Summary of the content on the page No. 1
LSQT1091_ENG.book 1 ページ ２００６年１１月２７日 月曜日 午後１時１７分
Operating Instructions
Digital Video Camcorder
Model No. PV-GS320
Before connecting, operating or adjusting this product,
please read the instructions completely.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
Mini
For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or vi
Summary of the content on the page No. 2
LSQT1091_ENG.book 2 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Things You Should Know Date of Purchase Thank you for choosing Panasonic! Dealer Purchased From You have purchased one of the most sophisticated and reliable products on the Dealer Address market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the Dealer Phone No. right. The serial number is on the tag located on the Model No. underside of your Camc
Summary of the content on the page No. 3
LSQT1091_ENG.book 3 ページ ２００６年１１月２７日 月曜日 午後１時１７分 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, ma
Summary of the content on the page No. 4
LSQT1091_ENG.book 4 ページ ２００６年１１月２７日 月曜日 午後１時１７分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block
Summary of the content on the page No. 5
LSQT1091_ENG.book 5 ページ ２００６年１１月２７日 月曜日 午後１時１７分 ≥DO NOT LEAVE YOUR CAMCORDER OR Precautions THE POWER SUPPLY TURNED ON WHEN USE & LOCATION NOT IN USE. ≥STORAGE OF YOUR CAMCORDER ... Store WARNING and handle your Camcorder in a manner that ≥TO AVOID SHOCK HAZARD ... Your will not subject it to unnecessary movement Camcorder and power supply should not be (avoid shaking and striking). Your Camcorder exposed to rain or moisture. Do not connect the contains a sensitive pick-up device whic
Summary of the content on the page No. 6
LSQT1091_ENG.book 6 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Warning Risk of fire, explosion and burns. Do not disassemble. Do not heat the batteries above the following temperatures or incinerate. Button-type battery 60 oC (140 oF) Battery pack 60 oC (140 oF) AC adaptor This AC adaptor operates on AC between 110V and 240 V. But ≥In the U.S.A. and Canada, the AC adaptor must be connected to a 120V AC power supply only. ≥When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor t
Summary of the content on the page No. 7
LSQT1091_ENG.book 7 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before opening the CD-ROM package, please read the following. End User License Agreement (for USB Driver, Quick Movie Magic and MotionDV STUDIO) You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsus
Summary of the content on the page No. 8
LSQT1091_ENG.book 8 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Contents Before using Record mode Quick Guide................................................... 10 Check before recording ................................. 28 Accessories ................................................... 12 Recording on a tape ...................................... 29 Parts identification and handling.................... 12 Recording check............................................ 30 Attaching the lens cap ..................
Summary of the content on the page No. 9
LSQT1091_ENG.book 9 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Playback mode Menu Playing back tape .......................................... 42 Menu list ........................................................ 63 Slow-motion playback/ Menus related to taking pictures ................... 65 frame-by-frame playback ............................ 43 Menus related to playback ............................ 65 Variable-speed search function ..................... 43 Other menus......................................
Summary of the content on the page No. 10
LSQT1091_ENG.book 10 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using 3 Push the [PUSH] mark 1 in order to close Quick Guide the cassette holder. ª Charging the battery 1 Connect the AC cable to the AC adaptor and the AC jack. 1 2 Put the battery on the battery mount by aligning the mark and then securely plug it PUSH in. 4 Only after the cassette holder is completely housed, close the cassette cover. ª Inserting/removing a card 1 Open the card slot cover. ª Attaching the battery Push the battery
Summary of the content on the page No. 11
LSQT1091_ENG.book 11 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using 1 Press the Photoshot button [ ]. ª How to turn off the power 1 While pressing the button 1, set the [OFF/ ON] switch to [OFF]. 1 ª Recording on a tape ª Playing back tape ≥Set to Tape Recording Mode. ≥Set to Tape Playback Mode. 1 Press the recording start/stop button to 1 Operate with joystick. start recording. 1/;: Playback/Pause 6: Rewind/Review playback (Reverts to playback with the 1/; icon.) 5: Fast forward/Cue playback (Re
Summary of the content on the page No. 12
