Peerless Industries ACC-SB user manual

Summary of the content on the page No. 1

Installation and Assembly:
Speaker Bracket
Model: ACC-SB, ACC-SB-M
WALL ARM
(NOT INCLUDED)
AB
Parts List
Description Part #
Qty.
A hook on bracket 1 046-P1218
B speaker bracket 1 046-P1222
C extension bracket 1 046-P1221
D reinforcement bracket 1 046-P1220
E lock bracket 1 046-P1219
F M5 x 6 mm socket pin serrated washer head screw 8 510-1114
G 1/4-20 x 1/2" socket pin screw 2 520-1054
H 1/4-20 x 3/8" socket pin screw 2 520-1109
I 1/4" flat washer 2 540-9440
1
J 4 mm allen wrench 560-9646

Summary of the content on the page No. 2

Lay display face down on a nonabrasive surface. Use detail below to determine if extension bracket (C) is needed. 1 NOTE: Top of speaker must extend below the bottom of the screen. If extension bracket (C) is not needed skip to step 2 on page 3. If extension bracket (C) is needed skip to step 2 on page 5. HORIZONTAL BRACKET AND VERTICAL BRACKETS NOT SUPPLIED MAKE SURE THAT TOP OF SPEAKER IS FLUSH WITH BOTTOM OF DISPLAY C SPEAKER Use fi gures 1.1 and 1.2

Summary of the content on the page No. 3

Attaching Reinforcement Bracket and Speaker Bracket Attach reinforcement bracket (D) to adapter bracket Attach adapter bracket (A) to speaker bracket (B) 2 3 (A) using two M5 x 6 mm socket pin serrated using two M5 x 6 mm socket pin serrated washer washer head screws (F). head screws (F). F F B Attaching Speaker NOTE: Make sure that speaker wires are NOTE: Make sure that speaker wires are 4 4 connected as indicated in speaker instructions connected as indicated in speaker instructions be

Summary of the content on the page No. 4

Hook adapter bracket (A) onto wall arm (not included) and secure using lock bracket (E) and two 5 M5 x 6 mm socket pin serrated washer head screws (F) as shown in detail 1. WALL ARM (NOT INCLUDED) DETAIL 1 A E F F 4 of 5 ISSUED: 03-08-11 SHEET #: 125-9197-2 05-16-11

Summary of the content on the page No. 5

Attaching Speaker Using Extension Bracket NOTE: Make sure that speaker wires are Attach adapter bracket (A) to extension bracket 3 2 connected as indicated in speaker instructions (C) and speaker bracket (B) using two M5 x 6 mm before attaching speaker bracket (B). socket pin serrated washer head screws (F) as Secure speaker bracket (B) to speaker using two shown below. 1/4-20 socket pin screws (G or H), and two 1/4 fl at washers (I). F F B G or H I A B SPEAKER WIRES