Code Alarm CA 440SS user manual

Summary of the content on the page No. 1

CA 440SS Owners Manual
CAUTION!
Be certain that the vehicle is outdoors before using this or any re-
mote vehicle starting device. A running engine produces dangerous
carbon monoxide fumes which can be harmful or fatal if prolonged
exposure occurs. DO NOT remote start the vehicle if the car is
garaged

Summary of the content on the page No. 2

REMOTE STARTING THE VEHICLE: The system WILL NOT start the vehicle if any one of the following situations exist: 1. The vehicle's hood is opened. 2. The gear shift selector is not in Park. 3. The brake pedal is depressed. 1. To start the vehicle, press and release the transmitter button 2 times within 2 seconds. The vehicle will start and remain running for the pre- programmed 5, 10, 15, 20 minute run cycle. As a visual indication, the parking lights will flash or remain on depending on the se

Summary of the content on the page No. 3

TRANSMITTER PROGRAMMING: If the need arises for programming of additional or replacement transmitters, simply follow the 4 steps outlined below: 1. Turn the ignition to the ON position. 2. Press and release the programming button 3 times. 3. Press and hold the button of the transmitter you wish to add for 3 seconds. The parking lights will flash indicating the transmitter has been learned. 4. Repeat step 3 for each transmitter up to a total of 4.

Summary of the content on the page No. 4

Code Systems, Inc. Limited Lifetime Warranty Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should this Product under normal use and conditions, be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGI- NALLY INSTALLED, such defect(s) will be repaired or replaced

Summary of the content on the page No. 5