Summary of the content on the page No. 1
Owner’s
Manual
Model: X11
For Technical Assistance, please call (800) 638-3600,
or visit www.magnadyne.com
Summary of the content on the page No. 2
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Remote Control Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Quick Reference LCD Transmitter Operation . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 3
Introduction Congratulations on your purchase of a quality Marksman automotive security and remote start system. Marksman security products have been designed to provide the consumer with a technologically superior product with years of trouble free operation. The information enclosed will provide a ready reference of the operation and maintenance of your new Marksman security and remote start system. Remote Control Transmitters The LCD screen on the remote control displays graphic icons. It
Summary of the content on the page No. 4
LCD Transmitter Operation Transmitter Button System Function Remark Locks Doors & Arms System Arm and Bypass the 2 Stage Press Twice within 3 Seconds - Shock Sensor (Zone 4) Arm and Bypass the 2nd Press within 5 Seconds - Sensor (Zone 6) Arm and Bypass - Press within 5 Seconds - Sensor 1 and 2 Arm and Activate Hidden Alarm Function Press within 3 Seconds - Car Locator Wait for 30 Seconds After Arming Hold for 3 Remote Panic Function Press and Hold for 3 Seconds Seconds Silent Arming/Disarmin
Summary of the content on the page No. 5
LCD Display Transmitter Operations Transmitter Button System Function Remark System Trigger Record Check Press within 3 Seconds - SET - - System Status Check Press within 3 Seconds SET SET Optional Driving Pager Press within 3 Seconds -= SET Press within 3 Seconds Monitor Interior Temperature -= SET Chirp Indicators Chirp Function 1 Chirp System is Armed 2 Chirps System is Disarmed 3 Chirps Defective Sensor of Open Door Reminder 4 Chirps Disarm / Previously Triggered 2, 3, 6 Chirps Car Locator P
Summary of the content on the page No. 6
LED Display LED Function OFF System is Disarmed Slow Flashing System is Armed Fast Flashing System in Passive Arming On Solid System in Valet Mode 1 Flash - Pause Zone 1, Trigger for Hood 2 Flashes - Pause Zone 2, Trigger on Trunk 3 Flashes - Pause Zone 3, Trigger on Door Switch 4 Flashes - Pause Zone 4, Trigger on Sensor #1 5 Flashes - Pause Zone 5, Trigger on Ignition Switch 6 Flashes - Pause Zone 6, Trigger on Sensor #2 System Characteristics Siren/Horn Parking Light LED Doors Starter Dome
Summary of the content on the page No. 7
Manual Arming: Lock and Arm 1. Press the button on the transmitter. 2.The siren will chirp once and parking lights will flash once indicating that the system is now armed. The vehicle door will lock upon arming when interfaced with the security system. System Armed Door Ajar Trunk/Hood Ajar Clear the Flash Icon: Press the SET button 3 times within 3 seconds to clear the ARM ARM ARM flash icon on the LCD screen transmitter. Door Ajar / Defective Sensor Reminder If the siren sounds 3 times,
Summary of the content on the page No. 8
Automatic Arming: Lock and Arm (continued) Automatic Arming with Passive Door Locking (Additional programming required) The vehicle doors will automatically lock after the automatic arming cycle has been completed. Automatic Arming Bypass While the system is in disarmed mode, press the button twice. The horn/siren will respond with one chirp and the LED will turn “ON”. The security system will remain in this mode for as long as you wish. To exit this mode press the or buttons and t
Summary of the content on the page No. 9
Disarming: Unlock and Disarm (continued) Two Steps Door Unlock (Additional Wiring Required) This feature will independently unlock the drivers door only when disarming the security system. Pushing the button a second time within 3 seconds will unlock the other doors. Automatic Rearm (Must be Programmed On) If this feature is selected, the security system will automatically rearm itself within 60 seconds after disarming with the remote transmitter. Automatic rearm will cancel if any door i
Summary of the content on the page No. 10
Progressive Remote Vehicle Locator System Note: The remote vehicle location system is active 30 seconds after the alarm is armed. 1. Press the button to active the vehicle locator system. The horn/siren will beep 2 times and the parking lights will flash 3 times. This operation will repeat a second time. 2. Press the button again within 30 seconds. The horn/siren will beep 3 times and the parking lights will flash 3 times. This operation will repeat a second time. 3. Press the
Summary of the content on the page No. 11
