Summary of the content on the page No. 1
VIP X1600 M4S
Encoder module
en Installation and Operating Manual
Summary of the content on the page No. 2
VIP X1600 XFM4
Summary of the content on the page No. 3
VIP X1600 Table of Contents | en 3 Table of Contents 1Preface 7 1.1 About this Manual 7 1.2 Conventions in this Manual 7 1.3 Intended Use 7 1.4 EU Directives 8 1.5 Rating Plate 8 2 Safety Information 9 2.1 Electric Shock Hazard 9 2.2 Installation and Operation 9 2.3 Maintenance and Repair 9 3 Product Description 11 3.1 Scope of Delivery 11 3.2 System Requirements 11 3.3 Overview of Functions 12 3.4 Connections 15 4 Installation 17 4.1 Preparations 17 4.2 Installing Modules 17 4.3 Connections 19
Summary of the content on the page No. 4
4 de | Table of Contents VIP X1600 5.21 Advanced Mode: Storage Management 48 5.22 Advanced Mode: Recording Profiles 50 5.23 Advanced Mode: Retention Time 52 5.24 Advanced Mode: Recording Scheduler 53 5.25 Advanced Mode: Recording Status 55 5.26 Advanced Mode: Alarm Connections 56 5.27 Advanced Mode: VCA 59 5.28 Advanced Mode: VCA Profiles 60 5.29 Advanced Mode: VCA Scheduled 64 5.30 Advanced Mode: VCA Event Triggered 66 5.31 Advanced Mode: Audio Alarm 67 5.32 Advanced Mode: Alarm E-Mail 68 5.33
Summary of the content on the page No. 5
VIP X1600 Table of Contents | en 5 8.4 LEDs 106 8.5 Processor Load 107 8.6 Network Connection 107 8.7 Serial interface 107 8.8 Terminal Block 107 8.9 Communication with Terminal Program 109 8.10 Copyrights 111 9 Specifications 113 9.1 VIP X1600 M4S Encoder Module 113 9.2 Protocols/Standards 113 9.3 Image Refresh Rate 114 10 Glossary 115 11 Index 119 Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06
Summary of the content on the page No. 6
6 de | Table of Contents VIP X1600 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
Summary of the content on the page No. 7
VIP X1600 M4S Preface | en 7 1Preface 1.1 About this Manual This manual is intended for persons responsible for the installation and operation of the VIP X1600 XF. International, national and any regional electrical engineering regulations must be followed at all times. Relevant knowledge of network technology is required. The manual describes the installation and operation of the unit. 1.2 Conventions in this Manual In this manual, the following symbols and notations are used to draw attenti
Summary of the content on the page No. 8
8 en | Preface VIP X1600 M4S 1.4 EU Directives The VIP X1600 XF network video server complies with the requirements of EU Directives 89/ 336 (Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive). 1.5 Rating Plate For exact identification, the model name and serial number are inscribed on the rating plate on the bottom of the VIP X1600 XF base and on the rating plates on the circuit boards of the modules. Please make a note of this information before installation,
Summary of the content on the page No. 9
VIP X1600 M4S Safety Information | en 9 2 Safety Information 2.1 Electric Shock Hazard – Always install a module in the appropriate VIP X1600 XF base housing only. – If a fault occurs, disconnect the VIP X1600 XF from the power supply and from all other units. – Install the power supply and the unit only in a dry, weather-protected location. – If safe operation of the unit cannot be ensured, remove it from service and secure it to prevent unauthorized operation. In such cases, have the unit ch
Summary of the content on the page No. 10
10 en | Safety Information VIP X1600 M4S DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
Summary of the content on the page No. 11
VIP X1600 M4S Product Description | en 11 3 Product Description 3.1 Scope of Delivery – VIP X1600 M4S encoder module – Mounting kit for installation in the VIP X1600 XF base – Terminal plugs – Quick Installation Guide NOTICE! Check that the delivery is complete and in perfect condition. Arrange for the unit to be i checked by Bosch Security Systems if you find any damage. 3.2 System Requirements General Requirements – VIP X1600 XF base or VIP X1600 B base housing – Computer with Windows XP or
Summary of the content on the page No. 12
