Summary of the content on the page No. 1
1
English
Table of Contents
Usage Notice
Precautions .......................................................................................... 2
Introduction
Product Features .................................................................................. 3
Package Overview ............................................................................... 4
Product Overview ................................................................................. 5
Installation
Connecting the Projector t
Summary of the content on the page No. 2
2 English Usage Notice Warning- Do not look into the lens. The bright light may hurt your eyes. Warning- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock. Warning- When changing the lamp, please allow unit to cool down, and follow all changing instructions. Warning- This product will detect the life of the lamp itself. Please be sure to change the lamp when it sh
Summary of the content on the page No. 3
3 English Introduction Product Features This product, is an XGA single chip 0.9” DLP Projector. The outstanding features of it are listed as follows: True XGA, 1024 x 768 addressable pixels 5 lbs (2.3 kgs) lightweight compact design Single chip DLP technology SXGA compression and VGA, SVGA re-sizing 150 Watts user replaceable P-VIP lamp Mac/ NEC PC-98/ FM Towns compatible NTSC/ NTSC4.43/ PAL/ PAL-M / PAL-N/ SECAM compatible Full function wireless remote controller Real plug &
Summary of the content on the page No. 4
4 English Package Overview This projection display comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projection Display Power Cord VGA Cable S-Video Cable Audio-In Cable for Computer Composite Video Cable Audio Cable User’s Manual Warranty Card Remote Receiver Cable Remote Control Carrying Case
Summary of the content on the page No. 5
5 English Product Overview Main Unit Panel Control Zoom Ring Remote Control Focus Ring Receiver Lens Speaker Carrying Handle Connection Ports Elevator Button Power Connector Elevator Foot Power Switch Security Lock Slot
Summary of the content on the page No. 6
6 English Connection Ports Computer Input Connector Composite Video Audio Iuput Connector Connector S-video Audio Output Connector Connector Power Connector Power Switch Panel Control Four Directional Select Keys Menu Power / Standby Reset Temperature Source Lamp Enter
Summary of the content on the page No. 7
7 English Remote Control Power / Standby Source Laser Point Mouse Ball Right Mouse Button Left Mouse Button Zoom In Zoom Out Mute Volume ( + / - ) Menu Picture in Picture Enter Four Directional Select Keys Freeze Reset Keystone Correction Resync Caution: To reduce the risk of injury to the eyes, do not look directly into the laser light on the remote control and do not point the laser light into anyone’s eyes. This remote control is equipped with a Class IIIA laser that reduces radiation.
Summary of the content on the page No. 8
8 English Laser Point 1. Dual functions of a laser pen and remote control. 2. The laser pilot light can be used in presetation. 3. The laser pointer is clearly visible under ordinary light and can penetrate glass. 4. The laser pointer has an effective distance of 300M. 5. Applicable to training, speech, merchandise display, presentation, auto repair, etc Caution: To reduce the risk of injury to the eyes, do not look directly into the laser light on the remote control and do not point the laser
Summary of the content on the page No. 9
9 English Installation Connecting the Projector to Desktop Computer 1. Make sure the projector and your computer are turned off. 2. Connect one end of the projector signal cable to the projector; connect the other end to the VGA connector on the computer and tighten the screws. 3. Connect one end of the power cord into the back of projector; connect the other end to an electrical outlet. 4. The adapter of remote receiver is connected to RS232C socket at the back of the computer. RS232C Computer
Summary of the content on the page No. 10
10 English Connecting the Projector to Portable Computer 1. Make sure the projector and your notebook are turned off. 2. Connect one end of the projector signal cable to the projector; connect the other end to the VGA connector on the notebook and tighten the screws. 3. Connect one end of the power cord into the back of projector; connect the other end to an electrical outlet. 4. The adapter of remote receiver is connected to RS232C socket at the back of the computer. RS232C Notebook Output VGA
Summary of the content on the page No. 11
11 English Connecting the Projector to Other Video Sources If your video player uses a round, one-prong composite video connector, you’ll need the video cable. If your video player uses a round, four-prong s-video connector, you’ll need the s-video cable ( See page 12 for detail information). Both cables are shipped with the projector. If you use the video cable: 1. Plug the video cable connector into the “Video out”port on your video player; plug the other end into the “Video”port on your pro
