Summary of the content on the page No. 1
SM0404
DZ-MV580E
DZ-MV580E(AU)
SERVICE MANUAL
DZ-MV580E(SW)
DZ-MV580E(SWH)
DZ-MV580E(UK)
DZ-MV550E
DZ-MV550E(AU)
DZ-MV550E(SW)
DZ-MV550E(SWH)
DZ-MV550E(UK)
DZ-MV1000E(UK)
TM
MultiMediaCard
DO NOT RESELL OR DIVERT IMPROPERLY
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
DVD VIDEO CAMERA/RECORDER
March 2004 Digital Media Division,Tokai
Summary of the content on the page No. 2
Table of Contents 4-6 Checking Versions of Firmware and 1 Safety Precaution for Repair ............. 1-1 Updating ................................................... 4-27 1-1 Cautions ................................................... 1-1 4-6-1 Checking firmware versions................... 4-27 1-2 Electrostatic Protection Measures ............ 1-2 4-6-2 Updating firmware ................................. 4-28 1-3 Cautions When Handling DVD Drive ......... 1-2 4-7 Trouble Diagnosis ............
Summary of the content on the page No. 3
(18) Drive Block and Side Case-R ................ 5-14 6-4 Adjustment Procedure .............................. 6-24 (19) Loader, DRF-H/DRF Circuit Board, 6-4-1 Initial Data Write .................................... 6-24 Disc Drive Unit, Lock Unit, and Frame ... 5-15 6-4-2 Video Level ............................................ 6-25 (20) Fulcrum Cover-U, Fulcrum Cover-B, 6-4-3 Burst Level ............................................ 6-26 and Fulcrum Unit ..................................
Summary of the content on the page No. 4
C Circuit Board Diagrams ..................... C-1 B Block Diagrams .................................. B-1 C-1 GYR-H................................................... C-1 B-1 Video/Audio Signal Process .................. B-1 C-2 GYR ...................................................... C-1 B-2 Disc Drive .............................................. B-2 C-3 FRT-H .................................................... C-2 B-3 Power-1 ................................................. B-3
Summary of the content on the page No. 5
1 Safety Precaution for Repair 1-1 Cautions CAUTION Lithium battery; danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. When replacing the lithium battery it is important to use the same type and connect it correctly. WARNING: Lithium batteries contain dangerous chemicals. Handle and dispose of with great care. Do not throw in a fire. Do
Summary of the content on the page No. 6
Safety Precaution for Repair > Electrostatic Protection Measures / Cautions When Handling DVD Drive 1-2 Electrostatic Protection Measures Semiconductor components can be damaged by static electricity charged on clothes, human body, etc. Take great care when handling components to avoid electrostatic damage, and perform servicing in an environment where grounding is complete. (1) Grounding work bench (Fig. 1-2-1) Lay out an antistatic mat on work bench, and then use the ground plate to ground the
Summary of the content on the page No. 7
Safety Precaution for Repair > Lead-Free Solder 1-4 Lead-Free Solder The printed circuit board that uses lead-free solder is adopted. To protect the global environment, use the recommended lead-free solder also during servicing. Read and observe the following before soldering: Caution ALWAYS wear protective goggles during soldering so that no solder smoke or scattered solder enters the eye. Lead-free solder may scatter at high temperatures of 600°C. (1) Identification of circuit boards that use
Summary of the content on the page No. 8
Safety Precaution for Repair > Lead-Free Solder (5) Cautions when using lead based solder It is recommended that you use lead-free solder when servicing, but it is also possible to service using lead based solder. However, if lead based solder is used for servicing, take care with the following: 1) Before using lead based solder, remove the lead-free solder completely from the point to be soldered. 2) For additional soldering for repair, set the soldering iron tip temperature for lead-free solde
Summary of the content on the page No. 9
Safety Precaution for Repair > Notes When Using Service Manual 1-5 Notes When Using Service Manual (1) Value units used in parts list Certain symbols are indicated as shown below for value units of resistors, capacitors and coils in parts list. When you read them, note the following regular indications: Parts Indication in list Regular indication ......................................... Resistor KOHM k ................................................ Capacitor UF µF .......................
