Summary of the content on the page No. 1
Wireless
900 MHZ WIRELESS STEREO SPEAKERS
INSTALLATION AND
OPERATING INSTRUCTIONS
AW820
Summary of the content on the page No. 2
Wireless Stereo Speakers Installation and Operation Manual Model AW820 CONTENTS Connect the Transmitter .............................................................................................. 4 Power the Speakers .................................................................................................... 5 Adjust the Transmitter.................................................................................................. 6 Tune the Headphones ..................................
Summary of the content on the page No. 3
Front Back A. Tuning Indicator Light B. Tuning Control Wheel A C. Left/Monaural/Right Switch D. Power ON-OFF/Volume Control Wheel OFF LR TUNING MONO POWER/VOLUME E. Battery Compartment Cover F. Speaker Power Input Jack B C D E F G. Mounting Bracket Bolt Hole - see (S) G H. Audio Level Indicator Light I. Charge Output Jack – for use with Advent AW770 and AW720 Wireless Bottom Headphones only N J. Transmitter Power Input Jack M H DC 12V FREQ. CHARGE LEVEL ADJUST K. Output Level Control Wheel L. Au
Summary of the content on the page No. 4
UL MODEL: 35-12-150C E1A 172 9310 D MADE IN CHINA I DIRECT PLUG-IN CLASS 2 TRANSFORMER 1\P: 120V AC 60HZ 5W D/P 12V DC 150mA 9 L 2 N S5 TED E100839 LR 98553 CONNECT THE TRANSMITTER Connect the transmitter as follows: Transmitter Power Input Jack (J) Step 1 Power the Transmitter DC 12V FREQ. CHARGE LEVEL ADJUST 1. Insert the power cord from Transmitter AC Adapter (O) into the Transmitter Power Input
Summary of the content on the page No. 5
Battery Battery Battery Battery WARNING: DO NOT connect the RCA plugs of the “Y” Cable Adapter to a speaker output on the audio source. If you use the speaker output of an audio source to connect the transmitter, you will permanently damage the transmitter. It is designed to work with RCA-type line/variable outputs or headphone outputs only. Note: For more information on hooking up and using the transmitter with various ouputs, please see MORE HELPFUL INFORMATION beginning on Page 7. POWER THE S
Summary of the content on the page No. 6
ADJUST THE TRANSMITTER Adjust the transmitter as follows. Step 1 Turn ON your Audio Source (i.e. Stereo Receiver, TV, etc.) so that you can hear sound coming from the source. Step 2 Pivot the Antenna (N) to the upright, vertical position. Step 3 Set the Transmitter “Level” Audio Level Indicator Light (H) 1. Set the Frequency Control Wheel (M) to its midpoint. 2. Turn the Output Level Control Wheel (K) all the way to the left (your left when looking at the transmitter controls), as shown. 3. C
Summary of the content on the page No. 7
Tuning Indicator Turn On and Tune the Speakers Light (A) 1. Use the speaker Power ON-OFF/Volume Control Wheel (D) to turn the speaker “ON.” Tuning Indicator Light (A) will illuminate red. 2. Turn the Tuning Control Wheel (B) until the Tuning Indicator Light changes color to green, indicating the speaker is tuned to the signal from the transmitter. If the audio source is on and operating, you should now hear sound. OFF Tuning Control LR TUNING MONO POWER/VOLUME 3. Adjust volume as desired.
Summary of the content on the page No. 8
Hint: Fixed-level audio outputs from stereo receivers/amps will typically be desig- nated as Tape, Tape 1, and Tape 2 outputs, DAT (digital audio tape) outputs, VCR audio output connections, and auxiliary audio outputs. Tape, Tape 1, Tape 2 and DAT outputs are usually marked as ‘TAPE OUTPUT,’ ‘TAPE OUT,’ ‘TAPE REC,’ or ‘TAPE RECORD.’ Jacks designated for phono, CD, LD, DVD or tape playback (PB) are inputs and will not work for purposes of installing the transmitter. Fixed-level outputs from TV
Summary of the content on the page No. 9
Hint: Most TVs, regardless of age or price, have variable outputs. If you are unsure which, if any of your outputs is fixed, refer to the TV instruction manual. Some TVs have outputs that can switch between variable and fixed. Refer to the TV instruc- tion manual. When given a choice, fixed is always recommended. TROUBLESHOOTING The following troubleshooting guide takes you through some of the more common problems and corrections associated with the installation and/or operation of a wireless sy
Summary of the content on the page No. 10
Trouble Checks and Adjustments No Sound/ • If using battery power, batteries may be low. Replace if necessary. Distortion/ Static • Check that the speaker Tuning Indicator Light is illuminated green. If not, adjust the Tuning Control Wheel until the light changes from red to green. • Check that the antenna is in the upright position. • Check that the Transmitter Audio Level Indicator Light is flickering intermittently. If you are using a fixed output and the light is on solid or flickering ver
Summary of the content on the page No. 11
SPECIFICATIONS & FEATURES Transmitter Omnidirectional Effective Transmitting Range: Up to 300 feet* Adjustable Audio Level Input Variable Frequency Adjustment between 912.5 and 914.5 MHz Line Audio Input with 3.5mm Stereo Mini Plug Plus 1/4" and Composite “Y” Cable Adapters UL-Listed AC Adapters Speakers 10 Watts Per Channel RMS (each speaker) Two-Way Speaker Design Acoustic Suspension Design 1" Dome Tweeter; 4" Woofer Integrated Power/Volume Control (front face) Individual Frequency Fine Tunin
Summary of the content on the page No. 12
WARRANTY ONE YEAR LIMITED WARRANTY Recoton Corporation (the Company) warrants to the original retail purchaser of this product that should the product or any part thereof be proven defective in material or workmanship within One Year from the date of original purchase, such defects will be replaced without charge for parts or labor. This warranty does not apply to any incidental or consequential damages. To obtain replacement within the terms of this warranty, the product should be delivered, tr
