Summary of the content on the page No. 1
Olivetti d-Color
P20W/P26W/P26
NETWORK USER’S GUIDE
Summary of the content on the page No. 2
PREFACE Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacuter assumes no responsibility for the results of errors beyond its control, and also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorseme
Summary of the content on the page No. 3
CONTENTS Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Notes, cautions and warnings. . . . . . . . . . . . . . . . . 5 Network Configuration . . . . . . . . . . . . . . . . . . . . . . 6 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Self-diagnostic test. . . . . . . . . . . . . . . . . . . . . . . . 7 Configuration utilities . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . 58 Novell Netware IPX. . . . . . . . . . . . . . . . . . . . . . . 60 NetBEUI Protocol . . . . . . . . . . . . . . . . . . . . . . . . 60 Network Printer Settings. . . . . . . . . . . . . . . . . 61 Windows 2000. . . . . . . . . . . . . . . . . . . . . . . . 61 Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . 62 Printer driver configuration . . . . . . . . . . . . . . . . . 62 Novell NetWare. . . . . . . . . . . . . . . . .
Summary of the content on the page No. 5
NetWare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Printer cannot find the network interface . . . . . 88 The network interface is identified by the setup utility but not by the NetWare server . . . . . . . 89 Remote Server mode . . . . . . . . . . . . . . . . . . . 89 Print Server mode . . . . . . . . . . . . . . . . . . . . . 89 Printer does not print. . . . . . . . . . . . . . . . . . . 89 PostScript error occurs if a banner page is printed90 EtherTalk . . . . . . . . . .
Summary of the content on the page No. 6
NETWORK CONFIGURATION INTRODUCTION Your printer incorporates a fast 100BASE-TX/10BASE-T network interface. This User’s Guide explains the functionality of the built in network interface. Access for interconnection and producing self-diagnostic test and configuration printouts is provided via an interface panel at the rear of the printer. This network interface supports IEEE802.2, IEEE802.3, Ethernet- II and SNAP, and can detect those frame types automatically. Also, the interface supports ma
Summary of the content on the page No. 7
SPECIFICATION Frame Types IEEE 802.2 IEEE 802.3 Ethernet-II, SNAP, AUTO Network Interface 100BASE-TX 10BASE-T Network Protocols TCP/IP Network layer ARP, RARP, IP, ICMP Session layer TCP, UDP Application layerLPR, FTP, TELNET, HTTP, IPP, BOOTP, DHCP, SNMP, DNS, SMTP, POP3, SLP, Rendezvous IPX/SPX (NetWare) Remote printer mode (up to eight file servers and 32 queues) Print server mode over IPX/SPX (up to eight print servers) Encrypted password supported in print server mode SNMP EtherTalk E
Summary of the content on the page No. 8
On the first page of the Network Information that is printed out, under the heading “General Information” the MAC Address is given. For example: MAC Address 00808784E3F1 The Ethernet address is therefore: 00:80:87:84:E3:F1 CONFIGURATION UTILITIES You can configure the network interface (NIC) by using one of the following methods: UTILITY FEATURES SYSTEM REQUIREMENTS Quick Setup Configure the NIC easily Windows 2000/XP and simply without (TCP/IP protocol or IPX/ installing any software SPX p
Summary of the content on the page No. 9
UTILITY FEATURES SYSTEM REQUIREMENTS Telnet Configure the NIC using Third-party vendor TELNET. developed TELNET client package. A TELNET Application is standard in Windows/ UNIX/Linux. SNMP The printer and network Third-party vendor card can be controlled developed SNMP using third-party application. vendor developed SNMP application. USING QUICK SETUP Quick Setup utility allows you to configure the network interface easily and simply without installing any software packages. You can co
Summary of the content on the page No. 10
1. Insert the Network Software CD-ROM into the CD-ROM drive. The Setup Utility starts automatically. If it does not start, double-click \setup.exe (in the root directory) on the CD-ROM. 2. Select [Network Card Setup]—[Network Card Quick Setup]. 3. Select the appropriate language and follow the on-screen instructions. 4. When the settings are correct, click [Execute]. The new settings are transmitted to the network card but it still operates with pre-transmission settings. 5. Click [Finish
Summary of the content on the page No. 11
USING ADMINMANAGER AdminManager is a powerful Microsoft Windows-based utility to configure all network interface functions easily and intuitively via a graphical user interface. Configuration requires a PC with Windows 2000 Advanced Server/Professional or Windows XP running TCP/IP or IPX/SPX (NetWare). This utility can only be used on a PC that can be connected to the network with TCP/IP or IPX/SPX and must be used on a PC that is located on the same segment as the printer. To create a Ne