LSQT1091_ENG.book 12 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using Before using Parts identification and handling Accessories ª Camcorder The following are the accessories supplied with this product. 1) (1) (3) PV-DAC14D K2GJ2DC00011 K2CA2CA00029 2) 3) (2) (4) CR2025 CGR-DU06 N2QAEC000021 5) 4) (1) White balance sensor -40- Remote control sensor -27- (2) Grip belt -14- (3) Lens (LEICA DICOMAR) K2KZ9CB00001 VFF0304 K1HA05CD0010 ≥LEICA is a registered trademark of Leica 1) AC adaptor, DC cable, AC
Summary of the content on the page No. 13
LSQT1091_ENG.book 13 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using (14) (15) (16) (8) (20) (22) (17) (21) (18) (9) (19) (10) (11) (12) (23) (24) (25) (13) (20) LCD monitor -18-, -75- (8) Viewfinder -18-, -75- Due to limitations in LCD production Due to limitations in LCD production technology, there may be some tiny bright or technology, there may be some tiny bright or dark spots on the LCD monitor screen. dark spots on the Viewfinder screen. However, this is not a malfunction and does Ho
Summary of the content on the page No. 14
LSQT1091_ENG.book 14 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using ≥When you remove the lens cap, press the knobs firmly. How to remove the Sensor tag (for U.S.A. only) (32) 1 Flip the grip belt. (32) Tripod receptacle This is a hole for attaching the Camcorder to optional tripod. (Please carefully read the operating instructions for how to attach the tripod to the Camcorder.) ≥You cannot open the card slot cover when the tripod is used. Insert the card first and then attach the tripod. 2 Re
Summary of the content on the page No. 15
LSQT1091_ENG.book 15 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using ª Connecting to the AC outlet Power supply ª Charging the battery When this product is purchased, the battery is not charged. Charge the battery before using this product. ≥Battery charging time. (-16-) ≥We recommend using Panasonic batteries. (-12-, -79-) ≥If you use other batteries, we cannot guarantee the quality of this product. ≥If the DC cable is connected to the AC adaptor, then the battery will not get charged. Remove
Summary of the content on the page No. 16
LSQT1091_ENG.book 16 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using ≥Hold the battery with your hand so it does not ≥When you use this Camcorder with the LCD fall. monitor lit up with the [POWER LCD] setting. ≥Before removing the battery, be sure to set the ≥The batteries heat up after use or charging. The [OFF/ON] switch to [OFF]. main unit of the Camcorder being used will also heat up. This is normal. Charging time and recordable time ≥Along with the reduction of the battery capacity, the disp
Summary of the content on the page No. 17
LSQT1091_ENG.book 17 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using ª How to turn the power on and off with Setting date and time the LCD monitor/viewfinder When the Camcorder is turned on for the first When the power switch is set to [ON], the power time, [SET DATE AND TIME] will appear. can be turned on and off with the LCD monitor and the viewfinder when the unit is in Tape Recording Mode or Card Recording Mode. 1 Open the LCD monitor out or extend the viewfinder to use. (-18-) ≥Select [YE
Summary of the content on the page No. 18
LSQT1091_ENG.book 18 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using Using the LCD monitor Using the viewfinder You can record the image while viewing it on the ª Extending the viewfinder opened LCD monitor. 1 Pull out the viewfinder and extend it by 1 Pull the LCD monitor out in the direction of pinching the extension knob. the arrow. ≥It can open up to 90o. 2 Adjust the angle of the LCD monitor according to your preference. ≥The viewfinder will be activated. (If the LCD monitor is opened, the
Summary of the content on the page No. 19
LSQT1091_ENG.book 19 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using ª To cancel Quick Start Quick Start 1 Set [SETUP] >> [QUICK START] >> [OFF]. When Quick Start is ON the battery power is still (-24-) being consumed, even when the LCD Monitor ≥If the [OFF/ON] switch is set to [OFF] while the and the Viewfinder are closed. unit is in quick start standby mode, the power The Camcorder will resume recording/pause turns off. mode about 1.7 seconds after the LCD Monitor ≥If the standby continues f
Summary of the content on the page No. 20
LSQT1091_ENG.book 20 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using condensation may be formed on the heads or Inserting/removing a cassette the cassette tape. (-72-) 1 Fit the AC adaptor or the battery and turn on ª When the cassette holder does not the power. come out 2 Slide the [OPEN/EJECT] lever and open the ≥Close the cassette cover completely and then cassette cover. open it again completely. ≥Check if the battery has run down. OPEN/ EJECT ª When the cassette holder cannot be housed ≥S
