Micro Technic MICRONIX PC/104 PV-5120 user manual

Summary of the content on the page No. 1

MICRONIX PC/104
POWER SUPPLY

PV-5120, 22 & 24
POWER SUPPLY MODULE WITH UPS
AND UP TO 3.84 MB SSD FLASH
PC/104-MODULES


User Manual
&
Installation Guide




VERS. 1.02









DOC: M5124DM.DOC
Micro Technic A-S • Denmark •
Tel. +45 6615 3000 • Fax +45 6615 3077
E-mail: support@micro-technic.com
Website: www.micro-technic.com

Summary of the content on the page No. 2

Users Manual & Installation Guide PV- series: Power supply module with UPS and SSD Flash Description Micronix PV-5124 is a PC/104 Power Supply with 1.76/3.84 MB Flash SSD which provides a convenient way to supply both power and solid state disk capacity to PC/104 bus products. The flash SSD emulates a standard FDD, a complete system can thus be built from just one Micronix PV-5124 and one PC/104 CPU. By connecting an external battery, an integrated UPS-funct

Summary of the content on the page No. 3

Users Manual & Installation Guide PV- SERIES: Power supply module with UPS and SSD Flash FEATURES AND SPECIFICATIONS Power Supply · Output power capability: 30W(max) · Input voltage: 8-30 VDC or 16-30 VDC using battery charger for 12V battery · Output voltage: +5V @5A (max) +12V @250mA(max) -12V @100mA(max) · Line regulation(+5V) 0.3% - @low line to high line; full load · Load regulation(+5V) 0.6% - @no load to full load; nominal input · Load regulation(+12V)

Summary of the content on the page No. 4

Users Manual & Installation Guide PV- series: Power supply module with UPS and SSD Flash MODEL SELECTION PV - 512XY-S Disk capacity 0=No SSD 2=1.76 MB 4=3.84 MB A = without UPS and battery charger S = Stack-through AVAILABLE MODELS Model no. Description/Type PV-5120-S PS with UPS, Stack-through PV-5122-S PS with UPS and 1.76 MB SSD, Stack-through PV-5124-S PS with UPS and 3.84 MB SSD, Stack-through P

Summary of the content on the page No. 5

Users Manual & Installation Guide PV- SERIES: Power supply module with UPS and SSD Flash INSTALLATION GUIDE PRECAUTIONS TO ESD Please note, that the Micronix PV modules must be handled with respect to ESD (Electrostatic Discharge). Electrostatic Discharge to the PV modules must be avoided. Before removing the module from the protection bag, the user must be discharged using a grounded wrist ribbon. SCHEMATIC OUTLINE Page 5 of 8

Summary of the content on the page No. 6

Users Manual & Installation Guide PV- series: Power supply module with UPS and SSD Flash I/O MAP AND MEMORY MAP I/O Map I/O port range used is 250h-257h. Be sure that no other hardware in the system makes use of this I/O range. Memory Map PV-5120 uses no memory range. PV-5122 & PV5124 uses memory range D0000h-D7FFFh. Be sure that no other hardware in the system makes use of this memory range. If your system BIOS set-up has ROM BIOS shadowing function

Summary of the content on the page No. 7

Users Manual & Installation Guide PV- SERIES: Power supply module with UPS and SSD Flash SCHEMATIC Page 7 of 8

Summary of the content on the page No. 8

Users Manual & Installation Guide PV- series: Power supply module with UPS and SSD Flash UPS TIMING Typical discharge/charge Short time dropout of mains Page 8 of 8