Summary of the content on the page No. 1
EN INSTRUCTIONS 2
FR MODE D’EMPLOI 23
ES INSTRUCCIONES 45
PO INSTRUÇÕES 67
CH 89
CS1080000000– A0702
KR 111
Summary of the content on the page No. 2
2 3 WARNING CONTENTS Read this manual carefully before using your camera. Names of parts Camera body ...................................................................... 4 Indicates circumstances under which mishandling resulting from ignoring this symbol could result in Viewfinder display/LCD panel ............................................. 5 personal injury or property damage. Using the strap/Diopter adjustment ........................................ 6 Loading and checking the battery ..
Summary of the content on the page No. 3
4 5 NAMES OF PARTS — Camera Body NAMES OF PARTS — Viewfinder Display/LCD Panel Viewfinder Display Selftimer/remote control 2 3 1 Autofocus marks Viewfinder indicator 2 Spot marks Autofocus 5 Light sensor 3 Close-up correction marks window Shutter release button Flash 4 1 Zoom lever 4 Green lamp Strap eyelet The subject is in focus. Press the shutter Lights You can shoot release button all the way to take the picture. The subject is not in focus. The shutter will not You can’t Lens Blinks rel
Summary of the content on the page No. 4
6 7 USING THE STRAP LOADING AND CHECKING THE BATTERY Use one 3 V lithium battery (CR123A or DL123A). Attach the strap as shown. 1. While pressing the bottom of 1 the battery compartment cover in direction 1, turn it in direction 2 to open. Make sure the lens barrier is closed before opening the battery compartment cover. 2. Insert the battery correctly. 2 Close the battery compart- ment cover. A brand-new battery lasts for about 15 rolls of film. 3. Slide the lens barrier in 3 direction 1 until
Summary of the content on the page No. 5
8 9 LOADING THE FILM TAKING PICTURES 1. Slide the back cover release upward 1. Open the lens barrier until it 1 1 to open the back cover. clicks. The lens will extend slightly and the LCD panel will Do not touch the inside of the turn on. Compose your shot. camera, especially the lens. Push the zoom lever to the “T” side for telephoto (100mm) or to 2. Insert the film cartridge until it the “W” side for wide angle clicks in position. (28mm). ISO400 film is recommended. If you are going to use non
Summary of the content on the page No. 6
FLASH PHOTOGRAPHY 10 11 Setting the Flash Mode This camera has six flash modes. Choose the mode best Working Distance suited to the photographic conditions and your requirements. The distance to your subject is 0.6 m (2.0 ft) to infinity at the wide- How to select the mode angle side and 0.8 m (2.6 ft) to infinity at the telephoto side. Press the flash mode button ( ). The If the green indicator blinks, the shutter cannot be released. mode switches in the order shown Although the shutter wil
Summary of the content on the page No. 7
FLASH PHOTOGRAPHY FLASH PHOTOGRAPHY 12 13 Auto Flash Flash-Off Use this mode in situations where flash photography is not 1 2 desired or is prohibited and in twilight or night scenes. 1. Press the shutter release button to 2. Press the shutter release make sure the orange lamp lights. button all the way to take the picture. Closing the lens barrier restores the Auto Flash mode. Flash working range (with color negative film) ISO Wide angle (W) Telephoto (T) Since a slow shutter speed (as low as
Summary of the content on the page No. 8
FLASH PHOTOGRAPHY EXPOSURE MODES 14 15 Night Scene Flash Setting the Exposure Mode Use this mode to clearly shoot a subject in the foreground This camera has three exposure modes. Choose the mode that best suits the conditions and your requirements. and a night scene in the background. How to select the mode Press the flash exposure button ( / ). The mode switches in the order shown below. The selected mode is displayed on the LCD panel. Mode display Exposure mode Function Closing the lens barr
Summary of the content on the page No. 9
16 17 USING THE SELFTIMER/REMOTE CONTROL RC-300C (Optional) If the selftimer/remote control indicator doesn’t blink even How to select the mode when you press the button, replace the battery with a new Press the selftimer/remote control one (CR2025). button ( / ). The mode switches in the order shown below. The selected How to replace the battery of the remote control (RC-300C) mode is displayed on the LCD panel. 1. Turn the screw on the bottom of the 1 remote control counterclockwise to loosen.
Summary of the content on the page No. 10
CORRECTING THE DATE AND TIME PRINTING THE DATE/TIME 18 19 (Quartzdate models only) (Quartzdate models only) Be sure to correct the date and time after the batteries have First select the date/time mode you want to print. been inserted or replaced. Press the MODE button. As you 1. Keep the MODE button pressed press it, the mode will switch in 1 until the “year” indicator starts the order shown below. blinking. Keep the mode you want to print displayed. 2. Press the SET button to adjust the “year”
Summary of the content on the page No. 11
20 21 CARE AND STORAGE SPECIFICATIONS Type: Fully automatic 35 mm autofocus lens-shutter Do not leave the camera in any place exposed to excessive heat, camera with built-in 28 ~ 100 mm zoom lens. humidity or direct sunlight — for example, in a car or on the Film format: 35 mm standard DX-coded film (24 x 36 mm). beach. Lens: Olympus lens, 28 ~ 100 mm, F4.6 ~ 11.9, 7 elements Do not expose the camera to formalin or naphthalene. in 7 groups. Shutter: Programmed electronic shutter. If the camer
Summary of the content on the page No. 12
22 Flash modes: Auto Flash (automatic flash activation in low-light, backlight and fluorescent light), Red-Eye Reduction Flash (same as auto otherwise), Flash-Off (flash override with shutter speed extended to 2-sec. max.), Fill-In (forced activation), Night Scene flash (with shutter speed extended to 4-sec. max.) and Red-Eye Reduction Night Scene Flash (with shutter speed extended to 4-sec. max.) Exposure modes: Auto Exposure, Spot Metering and Infinity. Battery check: Displayed on LCD panel. P
