MTX Audio Thunder T4510-44 user manual

Summary of the content on the page No. 1

T4510-44
Parameters
Los parámetros, Paramètres, Parameter
F : 39.07 Hz
s
Q : 8.36
ms
C : 0.200 mm/N
ms
M : 82.97 g
ms
R : 2.44 kg/s
ms
V : 1.430 ft³ (40.50 liters)
as
X : 0.370 in (9.40 mm)
max
D: 8.661 in (220.00 mm)
S : 58.92 in² (380.13 cm ²)
d
V : 21.80 in³ (0.36 liters)
d
Q : 0.81
es
R : 1.63 Ω
e
B : 6.40 Tm
l
P : 225 Watts
rms
Q : 0.738
ts
η : 0.287 %
ο
SPLo: 87.40 dB
SPL : 93.61 dB
2.83V/1m
Specifications

Las especificaciones , Spécifications, Spezifikation

Summary of the content on the page No. 2

T4510-44 Sealed Enclosure El Cerco sellado, Clôture scellée, Abgedichtete Einschließung For the best possible sound quality where space is a premium, MTX recommends using a sealed enclosure. For excellent sound quality with increased output compared to sealed enclosures (3dB or more), MTX recommends using a vented enclosure. All recommended enclosures have been designed and thoroughly tested by MTX. 13 1/4" (336 mm) 12" (305 mm) Net Internal Volume: 0.75

Summary of the content on the page No. 3

T4510-44 Vented Enclosure Descargar Cerco, Clôture donnere vent, Vented Einschließung For the best possible sound quality where space is a premium, MTX recommends using a sealed enclosure. For excellent sound quality with increased output compared to sealed enclosures (3dB or more), MTX recommends using a vented enclosure. All recommended enclosures have been designed and thoroughly tested by MTX. 14 7/16" (366.2 mm) 20 1/2" (520.7 mm) 13 1/2" (342.9 mm)

Summary of the content on the page No. 4

Wiring Configuration La Configuración del alambrado, La Configuración del alambrado, Verdrahtende Konfiguration + + AMP AMP - - With coils wired in parallel Con rollos alambró en la paralela, Avec les bobines With coils wired in series (Con rollos alambró en la serie, Avec les bobines télégraphiées dans l'analogie, Mit Windungen hat parallel verdrahtet): télégraphiées dans le feuilleton, Mit Windungen, die in Serie verdrahtet werden): A dual 4 Ω speaker will represent a 2 Ω load