Summary of the content on the page No. 9
2: Introduction 2: Introduction The UDS2100 is a 2-port device server that provides a quick, simple, and cost- effective way to bring the advantages of data accessibility and remote management to devices not currently connected to a network. Applications The UDS family of Device Servers allows serial devices, such as those listed below, to connect and communicate over Ethernet networks using the IP protocol family (TCP for connection-oriented stream applications and UDP for datagram a
Summary of the content on the page No. 10
2: Introduction Figure 2-1. Serial Tunneling Example The Com Port Redirector software included on the product CD simplifies the integration process by extending the functionality of COM-port-based Windows™ applications. Virtual COM ports, mapped to remote device servers on the network, can replace direct serial connections. Figure 2-2. Direct TCP/IP or Redirector Configuration Note: For step-by-step instructions on configuring the UDS for serial tunneling or for use with the Com
Summary of the content on the page No. 11
2: Introduction Protocol Support The UDS uses the Internet Protocol (IP) for network communications and the Transmission Control Protocol (TCP) to assure that no data is lost or duplicated and that everything sent to the connection arrives correctly at the target. Supported protocols include: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, and SNMP for network communications. TCP, UDP, and Telnet for connections to the serial port. TFTP for firmware updates. IP for addressin
Summary of the content on the page No. 12
2: Introduction Product Information Label The product information label on the underside of the unit contains the following information about your specific unit: Bar code Serial number Product ID (name) Product description Hardware address (also referred to as the Ethernet or MAC address) The first three bytes of the hardware address are fixed and read 00-20-4A, identifying the unit as a Lantronix product. The fourth, fifth, and sixth bytes are unique numbers assigned to each u
Summary of the content on the page No. 13
3: Getting Started 3: Getting Started This chapter describes how to get your UDS up and running in the shortest possible time. Package Contents Verify and inspect the contents of the UDS2100 package using the following list. If any item is missing or damaged, contact your place of purchase immediately. UDS2100 DB9F to DB9F Null Modem Cable (P/N 500-164) Power supply CD with UDS2100 User Guide and utilities (DeviceInstaller and Com Port Redirector) Quick Start Guide UDS2100
Summary of the content on the page No. 14
3: Getting Started Installing the UDS Figure 3-1. UDS2100 Connected to Serial Device and Network To install the unit: To install the unit, complete the following steps in order. Refer to the numbers in the previous figure. 1. Connect a serial device to your unit. See 2: Introduction for more information about what kinds of device attachments the unit supports. 2. Connect an Ethernet cable to the 10/100 port. 3. Supply power to your unit using the power supply that was included in the
Summary of the content on the page No. 15
3: Getting Started Required Information Before configuring the UDS, have the following information available: Hardware Address Take note of the unit’s hardware address (also known as the Ethernet or MAC address). It is on the product label, in the format: 00-20-4a-XX-XX-XX, where the XXs are unique numbers assigned to the product Hardware Address: 00-20-4a-_____-_____-_____ IP Address The UDS must have a unique IP address on your network. This address references the specific unit.
