Summary of the content on the page No. 1
D1812
PORTABLE 8" LCD MONITOR AND DVD PLAYER
Summary of the content on the page No. 2
Content A. Introduction ............................................................................ 1 B. Cautions and Warnings ........................................................ 1 C. Contents ............................................................................... 3 D. Powering and installation ..................................................... 3 E. Controls, Indicators, and Connectors ................................... 4 F. Loading and Playing a Disc ..........................
Summary of the content on the page No. 3
Notice: This Product incorporates copyright protection technology that is pro- tected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights own- ers. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited view- ing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Summary of the content on the page No. 4
A. Introduction Thank you for choosing the 8” portable DVD player. The main fea- tures include a 8" Wide Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices or your home. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy installation. Please re
Summary of the content on the page No. 5
the unit. To ensure proper ventilation and proper operation, never cover or block the slots and openings with a cloth or other material. Keep the unit away from an open flame such as fire, candle etc. It is hazardous to replace the battery incorrectly. Replace the battery only with the same or equivalent type, in order to protect the enviromnent, please dispose the battery properly. Do not use the unit in temperatures higher than 95 degrees Fahrenheit or 35 de- grees Cus. 4.Disassemble Do not at
Summary of the content on the page No. 6
C. Contents 1. 1 x 8’’ LCD Monitor & DVD Player Combo 2. 1 x AC to DC Adapter 3. 1 x Remote Control with battery (CR2025) 4. 1 x Instruction Manual 5. 1 x Audio/Video Cable 6. 1 x Cigarette Lighter Adapter 7. 1 x Rechargeable Battery Figure 1 D. Powering and installation 1. Powering the system indoors (Refer to Figure 2) Plug one end of the AC to DC adapter into the DC 9V jack on the right side of the main unit, then plug the other end into the 120V AC power outlet. 2. Powering the system in a
Summary of the content on the page No. 7
E. Controls, Indicators, and Connectors 1. Unit View (Refer to Figure 3) Figure 3 1) LCD Panel Shut Off Switch 13) AV IN/OUT Switch 2) Wide Button 14) Audio Jack 3) Stop Button 15) Video Jack 4) Previous Button 16) Headphone Jack 5) Next Button 17) Volume Up/Down Control 6) Play Button 18) Brightness Up/Down Control 7) MENU Button 19) Power On/Off Switch 8) Up Button 20) Power LED 9) Right Button 21) Remote Control Sensor 10) OK Button 22) Open Button 11) Down Button 23) Charge LED 12) Left Bu
Summary of the content on the page No. 8
2. Remote Control View (Refer to Figure 4) 1) Display Button 2) Angle Button 3) Subtitle Button 4) Audio Button 5) Zoom Button 6) UP/DOWN/LEFT/RIGHT/ ENTER Buttons 7) Return Button 8) A-B Button 9) Forward Button 10) Reverse Button 11) Slow Button 12) Stop Button 13) Numeric Keypad 14) Setup Button 15) Menu Button 16) Repeat Button 17) SKIP- 18) SKIP+ 19) Play Button Figure 4 20) Pause Button F. Loading and Playing a Disc a. After connecting power to the unit, power on
Summary of the content on the page No. 9
G. Setup Press ‘ SETUP’ to display the Main screen of the Setup Menu on the screen. Press ‘ SETUP’ again to exit the Setup Menu and the unit will resume it’ s last playback mode. Main Setup Menu Screen 1) Press “ SETUP” , the ‘ General Setup Page’ will display on screen. a).Select ‘ TV Display’ using the UP/DOWN button, and then press RIGHT to enter the submenu. Select the TV display mode on the screen using UP/DOWN, and press ENTER to confirm the setting. Press LEFT to return. * Normal/PS: W
Summary of the content on the page No. 10
b).Select ‘ TV Type’ using the UP/DOWN button, and then press the RIGHT button to enter the submenu. Choose TV Type using the UP/ DOWN button and then press ENTER to confirm the setting. Press the LEFT button to return. TV Type Screen Display c).Select ‘ Angle Mark’ using the UP/DOWN buttton, and then press the RIGHT button to enter the submenu. Choose Angle Mark on or off using the UP/DOWN button and then press ENTER to confirm the setting. Press the LEFT button to return. Angle Mark Scr
Summary of the content on the page No. 11
