Summary of the content on the page No. 1
Liquid Crystal Projector
CP-X880W / CP-X885W
USER'S MANUAL, Vol. 1
Please read this user's manual thoroughly to ensure correct usage through understanding.
ENGLISH
Summary of the content on the page No. 2
LCD Projector CP-X880/CP-X885 USER'S MANUAL Vol.1 (Basic) USER'S MANUAL Thank you for purchasing this projector. WARNING • Please read the accompanying manual “SAFETY INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE • The information in this manual is subject to change without notice. • The manufacturer assumes no responsibility for any errors that may appear
Summary of the content on the page No. 3
This liquid crystal projector is used to project PROJECTOR various computer signals as well as NTSC / PAL / FEATURES SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized. Ultra High Brightness One Touch Function Crisp, ultra-bright presentations is achieved Just press the ONE TOUCH button to by using a UHB (ultra high brightness) lamp automatically retrieve input signals, calibrate and a highly efficient optical system images, a
Summary of the content on the page No. 4
WARNING Precautions to observe in regards to the power cord: Please use extra caution when connecting the projector's power cord as incorrect or faulty connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the following safety guidelines to insure safe operation of the projector: • Only plug the power cord into outlets rated for use with the power cord's specified voltage range. • Only use the power cord that came with the projector. • NEVER ATTEMPT TO DEFEAT THE GROUND CONNEC
Summary of the content on the page No. 5
THE PROJECTOR Indicates the PART NAMES corresponding reference page KEYSTONE button INPUT dial ONE TOUCH button RGB indicator RESET button BNC indicator INPUT FOCUS button RGB KEYSTONE DVI indicator BNC ONE TOUCH ZOOM button DVI VIDEO indicator FOCUS ZOOM VIDEO RESET MENU button S-VIDEO indicator S-VIDEO MENU COMPONENT Vol.2 LAMP indicator COMPONENT indicator STANDBY/ON TENP LANP STANDBY/ON button Vol.2 TEMP indicator Control Panel Elevator screw Elevator feet Lens cap Air fil
Summary of the content on the page No. 6
THE REMOTE CONTROL LASER INDICATOR RGB button VIDEO button ZOOM buttons LASER INDICATOR STANDBY/ON VIDEO RGB STANDBY/ON button PAGE buttons UP FOCUS buttons FOCUS ZOOM PAGE DOWN BLANK LASER LASER button BLANK button Right mouse button Disk pad Right mouse click Mouse cursor movement ASPECT Left mouse click Lever switch (*) ASPECT button PUSH RESET button ENTER Left /Right ESC MENU RESET Key buttons AUTO button POSITION AUTO PinP ESC button
Summary of the content on the page No. 7
SETTING UP THE PROJECTOR CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual “SAFETY INSTRUCTIONS” and this manual. • If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet. Adjusting th
Summary of the content on the page No. 8
Adjusting the Screen Size and Projection Distance Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen a:Distance from the projector to the screen (±10%) b:Distance from the lens center to the bottom of the screen (±10%) c:Distance from the lens center to the top of the screen (±10%) The screen Top view If 4:3 aspect ratio 4 3 a [inch (m)] b c Screen Size [inch (m)] [inch (cm)] [inch
Summary of the content on the page No. 9
CONNECTING YOUR DEVICES Devices You Can Connect to the Projector (Refer to this section for planning your device configuration to use for your presentation.) CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”. ATTENTION Precautions to observe when connecting other devices to the projector • Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each device to be conn
Summary of the content on the page No. 10
Ports and Cables Refer to the table below to find out which projector port and cable to use for connecting a given device. Use this table for determining which cables to prepare. Function Projector Port Connection Cables RGB cable RGB (With D-sub 15-pin shrink jack and inch thread screws) Analog RGB input BNC(R/C /P )(G/Y)(B/C /P )(H)(V) R R B B BNC cable • When BNC (RGB) is selected (*) RGB cable Analog output RGB OUT (With D-sub 15-pin shrink jack and inch thread screws) DVI input DVI DVI cabl
Summary of the content on the page No. 11
USB OUT AUDIO cable (Stereo mini) AUDIO OUT MOUSE cable CONTROL OUT Analogue RGB OUT RGB cable AUDIO cable (Stereo mini) AUDIO OUT Analogue RGB OUT RGB cable CONNECTING YOUR DEVICES (continued) Connecting to a Computer ATTENTION Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual
