuration The default IP address of the TL-WR641G 108Mbps Wireless Router is 192.168.1.1,
Summary of the content on the page No. 15
TL-WR641G 108M Wireless Router User Guide PC and the router has been established. Figure 4-2 Failed result of Ping command If the result displayed is similar to that shown in figure 4-2, it means that your PC has not connected to the router. Please check it following these steps: 1. Is the connection between your PC and the router correct? Note: The Link/Act LEDs of LAN port on the router and LEDs on your PC's adapter should be lit. 2. Is the TCP/IP configuration for your PC correc
Summary of the content on the page No. 16
TL-WR641G 108M Wireless Router User Guide Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. If the User Name and Password are correct, you can configure the router using the web browser. Please click the Quick Setup link on the left of the main menu and the Quick Setup screen will appear. Fi
Summary of the content on the page No. 17
TL-WR641G 108M Wireless Router User Guide contact your ISP. If you choose " Dynamic IP", the router will automatically receive the IP parameters from your ISP without needing to enter any parameters. If you Choose "Static IP", the Static IP settings page will appear, shown in figure 4-8: Figure 4-8 Quick Setup - Static IP Note: The IP parameters should have been provided by your ISP. IP Address - This is the WAN IP address as seen by external users on the Internet (including your
Summary of the content on the page No. 18
TL-WR641G 108M Wireless Router User Guide all wireless devices on your network. The default SSID is TP-LINK. This value is case-sensitive. For example, TP-LINK is NOT the same as TP-Link. Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the router can be used. It may be illegal to use the wireless function of the router in a region other than one of those specified in this filed. Channel - the current channel in use. T
Summary of the content on the page No. 19
TL-WR641G 108M Wireless Router User Guide Chapter 5: Configuring the Router This chapter describes each web page's key functions. 5.1 login After your successful login, you can configure and manage the router. There are ten main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus. The ten main menus are: Status, Quick Setup, Network, Wireless, DHCP, Forwarding, Security, Static Routing, DDNS and System Tools. On the right of the
Summary of the content on the page No. 20
TL-WR641G 108M Wireless Router User Guide Figure 5-1 Router Status 5.3 Quick Setup Please refer to Section 4.2: "Quick Installation Guide." 5.4 Network Figure 5-2 the Network menu There are three submenus under the Network menu (shown in figure 5-2): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. - 14 -