d). Select ‘ Screen Saver’ using the UP/DOWN button, and then press the RIGHT button to enter the submenu. Choose Screen Saver on or off using the UP/DOWN button and then press ENTER to confirm the setting. Press the LEFT button to return. Screen Saver Screen Display *On: Enables screen saver *Off: Disables screen saver (off) *NOTE: The DVD player will enter the Screen Saver mode after ap- proximately five minutes if the same image remains on the screen. e). Select ‘ Last Memory’ by UP/DOWN bu
Summary of the content on the page No. 12
*On: The unit will return to the last position on the disc. *Off: The unit will not return to the last position on the disc. Note: The Last position memory function only effect for OPEN operation. 2) Select “ Video Quality Setup” by using the LEFT/RIGHT button, press ENTER to enter the video quality setup page. Video Quality Setup Screen Display a).Select ‘ Brightness’ by using the UP/DOWN button, then press EN- TER you can change the Brightness by pressing the LEFT/RIGHT button. To exit ‘
Summary of the content on the page No. 13
b).Select ‘ Contrast’ by using the UP/DOWN button, then press ENTER you can adjust the Contrast by pressing the LEFT/RIGHT button. Contrast Screen Display To exit ‘ Contrast’ Setting, press ENTER again to return the main Menu. c).Select ‘ Hue’ by using the UP/DOWN button, then press ENTER you can adjust the Hue by pressing the LEFT/RIGHT button. Hue Screen Display To exit ‘ Hue’ Setting, press ENTER again to return the main Menu. d).Select ‘ Saturation’ by using the UP/DOWN button, then press EN
Summary of the content on the page No. 14
3).Select “ Password” using the LEFT/RIGHT button, then press the RIGHT button to enter the submenu. Password Setup Page Screen Display Press ENTER to enter the Password Change Page. Input the Old Password or the Default Password, the New Password, and the Con- firmed New Password. Press ENTER to confirm the change. Password Change Page Screen Display Note: The default password is 3308. 11
Summary of the content on the page No. 15
4).With no disc inside the player select ‘ Preference Page’ using the LEFT / RIGHT buttons, then press ‘ ENTER’ to enter the preference page. a. Select ‘ Audio’ using the UP/DOWN button, then press RIGHT to enter the submenu. Select the audio language you desire using the UP/DOWN button, then press ENTER to confirm the setting. Press LEFT to return. Preference Audio Language b. Select ‘ Subtitle’ the using UP/DOWN button, then press RIGHT to enter the submenu. Select the desired subtitle lan
Summary of the content on the page No. 16
c. Select ‘ Disc Menu’ using the UP/DOWN button, then press RIGHT to enter the submenu. Select the Disc Menu Language you desire using the UP/DOWN button, then press ENTER to confirm the setting. Press LEFT to return. Preference Disc Menu Language Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, language is not available, the player will play and display on the screen the origi- nal recorded language contained
Summary of the content on the page No. 17
e. Select ‘ Default’ using the UP/DOWN button, then press RIGHT to en- ter the submenu. Press ENTER to make the setting return to the fac- tory-set mode. NOTE: The parental setting is not affected by the default reset function. Loading Factory Setting NOTE: The Default Password is 3308. This password is always ef- fective even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the passw
Summary of the content on the page No. 18
H. Basic Operation POWER Turn the unit on/off OPEN Remove/load the disc PLAY Start Play/Execute item or setting SLOW Play at 1/2, 1/4, 1/8 or 1/16 times speed PAUSE Still Picture STOP (1 time) Stop at the present playing point / (2 times) Stop playing NEXT Go to the next chapter, track or scene dur- ing play back PREVIOUS Go back to the previous chapter, track or scene during play back FORWARD Scan forward at 2, 4, 8,16 or 32 times speed REVERSE Scan backward at 2, 4, 8, 16 or 32 times speed LEF
Summary of the content on the page No. 19
I. Menu A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the menu. Some DVDs only allow you to select disc playback options using the DVD root menu. J. Display 1. PLAYING TIME AND REMAINING TIME a. During playback press the ‘ DISPLAY’ button to display the cur- rent Title Number (1), the total Number of Ti
Summary of the content on the page No. 20
c. Press ‘ DISPLAY’ a 3rd time to display the Elapsed Time for the chapter. The heading will disappear automatically in 3 seconds. Chapter Elapsed Time Screen Display d. Press ‘ DISPLAY’ a 4th time to display the Remaining Time for the chapter. The heading will disappear automatically in 3 seconds. Chapter Remaining Time Screen Display e. Press ‘ DISPLAY’ a 5th time to exit, ‘ Display Off’ will be displayed and will disappear automatically in 3 seconds. 2. ANGLE During playback of a disc, press
