Grandstream Networks GXV350X user manual

Summary of the content on the page No. 1

Grandstream Networks, Inc.
Watch the Video Streaming of Grandstream IP Cameras GXV36xx and
Video Encoders GXV350x with Logiware go1984 Ver. 3.8.1.9




Grandstream Networks, Inc. 2011

Summary of the content on the page No. 2

Introduction: Grandstream IP cameras and Video Encoders have the advantage of being compatible with major monitoring systems that are found in the market, which is considered an important requirement in an enterprise environment. Grandstream IP cameras are not only compatible with the aforementioned systems, but goes beyond that to be compatible with simple desktop applications that you, the individual user, want to use to monitor your office, to keep an eye on your children at home, to k

Summary of the content on the page No. 3

Configuration on go1984: To configure the go1984 to get the streaming from the Grandstream IP Camera or Video Encoder please follow the steps below: 1. Launch the go1984 application 2. Depending on your access rights (please refer to go1984 user manual), you can add an IP camera or Video Encoder. To add an IP camera or a Video Encoder, there are 2 ways: a. Click On the “Add Camera” pull down menu (see Fig. 2): i. Select Grandstream ii. Select your Grandstream IP camera or Video Encode

Summary of the content on the page No. 4

3. When the Add Camera dialog box is displayed, you can do the following: a. In the properties section (see Fig. 4), enter the name of the camera (this can be any name you want to identify the camera with). b. Enter the IP address of the IP Camera or Video Encoder c. Enter the port number of your selected device (By default it’s 80) d. Enter the Username and Password of the selected device. Fig.4: Properties section in Add Camera Dialog Box 4. Grandstream IP camera or Video