Summary of the content on the page No. 10
Safety Precaution for Repair > Notes When Using Service Manual (4) Table for indexing locations of parts This table shows locations of each part on circuit board diagrams. The locations are indicated using the guide scales on the external lines of diagrams. 1) One diagram indicated for each board 2) Two diagrams indicated for each board Symbol Parts Symbol Parts No. Location No. Location Type of part IC IC IC1201 2 A IC1201 A - 2 A Zone "A" on board Zone "A" on circuit board Symbol
Summary of the content on the page No. 11
2 General Description 2-1 Overview The DZ-MV580E has been made more compact than the previous DZ-MV380E; the DZ-MV550E has been made compact than the DZ-MV350E. The DZ-MV580E has a CCD image sensor with a total of 1,020,000 pixels and a high-performance optical 10-power zoom. The DZ-MV550E has a CCD image sensor with a total of 800,000 pixels and an optical 18-power zoom. 2-1-1 Servicing method Refer to the following table and perform the designated, appropriate servicing. Any changes that occur
Summary of the content on the page No. 12
General Description > Features / Specifications 2-2 Features QUICK MODE SWITCH QUICK MODE switch mounted The new DVD video camera/recorder has a QUICK MODE switch that switches the on-screen display between Quick mode and Normal mode: The new timer of video camera/recorder can easily operate the screen display in Quick mode. The Quick mode displays only the fundamental menu items; a brief explanation of the selected item is displayed across the bottom of screen. Fig. 2-2-1 2-3 Specifications Ite
Summary of the content on the page No. 13
General Description > Specifications Item Specifications Maximum DVD-RAM disc (per side) 999 However, if video and photo are mixed on one disc, number of the recordable number will decrease recordable SD memory DZ-MV580E Approx. 50 (in FINE mode) Varies depending on the photos Card recording quality and the type of card (When using DZ-MV550E Approx. 220 (in FINE mode) Varies depending on the 32MB card) recording quality and the type of card Recording DVD-RAM disc Video: Conforming to DVD video
Summary of the content on the page No. 14
General Description > Specifications Item Specifications Provided accessories AC adapter/charger (model DZ-ACS1) Power cable DC power cord, Battery (model DZ-BP14S) (*1) AV/S input /output cable Infrared remote control (model DZ-RM3W) Lithium battery for remote control (model CR2025) Lens cap Lens cap string Shoulder strap Software CD-ROM PC connection cable Single-sided 8cm DVD-RAM disc (in round DVD holder) *1: The line input function is provided in the following models: DZ-MV580E(AU)/MV580E(
Summary of the content on the page No. 15
General Description > Major Differences from Previous Models 2-4 Major Differences from Previous Models : Same as on left Item DZ-MV580E/MV550E DZ-MV380E/MV350E CCD DZ-MV580E: 1/3.8-inch interlaced DZ-MV380E: DZ-MV550E: 1/6-inch interlaced DZ-MV350E: 1/4-inch interlaced Total number DZ-MV580E: DZ-MV380E: of pixels Approx. 1,020,000 pixels DZ-MV550E: DZ-MV350E: Approx. 800,000 pixels Number of DZ-MV580E: DZ-MV380E: effective pixels Video: Approx. 570,000 pixels Photo: Approx. 960,000 pixels DZ-M
Summary of the content on the page No. 16
General Description > Major Differences from Previous Models Item DZ-MV580E/MV550E DZ-MV380E/MV350E Dimensions (W × H × D) and DZ-MV580E: DZ-MV380E: shape Approx. 64 × 89 × 146 mm Approx. 60 × 93 × 148 mm DZ-MV550E: DZ-MV350E: Approx. 64 × 89 × 146 mm Approx. 57 × 89 × 134 mm AC adapter/charger DZ-ACS1 Battery pack Provided: DZ-BP14S (7.2V/1360mA) Optional: DZ-BP14SW (7.2V/1360mA) Infrared remote control DZ-RM3W (*1) AV input /output jack Pin 8 type Pin 10 type Shape of DVD holder Round DVD hold
Summary of the content on the page No. 17
General Description > Major Differences from Previous Models Item DZ-MV580E/MV550E DZ-MV380E/MV350E Number of pixels for photo JPEG: 640 × 480 pixels Line input function is not provided. (*1) during line input recording MPEG: 704 × 576 pixels File size of photo DZ-MV580E: DZ-MV380E: FINE: Approx. 512KB NORM: Approx. 384KB ECO: Approx. 256KB DZ-MV550E: DZ-MV350E: FINE: Approx. 128KB NORM: Approx. 64KB ECO: Approx. 32KB *1: The line input function is provided in the following models: DZ-MV580E(AU
Summary of the content on the page No. 18
General Description > Compatibility of Recorded Discs 2-6 Compatibility of Recorded Discs Discs recorded or edited on DZ-MV580E/MV550E can also be recorded, edited and played back on (*1) other DVD video camera/recorders, except for those for which disc-protect has been set. Discs recorded or edited on other DVD video camera/recorders can also be recorded, edited and played back on DZ-MV580E/MV550E: However, the DZ-MV100E cannot handle DVD-R disc, and a scene memo recorded on the DZ-MV100E Disc
Summary of the content on the page No. 19
General Description > Names of Parts 2-7 Names of Parts 1 Infrared receiver 56 7 8 9 When the remote control is used to operate the DVD video camera/recorder, this receiver will receive the infrared signal. 2 Lens cap string attachment hole 3 Recording indicator The red indicator will light during recording. 4 Stereo microphone 5 Optical 18 x zoom lens (DZ-MV550E) Optical 10x zoom lens (DZ-MV580E) 6 Lens hood Always remove this lens hood when using generally available tele-conversion or wide
Summary of the content on the page No. 20
General Description > Names of Parts 28 29 30 31 32 33 34 28 FULL AUTO button To switch the DVD video camera/recorder to full automatic. 29 FOCUS button To switch between manual focus and autofocus. 30 EXPOSURE button Press this button to adjust the exposure. 31 BLC (backlight compensation) button Press this button when subject is being lighted from rear. 32 DISC NAVIGATION button 33 SELECT button 34 MENU button Press this button to display the menu for setting camera functions and Disc Naviga
