Summary of the content on the page No. 1
300Mbps Wireless N VPN Router
TEW-659BRV
ŸQuick Installation Guide (1)
ŸTroubleshooting (7)
1.01
Summary of the content on the page No. 2
1. Before You Start Package Contents ŸTEW-659BRV ŸCD-ROM (User's Guide) ŸMulti-Language Quick Installation Guide ŸNetwork Cable (1.5m / 5ft) ŸPower Adapter (12V DC, 1A) If any of the above contents are missing, please contact your reseller. Minimum Requirements ŸA computer with a wired or wireless network adapter properly installed (Note: It is recommended that you configure the Wireless Router from a wired computer) ŸWeb Browser: Internet Explorer (6.0 or higher), Firefox (2.0 or higher), O
Summary of the content on the page No. 3
2. Power off your Cable or DSL 6. Connect the Power Adapter to modem. the TEW-659BRV and then to a power outlet. Push the power 3. Disconnect the network cable button to the “On” position. from your Cable or DSL modem and your computer. 4. Connect one end of a network cable to one of the TEW-659BRV's network ports. Connect the other end of the cable to the computer's network port. 7. Power on your cable or DSL modem. Wait until the LEDs indicate that thye modem is fully booted up. C
Summary of the content on the page No. 4
3. Configure the Wireless Router Note: 1. It is recommended that you configure the Wireless Router from a wired computer. 2. For VPN configuration instructions please refer to the User's Guide. The User's Guide is located on the provided CD-ROM. 1. Open your web browser, type 5. Enter the Old password (By default, http://192.168.10.1 in the Address the Password is admin), enter a Bar, and then press Enter. New Password, reconfirm the New Password and then click Next. 2. Enter the Syst
Summary of the content on the page No. 5
6. Select your Time Zone and then 9. You will need to configure the following: click Next. Wireless (Enable/ Disable): The default setting (Enable) must be selected. Select Disable if you do not want any wireless computers or devices to connect to this device. Network ID (SSID): The SSID is 7. Select Auto Detecting WAN Type the wireless network name of your and then click Next. wireless network (e.g. wireless router or access point). Enter a unique SSID. Choose something that you wo
Summary of the content on the page No. 6
Note: 1. To protect your network from any unauthorized access it is recommended to enable wireless encryption. 2. The example below is for WPA-PSK/WPA2-PSK (AES) security. If you select WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your wireless adapters do not support WPA or WPA2, then select WEP. 3. WEP encryption only supports 802.11b/g speed of up to 54Mbps. 4. Once encryption is enabled on the router, each wireless computer and device must be configur
Summary of the content on the page No. 7
14. Open up your browser and enter in a URL (e.g. http://www.trendnet.com) to verify that you have Internet connection. Your configuration is now complete For detailed information regarding the TEW-659BRV’s configuration and advanced settings, please refer to the User's Guide included on the CD-ROM, or TRENDnet's website at http://www.trendnet.com. 6
Summary of the content on the page No. 8
Troubleshooting 1. I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-659BRV's web configuration page? 1. Check your hardware settings again by following the instructions in Section 2. 2. Make sure the Network Port and Wireless lights are lit. 3. Make sure your TCP/IP settings are set to Obtain an IP address automatically (see the steps below). 4. Reset the TEW-659BRV. Press the button on
Summary of the content on the page No. 9
Windows XP/2000 1. Go into the Control Panel, double- click the Network Connections icon and then right-click the Local Area Connection icon and then click Properties. 2. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Obtain an IP address automatically. 2. I am not sure what type of Internet Account Type I have for my cable/DSL connection. How do I find out? Contact your Internet Service Provider's (ISP) support service for the correct information. 3. I went th
Summary of the content on the page No. 10
5. Please give me an explanation of all the LEDs and Buttons. LED/Button Color Sequence Definition Ÿ Wireless LAN is on or enabled/Wireless data transmission Blinking Green Ÿ WPS is activated (Blinking rapidly for 2 minutes) Wireless/WPS LED N/A Off Wireless LAN is off or disabled WAN port is connected at 10/20Mbps or Solid 100/200Mbps (Half/Full Duplex) Green WAN port data transmitting/receiving at Blinking 10/20Mbps or 100/200Mbps (Half/Full Duplex) WAN Link/Act LED N/A Off WAN port is di
Summary of the content on the page No. 11
Summary of the content on the page No. 12
Summary of the content on the page No. 13
Summary of the content on the page No. 14
TRENDnet 20675 Manhattan Place Torrance, CA 90501. USA Copyright ©2011. All Rights Reserved. TRENDnet.
