Sirius Satellite Radio SSDK1 user manual

User manual for the device Sirius Satellite Radio SSDK1

Device: Sirius Satellite Radio SSDK1
Category: Satellite TV System
Manufacturer: Sirius Satellite Radio
Size: 2.08 MB
Added : 6/15/2013
Number of pages: 44
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Sirius Satellite Radio SSDK1. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sirius Satellite Radio SSDK1.

For your convenience

If looking through the Sirius Satellite Radio SSDK1 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Sirius Satellite Radio SSDK1 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Sirius Satellite Radio SSDK1 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Sirius Satellite Radio SSDK1 User manual - Online PDF
Advertisement
« Page 1 of 44 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sirius Satellite Radio SSDK1 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Sirius Satellite Radio SSDK1. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Home Signal Distribution Kit for
Satellite TV Plus SIRIUS
For Use With a Single SIRIUS Radio
Installation Guide
SR-101C
SIRIUS/DBS Signal Combiner System
SR-2251 Splitter-Indoor
Made in China
SR-101C
SIRIUS/DBS Signal Combiner System
SR-2261 Combiner-Outdoor
Made in China
DBS IN SIRIUS IN
DC IN DBS OUT SIRIUS OUT

Summary of the content on the page No. 2

Thank you for purchasing the Home Signal Distribution Kit for Satellite TV Plus SIRIUS The Home Signal Distribution Kit for Satellite TV Plus SIRIUS allows you to com- ® ® ® bine your Dish Network or DIRECTV signal with the SIRIUS signal into one RG-6 cable, avoiding the necessity of installing a separate cable from the SIRIUS antenna to the SIRIUS radio. Instead, both the satellite TV signal and SIRIUS signal are combined together outdoors near the satellite TV dish. Inside the home at a c

Summary of the content on the page No. 3

Table of Contents Box Con Ten TS . . . . . . . . . . . . . . . . . . . . . . . . 4 Tool S Req UIReD . . . . . . . . . . . . . . . . . . . . . . . 4 Ca UTIon an D Wa RnInGS . . . . . . . . . . . . . . . . . . . . 4 ComBIne R an D SPl ITTeR Po RT IDen TIf ICaTIon . . . . . . . . . . 5 InSTalla TIon Con SIDeRaTIon S . . . . . . . . . . . . . . . . . 5 Multiswitches, Signal Splitters, DishPro Adapters .

Summary of the content on the page No. 4

Box Contents Open the box and verify that all the items shown below are included with the kit. If any items are missing, please contact your dealer or retailer immediately. Keep your purchase receipt and the packaging materials should you need to return or ship the kit. a . Outdoor Antenna B. Antenna Base C A C. Combiner (SR2261) H D. Splitter (SR2251) D e. AC Power Adapter I f . Rubber Cable Boot E G. RG-174 Adapter Cable J H. U-Bolts (2) I. Mounting Brackets (2) F K J. Hex Lock Nuts (4) K.

Summary of the content on the page No. 5

Combiner and Splitter Port Identification For a successful installation, the various cables used in the installation process described later in this manual must be connected to the correct ports on the Combiner and Splitter. The following illustration identifies the ports on each de- vice. This diagram should be used for reference during installation. COMBINED OUT COMBINED IN COMBINER SPLITTER DBS IN SIRIUS IN POWER DBS SIRIUS IN OUT OUT S SI IR RI IU US S/ /S Sa at te el ll li it te e T TV V

Summary of the content on the page No. 6

Installation o verview Depending upon your particular configuration, you may decide to combine the satellite TV and SIRIUS signals on the roof near the satellite TV dish, or if a multiswitch is present, to combine the signals before or after the multiswitch. The following sections explain the various configurations: — Simple Configuration: Your satellite TV system has a single LNB and no multiswitch (page 7). — Before Multiswitch Configuration: Your satellite TV system uses a multiswitch an

Summary of the content on the page No. 7

Simple Configuration (Single LNB, No Multiswitch) A simple configuration without a multiswitch might look like the following illustra- tion. The SIRIUS signal and the satellite TV signal are combined into one and use the existing satellite TV cable run from the roof all the way into the room in- side the home where the SIRIUS radio and satellite TV receiver are located. The signals are then split and connected to each device. The benefit of the SIRIUS Combiner/Splitter in this scenario is avo