Summary of the content on the page No. 12
12 English If you use the s-video cable: 1. Plug the s-video cable connector into the “S-Video”port on your video player; plug the other end into the “S-Video” port on your projector. 2. Plug the audio cable white connector into the left “Audio out” port on your video player; plug the cable’s red connector into the right “Audio out” port on the video player; plug the other end into the “Audio in” port on your projector. 3. If you need to use an external speaker (built in amplifier), plug the aud
Summary of the content on the page No. 13
13 English Power On/Off the Projection Display Powering On the Projection Display 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. 3. Turn on the main power switch on the back of the projector and allow the projector to warm up for 1-2 minutes. 4. Turn on the lamp by pressing “Power/Standby” button on the Panel Control. The startup screen will display for 30 seconds and the Power/Standby indicator will light solid green. 5. Turn on your
Summary of the content on the page No. 14
14 English Powering Off the Projection Display 1. Press the “Power/Standby” button to turn off the projector lamp. 2. After pressing the “Power/Standby” button, you will see a message “ Power off the lamp? ” on the on-screen display. Press the “Power/Standby” button again to confirm. Otherwise the message will disappear after 5 seconds. 3. “LAMP “ LED indicator will flash amber for about one minute. After the “LAMP” LED indicator stops flashing , you can turn off the main power switch
Summary of the content on the page No. 15
15 English Adjusting the Projected Image Adjusting the Projector Height The projector is equipped with an elevator foot for adjusting the projector height. To raise the projector: 1. Press and hold the elevator button . 2. Raise the projector to the desired display angle , then release the button to lock the elevator foot into position. To lower the projector: 1. Press and hold the elevator button. 2. Lower down the projector, then release the button to lock the elevator foot into po
Summary of the content on the page No. 16
16 English Adjusting the Projector Focus You may adjust zoom ring to zoom in / out. Rotate the room ring counter-clockwise to zoom in and clockwise to zoom out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.3 feet to 32.8 feet (1m to 10m). Zoom Ring Focus Ring Image Size Adjustment Max. 28" 112" 141" 197" 225" 273" Screen Min. 21" 84" 105" 147" 168" 210" 3.3’ 13.1’ 16.4’ 23.0’ 26.2’ 32.8’ Distance inch 21"
Summary of the content on the page No. 17
17 English User Controls There are two ways for you to control the functions: Remote Control and Panel Control. Panel Control Remote Control Power / Standby Power the lamp on and off when the main power switch is turned on. Laser Point Activates laser pointer for use in presentations. Mouse Ball Controls the on-screen cursor and alternate left-mouse function. Calibrates the mouse ball for pointing performance. Left Mouse Button Controls left mouse functions Mute Silences the speaker
Summary of the content on the page No. 18
18 English Menu Press “Menu” to open the on-screen display (OSD) menus and to switch among different menus. To exit OSD, press the “Freeze/CLR” button or select the “ Exit Menu” icon and press “Enter” button. The projector saves any changes you made automatically. Enter Press “Enter” to confirm your selection. Freeze Press the “Freeze” button to still the screen image. When the OSD is displayed, press the “Freeze” button to exit the OSD. Keystone Adjusts image distortion caused by tilti
Summary of the content on the page No. 19
19 English OSD Menus How to operate The Projector has a multilingual On-Screen Display(OSD) menu that allows you to make image adjustments and change a variety of settings. In computer source, the OSD will be the “Computer OSD”. In video source, the OSD will be the “ Video OSD”. The projector will detect the source automatically. To open the OSD menu, press the “menu” button on the Remote Control or Panel Control. To select among different menus, press the” Menu” button again. Then use
Summary of the content on the page No. 20
20 English Tint (Video mode only) The tint adjusts the red-green color balance in the projected image. Press the left key to increase the amount of green in the image. Press the right key to increase the amount of red in the image. Color (Video mode only) The color setting adjusts a video image from black and white to fully saturated color. Press the left key to decrease the amount of color in the image. Press the right key to increase the amount of color in the image. Image (Compu
