Summary of the content on the page No. 1
Supreme Image
560TVL, 128x WDR
High Resolution WDR V/F Dome Camera SID-560 User’s Manual
Thank you for purchasing a SAMSUNG CCD CAMERA.
SALES NETWORK
Before attempting to connect or operate this product,
• SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea
please read these instructions carefully and save this manual for future use.
TEL : +82-31-740-8132~6 FAX : +82-31-740-8144
• SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswo
Summary of the content on the page No. 2
Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description. ■ SID-560 SERIES • NTSC MODEL • PAL MODEL SID-560N SID-560P The lightning flash with an arrowhead symbol, within an equilateral triangle is ■ MODEL DESCRIPTION intended to alert the user to the presence of uninsulated “dangerous voltage” • SID-560X _ within the product's enclosure that may b
Summary of the content on the page No. 3
Samsung Techwin cares for the environment at all product manufacturing Features stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin s will to create environment-friendly products, Ultra High Resolution DIS (Digital Image Stabilizer) and indicates that the product satisfies the EU RoHS Directive. By adopting a double-speed 410,000 pixel Sony CCD, the The DIS function compensates fo
Summary of the content on the page No. 4
Contents 8 19 Precautions Operating Your Camera Menu Configuration 19 Menu Setup 20 10 Components and Accessories LENS 21 EXPOSURE 22 WHITE BALANCE 24 11 Overview BACKLIGHT 26 SSNR 28 DAY/NIGHT 29 13 Installation IMAGE ADJ 30 Installation 13 SPECIAL 32 Adjust the panning and tilting, rotating while watching the monitor 15 EXIT 36 16 37 Troubleshooting Connection Connecting To Monitor 16 Specification 39 17 Connecting To Power 40 Dimension RS-485 communication control 18
Summary of the content on the page No. 5
Precautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or subject Never keep the camera face to extreme temperature conditions. environment where the humidity is high. them to physical shocks. strong light directly. Only use the camera under conditions It can cause the image quality to be It can cause malfunctions to occur. It can damage the CCD. where temperatures are between poor. -10˚C and +50˚C. Be especially careful to provide ventilation when
Summary of the content on the page No. 6
Components and Accessories Overview 1. SID-560 2. Instruction Manual 3. M4 Tapping Screw 4EA 4. M4 Machine Screw 4EA 5. Adapter plate 6. Installation Video Output Cable COLOR CCD CAMERA 10 User’s Manual COLOR CCD CAMERA 11 User’s Manual
Summary of the content on the page No. 7
Overview Installation Pan Base Installation control panning angle of camera Rotate Base Notes control rotating angle of camera • The installation should be done by qualified service personnel or sysytem X2.5 Vari-focal Lens Module installers. Rotate Base Holding Screw • If the ceiling material is not strong enough to hold the installation screws, the fix rotated position camera may fall off. Reinforce the ceiling as needed. Pan Base Holding Screws (Color : Silver) fix panned position 1) Separate
Summary of the content on the page No. 8
Installation Adjust the panning and tilting, rotating while watching the monitor When installing on a adapter plate 1) Place the bracket provided on the 73˚ installation surface and fix it with the M4 An arrow for installing directions 145˚ 195˚ tapping screws (provided). adapter plate (Select either 85X85 or 83.5X46) 170˚ 2) When placing the camera body on the Tilt Base plate, insert the plate pin into the mounting hole on the body as shown in Rotate Base figure-1 and fix it by turning clock
Summary of the content on the page No. 9
Connection Connecting to Monitor Connecting to Power Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. Connect the adaptor to the power input connector as shown in the figure below. The recommended adaptor specification for SID-500N/SID-500P is DC 12V / 500mA. CCTV Camera Monitor • As the connecting method varies with the instruments, refer to the manual supplied with the instrument. When the resistance value of copper wire is at [20°C(68°F)] 2 2 2 2 • If necessary, you can connect th
Summary of the content on the page No. 10
Connection Operating Your Camera RS-485 communication control Menu Configuration Connecting to RS-485 Control Cable Setup Menu LENS • DC CONTROL CABLE SPEC EXPOSURE • SHUTTER • AGC • SENS-UP RED (TRX+) RS-485+ • RETURN WHITE(TRX-) RS-485- WHITE BALANCE • ATW • MANUAL • AWC SET • OUTDOOR • INDOOR Using a RS-485 communication, it will be able to control the OSD menu at the BACKLIGHT • OFF • WDR • BLC SAMSUNG TECHWIN System Controller or DVR. (1) The case which it controls from the PC SSNR • ON
Summary of the content on the page No. 11
