Sony Pole Mount Adaptor SNCACA2 user manual

Summary of the content on the page No. 1

OUTDOOR HOUSING MOUNTING BRACKET
Installation and Operation Instructions for the following models:
UNI-PMA1, SNCAPM3
(1) Supplied Parts
(1) Mount bracket
(4) Hex head bolts (3/8" - 16 x 1")
(4) Lockwasher (3/8")
(4) Flat washers (3/8")
UNI-CMA1, SNCACA2
(1) Supplied Parts
(1) Wall mount bracket
(4) Hex head bolts (3/8" - 16 x 1")
(4) Lockwasher (3/8")
(4) Flat washers (3/8")
(1) Operation Instruction Manual
12/27/05 81-IN6564

Summary of the content on the page No. 2

PRECAUTIONS ON INSTALLATION 1 Both the pole mount adapter and the corner mount adapter are designed for outdoor use in conjunction with a wall mount bracket. 2 The combined weight of camera, lens, housing, pan/tilt, and the wall mount bracket must not exceed 75 lbs. (34 kg). 3 Select a location where the combined weight of the bracket, housing, pan/tilt and the wall mount bracket can be properly supported. INSTALLING THE POLE MOUNT ADAPTER INSTALLING THE CORNER MOUNT ADAPTER

Summary of the content on the page No. 3

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS 1 Read Instructions - All the safety and operating instructions should be read before the unit is CAUTION operated. RISK OF ELECTRIC SHOCK ! DO NOT OPEN 2 Retain Instructions - The safety and operating instructions should be retained for future reference. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 3 Heed Warnings - All warnings on the unit and in DO NOT REMOVE COVER (OR BACK). the operating instructions should be adhered to. NO US

Summary of the content on the page No. 4

PRODUCT DISCLAIMER CAUTION This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight of the bracket and camera assembly. Accordingly, 1. The installation should be made by a qualified installer. 2. The installation should be in compliance with local codes. 3. Care should be exercised to select suitable hardware to install the unit, taking into account both the compostition of the mounting surface and the weight the hardware will be requir