Summary of the content on the page No. 8

DISHPRO ADAPTER WITHOUT DISHPRO ADAPTER: WITH DISHPRO ADAPTER: COMBINER COMBINER COMMON COMMON CABLE RUN CABLE RUN SPLITTER SPLITTER SIRIUS SIRIUS RECEIVER RECEIVER RECVR/TUNER RECVR/TUNER Materials Required In order to install the SIRIUS antenna and the Combiner and Splitter, you will need to purchase several lengths of RG-6 cables to complete your installation. The length of the cables needed is dependent upon your particular configuration. RG-6 cable is typically sold in lengths of 10, 25,

Summary of the content on the page No. 9

The following tables provide maximum overall cable runs and suggested maxi- mum cable lengths. Maximum lengths for the overall cable runs must be ob- served. (The actual cable runs in your installation may be less than the maximum lengths shown.) maximum o verall Cable Run l ength SIRIUS: Cable No. 1 + Common + Cable No. 4 = 250 feet Typical Satellite TV: Cable No. 2 + Common + 200 feet Cable No. 3 = Satellite TV Dish network using l egacy Receiver/Tuner with Select: DishPro Adapter: 100 F

Summary of the content on the page No. 10

Before Multiswitch Configuration This configuration is only used when the multiswitch is not located on the roof. In this configuration the SIRIUS signal and the satellite TV signal are combined on one common cable on the roof. The combined signal is then carried from the roof to the multiswitch where the signal is split back into separate signals before the multiswitch. The benefit of the SIRIUS Combiner/Splitter in this installation is avoiding having to run an additional cable for the SI

Summary of the content on the page No. 11

DISHPRO ADAPTER WITHOUT DISHPRO ADAPTER: WITH DISHPRO ADAPTER: COMBINER COMBINER COMMON COMMON CABLE RUN CABLE RUN MULTISWITCH MULTISWITCH SPLITTER SPLITTER RECVR/TUNERs SIRIUS RECEIVER RECVR/TUNERs SIRIUS RECEIVER Materials Required In order to install the SIRIUS antenna and the Combiner and Splitter, you will need to purchase several lengths of RG-6 cables to complete your installation. The length of the cables needed is dependent upon your particular configuration. RG-6 cable is typically

Summary of the content on the page No. 12

The following tables provide maximum overall cable runs and suggested maxi- mum cable lengths. Maximum lengths for the overall cable runs must be ob- served. (The actual cable runs in your installation may be less than the maximum lengths shown.) maximum o verall Cable Run l ength SIRIUS: Cable No. 1 + Common + Cable No. 5 = 250 feet Typical Satellite TV: Cable No. 2 + Common + 200 feet Cable No. 3 = Satellite TV Dish network using l egacy Receiver/Tuner with Select: DishPro Adapter: 100 Fe

Summary of the content on the page No. 13

a fter Multiswitch Configuration (Multiswitch on the Roof) When the multiswitch is located on the roof (either integrated in the satellite dish or externally mounted), the SIRIUS signal and satellite TV signal from the output of the multiswitch are combined on one common cable. The combined signal is carried from the roof all the way into the room inside the home where the SIRIUS radio and satellite TV receiver/tuner are located, where the signals are then split and connected to each device

Summary of the content on the page No. 14

DISHPRO ADAPTER The next diagram shows the same configuration as the previous illustration. You can see that one output of the multiswitch is connected to the input of the Combiner, and that there are no devices such a splitter or DishPro adapter in the common cable run between the Combiner and Splitter. If a DishPro adapter is needed, it must be installed after the Splitter as shown. WITHOUT DISHPRO ADAPTER: WITH DISHPRO ADAPTER: COMBINER COMBINER MULTISWITCH MULTISWITCH COMMON COMMON CABLE