Summary of the content on the page No. 12
AUDIO cable (Stereo mini) AUDIO OUT DVI cable DVI OUT AUDIO cable (Stereo mini) AUDIO OUT BNC cable BNC OUT Connecting to a Computer (continued) BNC Input DVI Input REMOTE REMOTE CONTROL CONTROL DVI CR/PR Ca/Pa Y COMPONENT VIIDEO DVI CR/PR Ca/Pa Y COMPONENT VIIDEO RGB RGB OUT CONTROL RGB RGB OUT CONTROL R-AUDIO IN-L VIDEO IN S-VIDEO IN R-AUDIO IN-L VIDEO IN S-VIDEO IN R/CR/PR G/Y B/Ca/Pa H V 12 R/CR/PR G/Y B/Ca/Pa H V 12 BNC AUDIO IN AUDIO OUT USB BNC AUDIO IN AUDIO OUT USB
Summary of the content on the page No. 13
AUDIO/VIDEO cable S-VIDEO OUT AUDIO/VIDEO OUT RGB cable AUDIO/VIDEO cable COMPONENT OUT COMPONENT VIDEO cable CONNECTING YOUR DEVICES (continued) Connecting to a DVD Player Connecting to a VCR REMOTE REMOTE CONTROL CONTROL DVI CR/PR Ca/Pa Y COMPONENT VIIDEO DVI CR/PR Y COMPONENT VIIDEO Ca/Pa RGB RGB OUT CONTROL RGB RGB OUT CONTROL R-AUDIO IN-L VIDEO IN S-VIDEO IN R-AUDIO IN-L VIDEO IN S-VIDEO IN R/CR/PR G/Y B/Ca/Pa H V 12 R/CR/PR G/Y B/Ca/Pa H V 12 BNC AUDIO IN AUDIO OUT
Summary of the content on the page No. 14
USING THE REMOTE CONTROL Putting batteries into the remote control unit CAUTION Precautions to observe in regards to the batteries Always handle the batteries with care and use them only as directed. Improper use may result in battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment. • Keep the battery away from children and pets. • Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with use
Summary of the content on the page No. 15
USING THE REMOTE CONTROL (continued) Operating the remote control WARNING • The laser pointer of the remote control transmitter is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems. CAUTION • Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • The remote control works with both the projector's fron
Summary of the content on the page No. 16
TURNING ON THE POWER Precautions Connect all devices to be used to the projector prior to turning on the power. WARNING When the power is ON, a strong light is emitted. Do not look into the lens. Make sure that the power cord is firmly and LASER INDICATOR 1 correctly connected to the projector and outlet STANDBY/ON VIDEO RGB UP FOCUS ZOOM PAGE DOWN Turn on the projector's power BLANK LASER 2 Set the power switch to [ | ] (ON). The STANDBY/ON indicator will light to solid orange. power switc
Summary of the content on the page No. 17
TURNING ON THE POWER (continued) Selecting an Input Signal Using the remote control Using the projector's control panel 5 If selecting RGB input Turn the INPUT dial INPUT Press the RGB button Turning the dial cycles GB Press this button to toggle between the devices through the inputs as connected to RGB IN 1 and 2. As illustrated shown below. Select the below, each time you press the RGB button, the terminal to which the signal projector switches between RGB IN 1 and 2. you want to project is i
Summary of the content on the page No. 18
TURNING OFF THE POWER Press the STANDBY/ON button (control LASER 1 INDICATOR panel or remote control) STANDBY/ON VIDEO RGB The message "Power off?" will appear on the screen for STANDBY/ON approximately 5 seconds. UP FOCUS ZOOM PAGE DOWN BLANK LASER Press the STANDBY/ON button again 2 (control panel or remote control) Press the STANDBY/ON button again while the "Power off?" ASPECT message is visible. The projector lamp goes off and starts cooling down. While cooling, the STANDBY/ON indicator fl
Summary of the content on the page No. 19
ADJUSTING THE VOLUME VOLUME Press the VOLUME button LASER 1 INDICATOR As illustrated on the right, a dialog will VIDEO RGB STANDBY/ON appear on the screen to aid you in adjusting the volume. UP VOLUME FOCUS ZOOM PAGE DOWN BLANK LASER 16 2 Use the lever switch / to adjust the ASPECT volume Press the VOLUME button again to close the dialog and complete this operation. (Even if you don't do anything, the PUSH ENTER dialog will automatically disappear after a few seconds.) ESC MENU RESET POSITION A
Summary of the content on the page No. 20
ADJUSTING THE POSITION Press the POSITION button LASER INDICATOR 1 As illustrated on the right, a dialog will appear on the screen to STANDBY/ON VIDEO RGB aid you in adjusting the position. UP FOCUS ZOOM PAGE DOWN BLANK LASER POSITION POSITION ASPECT 2 Use the , , , buttons to adjust the PUSH ENTER position ESC MENU RESET When you want to initialize the position, press the RESET POSITION AUTO PinP button during adjustment. MAGNIFY VOLUME ON Press the POSITION button again to close the dialog and