Summary of the content on the page No. 12
INTERFACE Select [Start]-[Programs]-[Oki Setup Utility]-[Admin Manager]. MENU ITEM FUNCTION File Search Search printers in your network. Status Printer Current printer Status status is displayed: System Displays current Status configuration. Configuration data can be saved as log file. NetMeter Display current network status. For further information, see on-line help file of NetMeter. List of Displays current Configuration configuration. Items Configuration data can be saved as log fi
Summary of the content on the page No. 13
MENU ITEM FUNCTION Setup Device Setup Configure the network interface. Setup by Launch the default browser in your HTTP environment to access the selected printer’s web page. Setup by Launch TELNET application in your TELNET environment to access the selected printer’s TELNET port. Note:The TELNET application is not included as part of the NIC package. Install the TELNET package on to your system. For further information, see your Windows manual. Setup Create Create a NetWare queue. NetW
Summary of the content on the page No. 14
The following section explains each tab’s functionality. Depending on your printer, some items in the following explanation may not be displayed. General Tab This allows you to set or change the root password used for Admin Manager, TELNET and FTP. ITEM EXPLANATION Change root You can set/change the password root password for AdminManager, TELNET and FTP. TCP/IP Tab This allows you to configure TCP/IP related items. ITEM EXPLANATION Use TCP/IP Set TCP/IP protocol as enabled/disabled. Prot
Summary of the content on the page No. 15
ITEM EXPLANATION Default Set the default gateway of the selected network Gateway interface card. Use FTP/LPD Check this item if you want to add the FTP/LPD Banner banner. Otherwise uncheck. DNS Server… Set IP addresses for DNS primary and secondary servers. Network PnP Configure items related to Network PnP. Setup… In this dialogue box, the following items can be configured: Auto IP address Set to get IP address dynamically by Auto IP, enabled or disabled Use Network PnP Set notifying use
Summary of the content on the page No. 16
ITEM EXPLANATION Operation Set NetWare mode. Mode Check box Check if you want to use the Bindery mode and beside Bindery Setup button becomes available. If it is Bindery unchecked, the button is greyed out. Setup Bindery Configure items related to Setup Bindery mode. In this dialogue box, the following items can be configured: Available File Server Select file servers to and Selected File connect. Up to eight file Server. servers can be selected. Select a server from [Available file ser
Summary of the content on the page No. 17
ITEM EXPLANATION RPRINTER Available if you select Setup RPRINTER mode in Operation Mode. By selecting the [RPRINTER] button, this is displayed: NDS or Bindery Show the Available print server tree in NDS mode or Bindery mode. Available print server Select file servers to and Selected print connect. Up to eight file server servers can be selected. Select a server from [Available file server] list and click >> button. The server is copied to [Selected file server] box. Time Out Set dura
Summary of the content on the page No. 18
EtherTalk Tab This allows you to configure EtherTalk related items. ITEM EXPLANATION Use Set EtherTalk EtherTalk protocol to enabled/ Protocol disabled. Printer Name Set EtherTalk Printer object name. Zone Name Set the zone name to which the printer belongs. NetBEUI Tab This allows you to configure NetBEUI related items. ITEM EXPLANATION Use NetBEUI Set NetBEUI protocol to enabled/disabled. Protocol Computer Set a computer name for the printer. Name Workgroup Set a work group name to which the
Summary of the content on the page No. 19
SMTP Tab This allows you to configure SNMP related items. ITEM EXPLANATION Authentic This community name Community is used to check whether incoming SNMP requests have the correct community name or not. The community name is displayed as ****** for security reasons. TRAP This community name is assigned to outgoing system Community traps such as cold start, authentication failure, etc. TRAP Set a destination IP address of a Trap packet. If Address 0.0.0.0 is set, the Trap is disabled. S
Summary of the content on the page No. 20
ITEM EXPLANATION Printer Trap By selecting the button, the Setup… following dialogue box is displayed: In the dialogue box, the following items can be configured: Printer Trap This community name is assigned Community to outgoing printer status traps Name such as off-line, paper out, etc. TCP#1–5 Set the IP addresses to which a Trap packet will be sent. You can set up to five IP addresses. Network Configuration> 20