Summary of the content on the page No. 15

Materials Required In order to install the SIRIUS antenna and the Combiner and Splitter, you will need to purchase several lengths of RG-6 cables to complete your installation. The length of the cables needed is dependent upon your particular configuration. RG-6 cable is typically sold in lengths of 10, 25, or 50 ft., with “F” type connec- tors on each end. These cables may be purchased at your local hardware store, home center, or electronics retailer. The cables which must be purchased are

Summary of the content on the page No. 16

maximum o verall Cable Run l ength SIRIUS: Cable No. 1 + Common + Cable No. 5 = 250 feet Typical Satellite TV: Cable No. 2 + Common + 200 feet Cable No. 3 = Satellite TV Dish network using l egacy Receiver/Tuner with Select: DishPro Adapter: 100 Feet Cable No. 2 + Common + Cable No. 3 = Suggested Cable no. Cable Description maximum l ength 1 SIRIUS Antenna to Combiner 50 feet Existing Cable - Satellite TV LNB to Combiner 2 (This cable is not present if the Multiswitch is inte- 10 feet gra

Summary of the content on the page No. 17

After Multiswitch Configuration (Multiswitch Inside the Home) When the multiswitch is located inside the home, a cable from the SIRIUS anten- na needs to be installed and run to the vicinity of the multiswitch inside the home. There the SIRIUS signal and satellite TV signal from the output of the multiswitch are combined on one common cable. The combined signal is carried all the way into the room where the SIRIUS radio and satellite TV receiver/tuner are located, where the signals are then

Summary of the content on the page No. 18

DISHPRO ADAPTER The next diagram shows the same configuration as the previous illustration. You can see that one output of the multiswitch is connected to the input of the Combiner, and that there are no devices such a splitter or DishPro adapter in the common cable run between the Combiner and Splitter. If a DishPro adapter is needed, it must be installed after the Splitter as shown. WITHOUT DISHPRO ADAPTER: WITH DISHPRO ADAPTER: COMBINER COMBINER MULTISWITCH MULTISWITCH COMMON COMMON CABLE

Summary of the content on the page No. 19

1 RG-6 2 EXISTING CABLE RG-174 Multiswitch 5 RG-6 Adapter Cable Splitter M Combiner RG-6 3 S 4 RG-6 C COMMON EXISTING RG-6 CABLING The following tables provide maximum overall cable runs and suggested maxi- mum cable lengths. Maximum lengths for the overall cable runs must be ob- served. (The actual cable runs in your installation may be less than the maximum lengths shown.) maximum o verall Cable Run l ength SIRIUS: Cable No. 1 + Common + Cable No. 5 = 250 feet Typical Satellite TV: Cable No.

Summary of the content on the page No. 20

Installation Procedures This installation section is broken into several sections. The first section de- scribes how to install the SIRIUS antenna and is the same for all configurations. After installing the antenna, follow the Combiner/Splitter installation procedure section for your particular configuration. SIRIUS a ntenna Installation Procedure A successful antenna installation consists of four steps: f irst, assembling the antenna; Second, determining a location for the antenna; Third, c


Alternative user manuals
# User manual Category Download
1 Sirius Satellite Radio DSR 3700 User manual Satellite TV System 2
2 Sirius Satellite Radio 128-8665 User manual Satellite TV System 0
3 Sirius Satellite Radio XTR7CK User manual Satellite TV System 2
4 Sirius Satellite Radio SR-101C User manual Satellite TV System 0
5 Sirius Satellite Radio SR-101C User manual Satellite TV System 1
6 Sirius Satellite Radio SR-2251 User manual Satellite TV System 0
7 Sirius Satellite Radio DSR 3800 User manual Satellite TV System 0
8 Sony SA-VE502 User manual Satellite TV System 12
9 Sony DIRECTV RECEIVER SAT-W60 User manual Satellite TV System 0
10 Sony SA-VE305 User manual Satellite TV System 13
11 Sony SA-VE315 User manual Satellite TV System 28
12 Sony DST-HD500 User manual Satellite TV System 6
13 Sony SA-VE230 User manual Satellite TV System 2
14 Sony SAT-A2 User manual Satellite TV System 0
15 Sony MF68-00258A User manual Satellite TV System 0