Summary of the content on the page No. 1
Summary of the content on the page No. 2
Summary of the content on the page No. 3
ThinkStation User Guide
Summary of the content on the page No. 4
Note Before using this information and the product it supports, be sure to read the Safety and Warranty Guide that came with this product and Appendix B, “Notices,” on page 57. Second Edition (July 2008) © Copyright Lenovo 2005, 2008. Portions © Copyright International Business Machines Corporation 2005. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items
Summary of the content on the page No. 5
Contents Configuring the system BIOS to enable SAS Introduction . . . . . . . . . . . . .v RAID functionality . . . . . . . . . . .24 Configuring the system BIOS to enable SAS Chapter 1. Important safety information 1 RAID 0 functionality . . . . . . . . . .25 Additional safety requirements for machine types Configuring the system BIOS to enable SAS 6427, 6449, and 6493 . . . . . . . . . . . .1 RAID 1 functionality . . . . . . . . . .25 Configuring a mirrored volume with three t
Summary of the content on the page No. 6
Appendix A. Manual modem Appendix B. Notices . . . . . . . . .57 Television output notice . . . . . . . . . .58 commands . . . . . . . . . . . . .49 Trademarks . . . . . . . . . . . . . .58 Basic AT commands . . . . . . . . . . .49 Extended AT commands . . . . . . . . . .51 MNP/V.42/V.42bis/V.44 commands . . . . . .52 Index . . . . . . . . . . . . . . .59 Fax Class 1 commands . . . . . . . . . .53 Fax Class 2 commands . . . . . . . . . .53 Voice commands . . . . . . . . . . .
Summary of the content on the page No. 7
Introduction This User Guide contains the following information: v Chapter 1, “Important safety information,” on page 1 provides information about where to find safety information for this product. v Chapter 2, “Arranging your workspace,” on page 3 provides information about setting up your computer for comfort and the impact of light sources, air circulation, and electrical outlets. v Chapter 3, “Setting up your computer,” on page 5 provides information about setting up your com
Summary of the content on the page No. 8
vi User Guide
Summary of the content on the page No. 9
Chapter 1. Important safety information CAUTION: Before using this manual, it is important that you read and understand all the related safety information for this product. Refer to the Safety and Warranty Guide that you received with this product for the latest safety information. Reading and understanding this safety information reduces the risk of personal injury and or damage to your product. If you no longer have a copy of the Safety and Warranty Guide, you can obtain one online
Summary of the content on the page No. 10
2 User Guide
Summary of the content on the page No. 11
Chapter 2. Arranging your workspace To get the most from your computer, arrange both the equipment you use and your work area to suit your needs and the kind of work you do. Your comfort is of foremost importance, but light sources, air circulation, and the location of electrical outlets can also affect the way you arrange your workspace. Comfort Although no single working position is ideal for everyone, here are a few guidelines to help you find a position that suits you best. Sitting
Summary of the content on the page No. 12
Where it is impossible to avoid reflections or to adjust the lighting, an antiglare filter placed over the screen might be helpful. However, these filters might affect the clarity of the image on the screen; try them only after you have exhausted other methods of reducing glare. Dust buildup compounds problems associated with glare. Remember to clean your monitor screen periodically using a soft cloth as directed in your monitor documentation. Air circulation Your computer and monitor
Summary of the content on the page No. 13
Chapter 3. Setting up your computer Read and understand the Safety and Warranty Guide before you set up your computer. Reading and understanding the safety information reduces the risk of personal injury and or damage to your product. Set up your computer in the best possible work area that suits your needs and habits. For more information, see Chapter 2, “Arranging your workspace,” on page 3. Connecting your computer Use the following information when connecting your computer. v Lo
Summary of the content on the page No. 14
v If the voltage supply range is 100–127 V AC, set the switch to 115 V. v If the voltage supply range is 200–240 V AC, set the switch to 230 V. 2. Connect the keyboard cable to the appropriate keyboard connector, either the standard keyboard connector 1 or the Universal Serial Bus (USB) connector 2. Note: Some models will have keyboards with a fingerprint reader. 3. Connect the USB mouse cable to the appropriate mouse connector. 6 User Guide 115
Summary of the content on the page No. 15
4. Connect the monitor cable to the monitor connector on the computer. v If you have a Video Graphics Array (VGA) Standard monitor, connect the cable to the connector as shown. Note: If your model has two monitor connectors, be sure to use the connector on the graphics adapter. v If you have a digital video interface (DVI) monitor, your computer must have an adapter installed that supports the DVI monitor. Connect the cable to the connector as shown. Chapter 3. Setti
Summary of the content on the page No. 16
5. If you have a modem, connect the modem using the following information. 1 This illustration shows the two connections on the back of the computer that are needed to set up your modem. 2 In the United States and other countries or regions that use the RJ-11 telephone outlet, attach one end of the telephone cable to the telephone and the other end to the telephone connector on the back of the computer. Attach one end of the modem cable to the modem connector on the back of
Summary of the content on the page No. 17
7. If you have powered speakers with an ac adapter: a. Connect the cable that runs between the speakers, if necessary. On some speakers, this cable is permanently attached. b. Connect the ac adapter cable to the speaker. c. Connect the speakers to the computer. d. Connect the ac adapter to the ac power source. 8. If you have unpowered speakers with no ac adapter: a. Connect the cable that runs between the speakers, if necessary. On some speakers, this cable is per
Summary of the content on the page No. 18
1394 1394 9. Connect any additional devices that you have. Your computer might not have all connectors that are shown. 1 USB connector Use this connector to attach a device that requires a USB connection, such as a keyboard, mouse, scanner, printer, or personal digital assistant (PDA). 2 Serial connector Use this connector to attach an external modem, serial printer, or other device that uses a 9-pin serial connector. 3 S-video connector Use this connector to attach a tel
Summary of the content on the page No. 19
Turning on computer power Turn on the monitor and other external devices first, and then turn on the computer. When the power-on self-test (POST) is finished, the logo window closes. If your computer has preinstalled software, the software installation program starts. If you experience any problems during startup, refer to Chapter 10, “Getting information, help, and service,” on page 45. You can get additional help and information by telephone through the Customer Support Center. Refe
Summary of the content on the page No. 20
Updating your operating system Microsoft makes updates available for various operating systems through the Microsoft Windows Update Web site. The Web site automatically determines what Windows updates are available for your specific computer and lists those updates only. Updates could include security fixes, new versions of Windows components (such as media player), fixes to other portions of the Windows operating system, or enhancements. Installing other operating systems If you insta
