Crate Amplifiers CA15 user manual

Summary of the content on the page No. 1

CA15
Acoustic Amplifier
User’s Guide

Summary of the content on the page No. 2

CA15 Acoustic Amplifier Introduction: Congratulations! You are now the proud owner of one of Crate’s latest contributions to the world of acoustic amplification, the CA15. This compact amplifier delivers over 12 watts of musical power and incorporates two inputs (each with its own gain control), three bands of equalization, and reverb. A pair of RCA- type CD Input jacks allow you to practice with your favorite music. A jack for headphones is provided, along with a jack for connecting the CA15

Summary of the content on the page No. 3

CA15 Acoustic Amplifier The Front Panel: 1 2 3 4 5 6 7 8 9 10 11 1,3: Input 1, Input 2. The signal output from 9: CD Input. Use these jacks to connect the your acoustic instrument, tape player, output from a CD player, tape deck, or rhythm machine, high-Z microphone or rhythm machine to the amplifier. The CD other source may be connected to either or Input jacks are post EQ and Gain, so use both of these jacks by means of a shielded the level control on the CD player (etc.) to signal cable. Each

Summary of the content on the page No. 4

CA15 Acoustic Amplifier Technical Specifications: Output Power Rating: 12+ watts RMS @ 5% THD, 4 ohm load Low: ±15dB @ 80Hz Mid: ±15dB @ 650Hz High: ±15dB @ 10kHz Input Impedance: 1.5M ohm Max Input Signal: 7v peak to peak Total System Gain: 52dB @ 1kHz Input Sensitivity: 20mV Internal Speakers: 8” Crate Custom Design, 4 ohm, 15 watts; Piezo Tweeter Power Requirements: 120VAC, 60Hz, 30VA 100/115VAC, 50/60Hz, 30VA 230VAC, 50/60Hz, 30VA Size and Weight: 14”H x 14”W x 12”D, 21 lbs. System Block Dia