Operating Your Camera MAIN SETUP Menu Setup Change the status using Select the function using 1.LENS DC the LEFT or RIGHT button. the UP or DOWN button. Use the five buttons on back of the camera. 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT SET button LEFT RIGHT UP DOWN 3. Set up a selected item by using the Left and Right buttons. button button button button 4. To finish the setting, select ‘EXIT’ and press the SET button. 1. Press the SE
Summary of the content on the page No. 12
Operating Your Camera DC : Select Auto Iris Lens SHUTTER : You can select either auto or manual shutter. - A.FLK : Select this when you experience picture flicker, which can happen when • When DC is selected, you can control screen brightness. The range of there is a clash with the frequency of the installed lighting. brightness control is between 1 and 70. Adjust the brightness appropriately - ESC : Select this to control the shutter speed automatically. If ESC is selected, the for optimal scre
Summary of the content on the page No. 13
Operating Your Camera RETURN : AWC SET : To find the optimal setting for the current luminance environment in Select this to save the changes in the EXPOSURE menu and return to the SETUP menu. this mode, set the point the camera towards a sheet of white paper and press the SET button. If the environment changes, readjust it. Notes MANUAL : Select this to fine-tune White Balance manually. Set White Balance • If you press the SET button in ‘AUTO’ mode, You can adjust brightness by first by using
Summary of the content on the page No. 14
Operating Your Camera 3. Select a desired mode using the Left and Right buttons and press the SET button. BACKLIGHT Select WDR to adjust the WDR LIMIT and LEVEL. This camera is designed so that it delivers a distinctive subject and background at - LIMIT : Adjust the WDR Sensitivity by selecting LOW, MIDDLE, or HIGH. the same time, even when the subject is in backlight, unlike conventional cameras, - LEVEL : Adjust the WDR Brightness by controlling the bar from 0 to 100. by adopting a proprietar
Summary of the content on the page No. 15
Operating Your Camera SSNR DAY/NIGHT You can display pictures in color or black and white. This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up 1. When the SETUP menu screen is displayed, select ’SSNR’ by using the Up and Down buttons so that the arrow indicates ’SSNR’ . and Down buttons so that the arrow indicates DAY/NIGHT . MAIN SETUP MAIN SETUP 1.LENS DC 1.LENS DC 2.EXPOSURE 2.EXPOSURE 3.W
Summary of the content on the page No. 16
Operating Your Camera EXTERN : This mode allows you to apply a desired filter to external signals. IMAGE SETUP 1. FREEZE OFF Notes 2. V-REV OFF • When using a Video Auto Iris Lens, if you set the lens level to low, automatic 3. H-REV OFF switching between Color and Black & White may not occur. 4. D-ZOOM OFF • You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’. 5. SHARPNESS ON At this time, the exchange between DAY mode and NIGHT mode operates as like selecting ‘COLOR’ m
Summary of the content on the page No. 17
Operating Your Camera Set it to ‘ON’ by using the Left and Right buttons. SPECIAL Notes Notes 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Up and Down buttons so that the arrow indicates ‘SPECIAL’. • • When the CAM TITLE menu is ‘OFF’, no When the CAM TITLE menu is ‘OFF’, no SPECIAL 1. CAM TITLE OFF title will be displayed on the monitor title will be displayed on the monitor MAIN SETUP 2. MOTION DET OFF screen even if you enter one. screen even if you enter one. 1.
Summary of the content on the page No. 18
Operating Your Camera Enter a title, move the cursor to ’POS’ and press the SET button. The entered Notes title appears on the screen. Select the position to display the title on the • MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the screen by using the 4 direction buttons and press the SET button. When the monitor screen. position is determined, select ’END’ and press the SET button to return to the • When motion is detected, “MOTION DETECTION” expression is displaye
Summary of the content on the page No. 19
Operating Your Camera Troubleshooting COMM ADJ (Communication Adjustment): Refer to the following table if you are experiencing trouble with your camera. This function sets up the camera communication status when controlling the Contact an authorized technician if the table does not provide you with a camera through an external control device. solution to the trouble. Problem Solution Nothing appears on • Check that the power cord and line connection the screen. between the camera and monitor ar
Summary of the content on the page No. 20
Troubleshooting Specifications SID-560N SID-560P Problem Solution Input voltage DC12V POWER Power consumption 2.5W The Motion Detection • Check that MOTION DEF of SPECIAL SETUP menu Size Diagonal 6mm (1/3") Sony DS CCD function does not is ‘OFF’. CCD Total Pixels 811(H) x 508(V) 795(H) x 595(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) work. Scanning System 2:1 Interlace Sync Horizontal:15.734 KHz Horizontal:15.625 KHz, Frequency Color is not correct. • Check the setting of WHITE BAL SET