Summary of the content on the page No. 16
3: Getting Started Assigning the IP Address: DeviceInstaller This chapter covers the steps for getting the UDS2100 device server online and for viewing its current configuration. Note: DeviceInstaller online Help provides more detailed information on using DeviceInstaller. Installing DeviceInstaller To use the DeviceInstaller utility, first install it from the product CD. 1. Insert the product CD into your CD-ROM drive. The Lantronix UDS2100 DeviceInstaller window displays. 2. If the C
Summary of the content on the page No. 17
3: Getting Started 7. Select the device from the main window list and select Ping from the Tools menu. The Ping Device dialog box shows the IP address of the selected unit. 8. From the Tools menu, click the Ping button. The results display in the Status window. Click the Clear Status button to clear the window so you can ping the device again. Note: If you do not receive “Reply” messages, make sure the unit is attached to the network properly and the IP address assigned is valid for the
Summary of the content on the page No. 18
3: Getting Started Table 3-1. Current Configuration Description Setting Name Configurable field. A name that identifies the UDS2100. Double-click the field, type in the value, and press Enter to complete. This name is not visible on other PCs or laptops using DeviceInstaller. Group Configurable field. A group name to categorize the UDS2100. Double-click the field, type in the value, and press Enter to complete. This group name is not visible on other PCs or laptops using DeviceInstall
Summary of the content on the page No. 19
3: Getting Started Description Setting Telnet Port Non-configurable field. Displays the UDS2100’s port for telnet sessions. Web Enabled Non-configurable field. Permits configuration through Web- Manager. Web Port Non-configurable field. Displays the UDS2100’s port for Web- Manager configuration. Maximum Baud Rate Non-configurable field. Displays the UDS2100’s maximum Supported baud rate. Note: The UDS2100 may not currently be running at this rate. Firmware Upgradeable Non-configurable
Summary of the content on the page No. 20
3: Getting Started Note: Alternatively, to open Web Manager, open your web browser and enter the IP address of the unit. To configure the unit using a Telnet session: 1. Click the Telnet Configuration tab. The Setup Mode window displays. 2. Press Enter within 5 seconds. 3. Continue with step 4 in 5: Configuration via Telnet or Serial Port (Setup Mode). Assigning the IP Address: Serial Port Login To assign the IP address and other network settings using a serial connection: 1. Connect
Summary of the content on the page No. 1
UDS2100
User Guide
Part Number 900-448
Revision D January 2009
Summary of the content on the page No. 2
Copyright & Trademark © 2007, 2008 Lantronix. All rights reserved. No part of the contents of this book may be transmitted or reproduced in any form or by any means without the written permission of Lantronix. Printed in the United States of America. Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of The Open Group. Windows 95, Windows 98, Windows 2000, and Windows NT are trademarks of Microsoft Corp. Netscape is a trademark of Netscape Communications Corpor
Summary of the content on the page No. 3
Contents 1: Using This Guide 7 Purpose and Audience _______________________________________________ 7 Chapter Summary ___________________________________________________ 7 Additional Documentation _____________________________________________ 8 2: Introduction 9 Applications ________________________________________________________ 9 Application Examples ________________________________________________ 9 Protocol Support ___________________________________________________ 11 Additional
Summary of the content on the page No. 4
Contents Serial Port Connection ___________________________________________ 37 Exiting Setup Mode _________________________________________________ 38 6: Setup Mode: Server Configuration 39 Server Configuration (Option 0)________________________________________ 39 IP Address________________________________________________________ 39 Set Gateway IP Address _____________________________________________ 39 Netmask: Number of Bits for Host Part __________________________________ 40 Set DNS
Summary of the content on the page No. 5
Contents SNMP Community Name _________________________________________ 58 Disable Telnet Setup_____________________________________________ 58 Disable TFTP Firmware Update ____________________________________ 58 Disable Port 77FE (Hex) __________________________________________ 59 Disable Web Server _____________________________________________ 59 Disable Web Setup ______________________________________________ 59 Disable ECHO Ports _____________________________________________ 59 Enabl
Summary of the content on the page No. 6
Contents Conversion Table _______________________________________________ 80 Scientific Calculator______________________________________________ 81 D: Warranty 82 E: Compliance and Disclaimer 83 Index 85 Figures Figure 2-1. Serial Tunneling Example _____________________________________ 10 Figure 2-2. Direct TCP/IP or Redirector Configuration ________________________ 10 Figure 2-3. Sample Hardware Address ____________________________________ 12 Figure 3-1. UDS2100 Connected to Serial
Summary of the content on the page No. 7
1: Using This Guide 1: Using This Guide Purpose and Audience This guide provides the information needed to configure, use, and update the UDS2100 device server. It is for system administrators and those responsible for installing and maintaining the UDS. Chapter Summary Table 1-1. Chapter Summary The remaining chapters in this guide Chapter Description 2: Introduction Describes the main features of the UDS and the protocols it supports. 3: Getting Started Provides information for
Summary of the content on the page No. 8
1: Using This Guide Chapter Description B: Alternative Ways to Assign an Provides detailed information about using DHCP, AutoIP, IP Address BOOTP ARP, and Telnet to assign an IP address. Error! Reference source not Provides instructions for converting binary values to found. Error! Reference source hexadecimal. not found. D: Warranty E: Compliance and Disclaimer Documentation Update For the latest revision of this product document, please check our online documentation at www.lantr
