Summary of the content on the page No. 1
UDWC23 Accessory Camera User’s Manual
What’s in the Box
If any items are
missing or damaged,
contact our Customer
Care Line immediately.
Never use damaged
Camera stand
products!
AC adapter
Portable video camera
Need Help? Get answers 24/7 at our website: www.uniden.com.
If You... Contact Uniden’s... Phone Number
817-858-2929 or
have a question or problem Customer Care Line*
800-297-1023
need a replacement part or accessory Parts Department* 800-554-3988
Accessibility Help 800-874-9
Summary of the content on the page No. 2
Important Safety Instructions! This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: ► This equipment is NOT waterproof. DO NOT expose it to rain or moisture. ► DO NOT immerse any part of the product in water. Do not
Summary of the content on the page No. 3
to make sure that you and your parent or guardian understand these terms, conditions, and safety warnings. ► Allow for proper ventilation when units are in use. Do not cover the camera or receiver with any object such as a blanket. Do not place it in a drawer or in any location which would muffle the sound or interfere with the normal flow of air. SAVE THESE INSTRUCTIONS! For best results: To avoid damage to your equipment, follow these simple precautions: ► Do not drop, puncture or disassem
Summary of the content on the page No. 4
Getting Started Connecting the Power 1. Connect one end of the AC adapter Battery Battery to the camera’s status status power connector Link Link and the other status status end to a standard Power Power Antenna Antenna 120 volt AC status status outlet. Lens Lens 2. Press the POWER button on the camera; the POWER POWER Power status light LINK LINK should turn on. Power Power If it doesn’t, try connector connector reconnecting the Stand Stand AC adapter, and make sure the power
Summary of the content on the page No. 5
Learning the Buttons and Lights Button What it does POWER Turn the camera on. Press and hold to turn it off. LINk Enter pairing mode. Light State What it means On The camera is on. Power Status light Off The camera is off. Flashing The camera is in pairing mode. Link Status Orange The camera is connected to the receiver. light Off The camera is in standby. Green The battery is charging. Battery Red The battery is low; the camera will turn off in 3 minutes. Status light Off The battery is ful
Summary of the content on the page No. 6
Mounting Mounting Camera Camera screw screw 1. Hold the base of the mount where you want brace brace to attach it, and mark the location of the screw holes. Mounting Mounting 2. Use the included screws and anchors to post post attach the base to the wall or ceiling. Post Post lock lock 3. Attach the camera to the mounting screw. Tighten it a few turns, then turn it to the direction you want. 4. Tighten the camera brace up against the back of the camera to secure it into place. Screw Sc
Summary of the content on the page No. 7
Pairing the Camera Before you can use the camera, you’ll need to “introduce” or pair it to the receiver so they can communicate. You might also perform the pairing procedure if you are having trouble with the camera. 1. Make sure the camera is powered on. 2. On the receiver, select the channel you want to pair this camera to, and put the receiver into pairing mode. (This process is slightly different on each receiver. See the manual that came with your receiver for instructions.) 3. On the c
Summary of the content on the page No. 8
Additional Information Product Specifications Radio Frequency Transceiver RF Frequency 2402 Mhz ~ 2483.5 Mhz Modulation GFSK Spread spectrum Frequency Hopping Anti Interference Clean Channel Dynamic Select Data rate 2 Mbps Channel bandwidth 2 MHz Transmitting range 200 meters/600 feet in an open area (line of sight) Image Specification Output Image resolution 640 x 480 (VGA)/ 320 x 240 (QVGA) Image processing Motion JPEG Exposure Auto White balance Auto Camera Specifications Weight 110 g Dimensi
Summary of the content on the page No. 9
Camera Specifications Low light solution 11 IR LEDs, 1 Low light sensor Low light sensitivity 1-8 lux Picture sensor OV7725 1/4’ Color CMOS Lens F3.6mm H:53 V:40 Polymer-Lithium Battery Warning CAUTION! Risk of explosion if battery is replaced by an incorrect type! ► This equipment contains a rechargeable polymer-lithium battery. ► Do not attempt to charge the battery in temperatures below 0° C (32° F) or higher than 45° C (113° F ) ► Dispose of used batteries according to the instructions.
Summary of the content on the page No. 10
FCC Compliance Information Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules and ETSI (EN) 300328. These limi
Summary of the content on the page No. 11
IC Compliance Information Radio Equipment Notice The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. “Privacy of communications may not be ensured when using this device”. CE Compliance Information Produ
Summary of the content on the page No. 12
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit & return it to you without charge for parts, service, or any other cost (except shipping & handling) incurred by warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED
