Panasonic MDDDT5540 user manual

User manual for the device Panasonic MDDDT5540

Device: Panasonic MDDDT5540
Category: Power Supply
Manufacturer: Panasonic
Size: 1.4 MB
Added : 9/26/2014
Number of pages: 133
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Panasonic MDDDT5540. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Panasonic MDDDT5540.

For your convenience

If looking through the Panasonic MDDDT5540 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Panasonic MDDDT5540 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Panasonic MDDDT5540 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Panasonic MDDDT5540 User manual - Online PDF
Advertisement
« Page 1 of 133 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Panasonic MDDDT5540 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Panasonic MDDDT5540. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

AC Servo Motor Driver
MINAS S-series
Operating Manual
Be sure give this instruction manual to the user.
• Thank you very much for your buying Panasonic AC Servo Motor Driver,A-series.
• Before use, read through this manual to ensure proper use. Keep this manual at an easily
accessible place so as to be referred anytime as necessary.

Summary of the content on the page No. 2

Table of Contents Before Use Safety Precautions •••••4 Parts Description •••••••••••12 Amplifier ••••••••••••••••••••••••••••••••••••• 12 Introduction •••••••••••••8 Motor ••••••••••••••••••••••••••••••••••••••••• 13 After Opening the Package•••••••••••••••• 8 Installation •••••••••••••••••14 Check the Model Number of Amplifier •••••••••••••••••• 8 Check the Model Number of Motor ••••••••••••••••••• 9 Amplifier ••••••••••••••••••••••••••••••••••••• 14 Check the Combination of Amplifier and Motor

Summary of the content on the page No. 3

Important Information Troubleshooting Protective Functions ••••••••••• 60 ••••••••••••••••••••••••••••••68 Maintenance and After-Sale Service Inspections ••••••••••• 6 6 •••••••••••••••••••••• Back cover Appendixes Conformance to EC Directives and UL Standards ••••••••••• App. 2 Details of Parameters ••••••••••••• App. 16 Holding Brake ••••••••••••••••••••••••• App. 6 Optional Parts ••••••••••••••••••••••• App. 38 Dynamic Brake•••••••••••••••••••••••• App. 8 Recommended Parts •••••••••••••• App.

Summary of the content on the page No. 4

(Important) Safety Precautions Observe the following precautions in order to avoid injuries of opera- tors and other persons, and mechanical damages. The following DANGER and CAUTION symbols are used according to the level of dangers possibly occur- ring if you fail to observe the instructions or precautions indicated. Indicates a potentially hazardous situation which, if not DANGER avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoi

Summary of the content on the page No. 5

Before Use DANGER Don't touch the rotating Don't subject the product to part of the motor in motion. water splash, corrosive gases, flammable gases and combustible things. Failure to observe this in- struction could result in Rotating part fire. Failure to observe this instruction could result in injuries. Do not expose the cables to Perform the transportation, sharp edges, excessive wiring and inspection at least 10 minutes after the pressing forces, heavy loads or pinching forces. powe

Summary of the content on the page No. 6

(Important) Safety Precautions Caution Use the motor and Execute the trial operations amplifier in the specified with the motor fixed but combination. without motor load connected. Connecting a load to the motor is possible only after successful trial operation. Failure to observe this in- Failure to observe this in- struction could result in in- struction could result in fire. juries. If an error occurs, Don't touch the motor, remove the causes for amplifier or its the error and secure the rege

Summary of the content on the page No. 7

Before Use Caution Don't hold the cables or After recovery from the motor shaft when power failure, the transporting the motor. equipment may restart suddenly. Don't approach the equipment Failure to observe this Failure to observe this instruction could result in instruction could result injuries. in injuries. *Provide appropriate settings as a preparedness against the accidental restart of the machine in order to ensure the safety of personnel. Don't block the heat Observe the voltage dissipa

Summary of the content on the page No. 8

Introduction After Opening the Package • Make sure that the product is what you have ordered. • Check whether the product has been damaged or not during transportation. If the product is not correct, or it has been damaged, contact dealer or sales agent. Check the Model of Amplifier Name plate AC SERVO DRIVER Number of pulses of the MUDS3A1A1A Model No. Model encoder(resolution) INPUT OUTPUT ENCODER Voltage 100-115V 32V 2500P/R Rated output current Pha

Summary of the content on the page No. 9

Before Use Check the Model of Motor Name plate Type CONT. TORQUE 0.64 Nm AC SERVO MOTOR RATING S1 Rated output Model No. MUMS042A1A INS. CLASS B (TÜV) A (UL) Serial No INPUT 3ØAC 92 V IP65 1.6 A CONNECTION Revolution rating RATED OUTPUT 0.2 kW SER No. 00010001 RATED FREQ. 200 Hz RATED REV. 3000 r/min MatsushitaElectric Industrial Co..Ltd. Made in Japan Model Designation 1~3 47 5~6 8910 11~12 Custom specification 2 Symbol Type Motor structure MUM Super low inertia (see Table 1-c) Custom

Summary of the content on the page No. 10

Introduction Check the Combination of Amplifier and Motor The amplifier has been designed for use in combination with the specified motors only. Check the specifications (Series symbol, output rating, voltage rating and encoder type) of the motor you want to use. -10-

Summary of the content on the page No. 11

Before Use With the incremental type encoder: 2500P/r Power Motor Amplifier supply for Amplifier Series Output Revolution Encoder type Voltage Motor type amplifier symbol rating rating type 1-phase, MUDS3A1A1A Type1 MUMS MUMS3AZ 30W **** 100V MUDS5A1A1A MUMS5AZ 50W Super **** MUDS011A1A MUMS011A 100V 100W Low **** MUDS021A1A Type2 MUMS021A 200W inertia **** MUDS041A1A Type3 MUMS041A 400W **** 1-phase, MUDS022A1A Type2 MUMS022A 200W **** 200V MUDS042A1A Type3 MUMS042A 400W Incremental **** 3-pha

Summary of the content on the page No. 12

CN MON Parts Description Amplifier Example: MUDS023A1A Example: MUDS042A1A (3-phase, 200V 200W: Type 1) (1-phase, 200V 400W: Type 3) Status LED STATUS MSDS Alarm code LED STATUS MSDS ALM CODE ALM CODE GAIN Communication GAIN connector CN SER CN Rotary switch SER CN SER for gain (GAIN) Main power Controller tuning input connector CN connection I/F CN (L1, L2, L3,P, B) I/F CN (CN I/F) CN POWER POWER Motor connection Encoder (U, V, W, E) CN connection CN SIG SIG (CN SIG) CN CN MOTOR MOTO

Summary of the content on the page No. 13

Before Use Motor Example: Super Low-Inertia Motor (MUMS Series, 400W) Encoder cable Motor cable Encoder Brake cable (Motor with electromag- Frame netic brake only ) Mounting bolt holes (4) Flange For detailed information for each of motor types, see the drawings in the Appendix (App.48 & 49). -13-

Summary of the content on the page No. 14

Installation The amplifier and motor should be properly installed to avoid failures, mechanical damages and injuries. Amplifier Location • Indoors, where the amplifier is not subjected to rain water and direct sun beams. Note that the amplifier is not a waterproof structure. • Avoid the place where the amplifier is subjected to corrosive gases, flammable gases, grinding liquids, oil mists, iron powders and cutting particles. • Place in a well-ventilated, and humid- and dust-free space. • Place

Summary of the content on the page No. 15

Before Use Mounting Direction and Space Requirements • Allow enough space to ensure enough cooling. • Install fans to provide a uniform distribution of temperature in the control box. 3 The airflow of fan is more than 0.43m /min. And it should be located 10 cm away from the amplifier. • Observe the environmental requirements for the control box, mentioned in the previous page. min. Fan Fan 100mm MSDS STATUS MSDS STATUS MSDS STATUS MSDS STATUS ALM CODE ALM CODE ALM CODE ALM CODE GAIN GAIN GAIN GA

Summary of the content on the page No. 16

Installation Motor Location • Indoors, where the amplifier is not subjected to rain water and direct sun beams. • Avoid the place where the amplifier is subjected to corrosive gases, flammable gases, grinding liquids, oil mists, iron powders and cutting particles. • Place in a well-ventilated, and humid- and dust-free space. • Easy maintenance, inspections and cleaning is also important. Environmental Conditions Item Conditions Ambient temperature 0 to 40˚C (free from freezing) Ambient humidit

Summary of the content on the page No. 17

Before Use Cable: Stress Relieving • Make sure that the cables are not subjected to moments or vertical loads due to external bending forces or self-weight at the cable outlets or connections. • In case the motor is movable, secure the cable (proper one supplied together with the motor) to a stationery part (e.g. floor), and it should be extended with an additional cable which should be housed in a cable bearer so that bending stresses can be minimized. • Make the bending radius of cables as la

Summary of the content on the page No. 18

System Configuration and Wiring General Wiring Diagram • Main Circuits Non-Fuse Breaker (NFB) Used to protect the power lines: overcurrent will shut off the circuit. Noise Filter (NF) Prevents the external noise from the power line, and reduces the effect of the noises gen- erated by the servo motor. Magnetic Contactor (MC) Turns on/off the main power of the servo motor. Used together with a surge absorber. Reactor (L) Reduces the harmonic current in the main power. Terminals P and B • In case

Summary of the content on the page No. 19

2 1 Preparations and Adjustments 0 9 Personal computer Communication STATUS control software ALM CODE PANATERM “ GAIN CN SER CN SER CN (to connect a PC or I/F CN controller) POWER CN I/F (to connect a controller) CN SIG CN CN SIG MOTOR (to connect an encoder) Encoder cable 1234 23 4 1 1234 Hazardous Voltage Others; Low Voltage circuit Motor cable Power supply for motor brake (24VDC) -19- 8 7 6 5 4 3

Summary of the content on the page No. 20

System Configuration and Wiring List of Available Components Amplifier Circuit Main circuit wire diameter Required Power Noise Magnetic contactor breaker (L1, L2, L3, Series Voltage Output (at the rated load) filter (contacts) (rated current) U, V, W, E) 30 ~ 50W Approx. 0.3kVA BK251 DVOP1441 BMFT61041N 1-phase, 100W Approx. 0.4kVA (5A) (3P+1a) 100V 200W Approx. 0.5kVA 400W Approx. 1.0kVA BK2101 DVOP1442 BMFT61541N 2 (10A) (3P+1a) 0.75mm 2 *1-phase, 30 ~ 50W Approx. 0.3kVA BK351 DVOP1441 BMFT61


Alternative user manuals
# User manual Category Download
1 Panasonic Aluminum Electrolytic Capacitors NHG User manual Power Supply 2
2 Panasonic AC Servo MINAS E Series IMC80A User manual Power Supply 18
3 Panasonic AM-2PI User manual Power Supply 0
4 Panasonic AM-4PI User manual Power Supply 0
5 Panasonic ESD Suppressor EZAEG2A User manual Power Supply 5
6 Panasonic CGR18650AF User manual Power Supply 44
7 Panasonic AW-IF400G User manual Power Supply 1
8 Panasonic LC-XC1238AP User manual Power Supply 3
9 Panasonic ESD Suppressor EZAEG3A User manual Power Supply 0
10 Panasonic LC-P0612P User manual Power Supply 0
11 Panasonic HHR160A User manual Power Supply 0
12 Panasonic HHR370AH User manual Power Supply 1
13 Panasonic KW4S User manual Power Supply 3
14 Panasonic MDDDT5540P User manual Power Supply 3
15 Panasonic Minas A4 Series User manual Power Supply 116
16 Sony AC U50A User manual Power Supply 5
17 Sony AC LS1 User manual Power Supply 2
18 Sony NP-FM30 User manual Power Supply 35
19 Sony NP FX101 User manual Power Supply 1
20 Sony NH-AAA-DA User manual Power Supply 2