Trigger the System (continued) LCD Transmitter Melody Sound When the Security System is triggered, it will alert the user with flashing icons on the LCD Display and audible melody sound. To stop the melody sound, press any button on the LCD transmitter. LCD Transmitter Clear the Flash Icon and Melody Sound When the Security System is triggered, the LCD screen will alert the user through melody sound and flashing icons. By pressing the “SET” button 3 times within 3 seconds it will clear th
Summary of the content on the page No. 12
Anti-Car Jacking (continued) Trigger the Anti-Car Jacking Mode Three Timer circuits will function as follows: First Timer Circuit 1. 50 seconds after the car jacking mode has been activated, the siren will begin to sound for 15 seconds. 2. During the 15 second activation period, you will be alerted to push the valet switch once to turn off the car jacking feature. 3. If by now the valet switch has not been pushed, it will enter the second timer circuit. Second Timer Circuit 65 seconds after the
Summary of the content on the page No. 13
Driver LCD Transmitter Paging It is useful in the event that someone wants to page the driver of the parked vehicle. (Optional) Inside the Vehicle Paging With the ignition switch in the "OFF" position, press the valet switch for 2 seconds to page the driver. One chirp will sound from the vehicle and the LCD transmitter will begin to sound with a melody. The icon will then appear on the LCD transmitter to confirm this function. Outside the Vehicle Paging (Optional and Requires Glass Mount
Summary of the content on the page No. 14
Channel 5 Output Press and hold the and button at the same time to activate the Channel 5 output. Channel 6 Output Press and hold the and button at the same time to activate the Channel 6 output. Channel 7 Output: (Default Setting = Defrost Control) Press and hold the and button at the same time to activate the Channel 7 output. Note: If Channel 7 has been programmed for defrost operation it will not function from the transmitter. 14
Summary of the content on the page No. 15
Remote Start Operation User Warnings As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of reach of children. 2. DO NOT leave anyone in the vehicle while running on remote control. 3. Alert any service personal that the vehicle can be started automatically. 4. DO NOT start the vehicle by remote while it’s in an enclosed area or garage. 5. Always apply the parking brake and lock the vehi
Summary of the content on the page No. 16
Remote Start Operation (continued) Quick Stop Feature This feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock/arm the vehicle for short periods of time. This will keep the engine running for climate controls to stay on. 1. Before turning the engine off with the ignition key, press the button twice. The LED will flash three times to indicate the feature is activated. 2. Turn the ig
Summary of the content on the page No. 17
Turn Off Remote Start When the engine is running by remote start and you wish to stop the engine from running: 1. Press the button twice on the remote transmitter. 2. Move the optional remote start toggle switch to the “OFF” position (if installed). 3. Press the vehicle’s brake pedal, the engine will stop running and the parking lights turn off to indicate the engine has stopped. Shut Down Input for Remote Starter If any of the following conditions exist while the system is operating, th
Summary of the content on the page No. 18
Remote LCD Icons Hidden Alarm Mode Armed Mode Your vehicle is in armed with Vehicle is in armed mode hidden alarm mode Valet Mode Car Jack Mode All the function shall be Car jacking mode is activated temporarily on hold Remote Transmission In-Range Indicator You are transmitting the signal to You are within the remote the control unit control range Sensor Trigger Hood Trigger Trigger on sensor 1 (zone 4) or Hood is illegally opened (Zone 1) optional sensor 2 (zone 6) Warn Away Trigger Trunk Trig
Summary of the content on the page No. 19
Programming the LCD Transmitter Button Description Operation LCD Screen Lamp Turns ON for Press and Hold for 1 Second SET Five Seconds 1 Melody Sounds to Confirm Press and Hold for 3 Seconds Timer Programming Mode SET 2 Melody Sounds to Confirm Press and Hold for 5 Seconds Power Save Mode SET 1 Melody Sounds to Confirm SET (3X) Clear the Flash Icon and Melody Sound Press within 3 Seconds on the LCD Screen SET & LOCK Button Lock Enabled/Disabled Press within 3 Seconds SET & UNLOCK Melody/Vibrate
Summary of the content on the page No. 20
Programming of the LCD Transmitter Stop the Trigger Melody While triggering the alarm, the LCD screen will alert the user through melody sound and flashing trigger icon. Press any button on the transmitter to stop melody sound only. Button Lock Use this mode to disable the transmission function of the remote control temporarily to prevent any inadvertent pressing of buttons. 1. Press the “SET” button first, within 3 seconds press and hold the button for 2 seconds to activate or cancel the b
