Epson Stylus Color 400 user manual

Summary of the content on the page No. 1

EPSON AMERICA, INC. EPSON
Product Support Bulletin
MS Windows 3.x Stylus 400/800+/Color Printer Driver problems
SUBJECT:
using the Progression/Progression4/NX-Epson/Endeavor-WG
PSB No: PSB S-0181
Date: 11/5/94
Originator: DS
Page(s): 1 of 2
This bulletin provides additional information to allow printer driver ver 1.03E for the Stylus 400,
800+ and Color printers to complete the installation process when connected to Epson
Progression/Progression4/NX-Epson and Endeavor-WG computers in the MS Wind

Summary of the content on the page No. 2

*NOTE: The latest version, v1.04, of the Stylus Printer Driver, file name STY104.EXE, is available on the Epson RBBS, resolves the above issue.

Summary of the content on the page No. 3

EPSON Product Support Bulletin Subject: Proper Method for Running Benchmark and Diagnostics Programs PSB No: S-0158 Date: 06/04/93 Originator: MWT Page(s): 1 of 1 This bulletin describes the proper method for running any benchmark or diagnostics programs. This applies to any computer system. In most cases, the computer should be started using an MS-DOS boot diskette that’s ‘clean’ - in other words, one with no CONFIG.SYS or AUTOEXEC.BAT files. The appropriate executable can then be run, eithe

Summary of the content on the page No. 4

PSB No.: S-0062I Page: 1 of 18 ENDEAVOR WG / PROGRESSION 4 VER PART # DESC TYPE LOC REASON 1.04.1.08 SYSTEM 27C010 U1 INITIAL RELEASE 1.04.1.08 SETUP 27C512 U113 1.06.1.09 2013112 SYSTEM 27C010 U1 Three text modes 62h,64h and 65h 1.06.1.09 2013113 SETUP 27C512 U113 have been restored. Incorporated new VGA BIOS (v1.10.03) which changed mode 072h (1024X768X4) back to interlaced. Fixed problem between EMM386.EXE and User defined HDD parameter tables from the BIOS extended data area into the sha