12 en | Product Description VIP X1600 M4S 3.3 Overview of Functions Network Video Encoder The VIP X1600 M4S encoder module is a network video server for up to four independent video channels. It is primarily designed for encoding video and control data for transfer over an IP network. The audio version of the module also allows the transmission of audio signals to compatible units. The use of existing networks means that integration with CCTV systems or local networks can be achieved quickly
Summary of the content on the page No. 13
VIP X1600 M4S Product Description | en 13 Remote Control For remote control of external units such as pan or tilt heads for cameras or motorized zoom lenses, control data is transmitted via the module's bidirectional serial interface. This interface can also be used to transmit transparent data. Tamper Detection and Motion Detectors The VIP X1600 M4S encoder module offers a wide range of configuration options for alarm signaling in the event of tampering with the connected camera. An algorith
Summary of the content on the page No. 14
14 en | Product Description VIP X1600 M4S Summary The VIP X1600 M4S encoder module provides the following main functions: – Video and data transmission over IP data networks – Dual Streaming function for simultaneous encoding with two individually definable profiles – Multicast function for simultaneous image transmission to multiple receivers – Four analog BNC composite video inputs (PAL/NTSC) – Video encoding to international standard MPEG-4 – Transparent, bidirectional data channel via RS-23
Summary of the content on the page No. 15
VIP X1600 M4S Product Description | en 15 3.4 Connections 1 Video inputs Video In 1 to Video In 4 BNC sockets for attaching video sources 2 Audio inputs (mono) Audio In 1/2 and Audio In 3/4 3.5 mm / 1/8 in. stereo sockets line-outs for connecting audio cables (only audio versions of the module) 3 Terminal block for alarm inputs, relay outputs and serial interface Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06
Summary of the content on the page No. 16
16 en | Product Description VIP X1600 M4S DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
Summary of the content on the page No. 17
VIP X1600 M4S Installation | en 17 4 Installation 4.1 Preparations The module is exclusively designed for installation in the VIP X1600 XF base. Installing the units is a quick and easy operation that does not require any additional tools. 4.2 Installing Modules Installation of the different VIP X1600 XF modules in the VIP X1600 XF base is described in the relevant Quick Installation Guide. Please also take note of the following basic notes when installing a unit. CAUTION! Do not install a m
Summary of the content on the page No. 18
18 en | Installation VIP X1600 M4S Rating Plates Every module has a label on the circuit board containing a printed MAC address by which the module can be uniquely identified. Take note of this MAC address and the location in the VIP X1600 XF base before installation so that you can later identify the module, even after it has been inserted, for example when performing fault diagnosis. Removing and Exchanging Modules It is also possible to install, remove and exchange modules during operation
Summary of the content on the page No. 19
VIP X1600 M4S Installation | en 19 4.3 Connections Cameras You can connect a maximum of four video sources to the module. Any cameras and other video sources that produce a standard PAL or NTSC signal are suitable. 1. Connect the cameras or other video sources to the BNC sockets Video In 1 to Video In 4 using a video cable (75 Ohm, BNC plug). 2. If the video signal is not looped through, termination is performed by a software setting if necessary (see Section 5.17 Advanced Mode: Video Input,
Summary of the content on the page No. 20
20 en | Installation VIP X1600 M4S Data interface The bidirectional data interface is used to control units connected to the module, such as a dome camera with a motorized lens. The connection supports the RS-232, RS-422 and RS-485 transmission standards. The module offers the serial interface via the orange terminal block (see Section 8.8 Terminal Block, page 107). The range of controllable equipment is expanding constantly. The manufacturers of the relevant equipment provide specific infor
