Summary of the content on the page No. 1
Xds Xds Xds
Xds Xds
X-Array Double X-Array Double X-Array Double X-Array Double X-Array Double
Subwoofer System Subwoofer System Subwoofer System Subwoofer System Subwoofer System
Unprecedented acoustic output Unprecedented acoustic output Unprecedented acoustic output Unprecedented acoustic output Unprecedented acoustic output
in a small, lightweight package in a small, lightweight package in a small, lightweight package
in a small, lightweight package in a small, lightweight pac
Summary of the content on the page No. 2
Xds Double Subwoofer System cone, suspension geometry and materials, compact, lightweight systems provide the Full-Range Test, which uses a shaped- enclosure geometry and materials, absorp- highest acoustic-power-to-weight ratio, the random-noise signal to simulate typical tive materials, etc. The result is a dramatic highest acoustic-power-to-frontal-area ratio, music to test the mechanical and thermal improvement in clarity and with a much more and the highest acoustic-power-to-bulk-vol- capa
Summary of the content on the page No. 3
Xds Double Subwoofer System Xds Double Subwoofer System the X-Array loudspeaker systems. Digi- X-Array Amplifier Racks: These 16-U Architects and Engineers tal parameter settings for both controllers racks will hold four Electro-Voice P3000 Specifications are available upon request. power amplifiers, one Klark Teknik DN8000 The loudspeaker system shall be a two- digital controller, 1-U light module, and a 2- Electrical Connection and System driver, manifolded, vented-box low-fre- U multipi
Summary of the content on the page No. 4
Xds Double Subwoofer System Xds Double Subwoofer System state. Limited Warranty Electro-Voice Speakers and Speaker Sys- Electro-Voice products are guaranteed tems are guaranteed against malfunction due against malfunction due to defects in ma- to defects in materials or workmanship for a terials or workmanship for a specified pe- period of five (5) years from the date of origi- riod, as noted in the individual product- nal purchase. The Limited Warranty does not line statement(s) below, or in th
Summary of the content on the page No. 5
Xds Double Subwoofer System Xds Double Subwoofer System Xds Double Subwoofer System Figure 1 Polar Response The directional response of the Xds was measured in an anechoic environment at a distance of 6.1 m (20 ft.) using 1/3-octave-filtered pink noise with a full spherical measurement system. The polar response of the loudspeaker system at selected 1/3-octave frequencies is shown. The selected frequencies are representative of the polar response of the system. Vertical Horizontal 5 dB per di
Summary of the content on the page No. 6
Xds Double Subwoofer System Figure 2 Frequency Response The frequency response of the Xds was mea- sured on axis in the far field in an anechoic environment using a swept sine-wave sig- nal. The Klark Teknik DN8000 digital elec- tronic unit was used to provide the neces- sary crossover filters, equalization and time delay. One watt of power (2.00-volts rms at 70 Hz) was applied to the mid band of the low-frequency section. The sound pressure level was normalized for an equivalent one- meter di
Summary of the content on the page No. 7
Xds Double Subwoofer System Xds Double Subwoofer System Figure 5 Distortion Distortion for the Xds was measured on axis in the far field in an anechoic environment with an input signal that would result in a sound pressure level of 115 dB at one meter. The Klark Teknik DN8000 digital electronic unit was used to provide the necessary cross- over filters, equalization and time delay. The sound pressure level was normalized for an equivalent one-meter distance. Plots of sec- ond and third harmoni
Summary of the content on the page No. 8
Xds Double Subwoofer System Figure 8Dimensions indicated one-third-octave bands of Input Connections: Specifications ® pink noise; see Figures 1 and 3), Two Neutrik NL8MPR Speakon Horizontal, 63-200 Hz: connectors paralleled Frequency Response (measured in far 180° (+180°, -40°) Recommended Amplifier Power, field, with and without crossover and Vertical, 63-200 Hz: Rating: equalization, calculated to one meter 200° (+160°, -80°) 800 watts per channel @ 8 ohms on axis, swept sine wave, one watt